mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-16 10:55:21 +01:00
78 lines
2.3 KiB
ReStructuredText
78 lines
2.3 KiB
ReStructuredText
AM43 Cover
|
|
==========
|
|
|
|
.. seo::
|
|
:description: Setting up AM43/BLE covers in ESPHome.
|
|
:image: am43.jpg
|
|
|
|
The ``am43`` cover platform allows you to control an AM43 based
|
|
BLE cover motor. These devices are sold under various brands, such
|
|
as Zemismart and A-OK. The platform connects to the device over the
|
|
ESP32's BLE peripheral and both controls and fetches the position
|
|
and state of the motor.
|
|
|
|
.. note::
|
|
|
|
This component does NOT support Tuya-based versions of this device,
|
|
as the protocol is completely different. If your device is controlled
|
|
with the SmartLife app, then it will not work.
|
|
|
|
.. figure:: images/am43.jpg
|
|
:align: right
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
|
|
esp32_ble_tracker:
|
|
|
|
ble_client:
|
|
- mac_address: AA:BB:CC:DD:EE:FF
|
|
id: am43_kitchen
|
|
|
|
cover:
|
|
- platform: am43
|
|
name: "Kitchen blinds"
|
|
ble_client_id: am43_kitchen
|
|
|
|
Setup
|
|
-----
|
|
|
|
The AM43 should first be setup either with the OEM app or the buttons
|
|
following the instruction sheet, so that the speed, direction, limits,
|
|
etc are programmed in (this component does not yet support setting these).
|
|
|
|
Once setup, configure the yaml per the above example, using the MAC
|
|
address of your device.
|
|
See :ref:`Setting up devices <esp32_ble_tracker-setting_up_devices>` for
|
|
how to discover the MAC address.
|
|
|
|
To make use of the battery and light level sensors, see the
|
|
:doc:`/components/sensor/am43` component.
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name of the cover.
|
|
- **ble_client_id** (**Required**, :ref:`config-id`): The id of the ``ble_client`` entry associated with the device.
|
|
- **pin** (*Optional*, int): The pin for the device, as
|
|
set in the app. The default is usually printed on the
|
|
device. Defaults to ``8888``.
|
|
- **invert_position** (*Optional*, boolean): Inverts the position value to and from the device. Set if ESPHome is swapping around the open/close state of the cover.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Cover <config-cover>`.
|
|
|
|
|
|
.. note::
|
|
|
|
The BLE stack on the ESP32 has a limit of three connected devices.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :ref:`automation`
|
|
- :apiref:`am43/am43_cover.h`
|
|
- :ghedit:`Edit`
|