mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-16 10:55:21 +01:00
94 lines
2.4 KiB
ReStructuredText
94 lines
2.4 KiB
ReStructuredText
LightWaveRF
|
|
===========
|
|
|
|
.. seo::
|
|
:description: LightWaveRF Switch Lights
|
|
:image: brightness-medium.svg
|
|
|
|
The ``LightWaveRF`` light platform creates a module to dump and send commands to light switches
|
|
|
|
.. figure:: images/lightwaverf.jpg
|
|
:align: center
|
|
:width: 40.0%
|
|
|
|
LightwaveRF switches are very common in UK automation. They allow control of lights, sockets, relays and more via RF remote or via a hub.
|
|
Using an inexpensive RF transmitter and receiver you can control your devices via ESPHome.
|
|
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
|
|
# Specify the two pins to connect the receiver and transmitter
|
|
lightwaverf:
|
|
read_pin: 13
|
|
write_pin: 14
|
|
|
|
# Create a switch to trigger a light
|
|
switch:
|
|
- platform: template
|
|
name: "Turn off sofa"
|
|
id: light_off_ceiling_sofa
|
|
turn_on_action:
|
|
lightwaverf.send_raw:
|
|
code: [0x04, 0x00, 0x00, 0x00, 0x0f, 0x03, 0x0d, 0x09, 0x08, 0x08]
|
|
name: "Sofa"
|
|
repeat: 1
|
|
|
|
|
|
Note: To gather the RAW codes from the remote, setup the ``read_pin`` and observe in the logs the printing of the codes.
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **read_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin that the receiver is connected to
|
|
- **write_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): the pin that the transmitter is connected to
|
|
|
|
|
|
.. lightwaverf.send_raw:
|
|
|
|
|
|
``lightwaverf.send_raw`` Action
|
|
--------------------------------
|
|
|
|
Send the raw data that has been captured via the dump system
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- lightwaverf.send_raw:
|
|
code: [0x04, 0x00, 0x00, 0x00, 0x0f, 0x03, 0x0d, 0x09, 0x08, 0x08]
|
|
name: "Sofa"
|
|
repeat: 1
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (*Optional*, string): The name to give for the action
|
|
- **code** (**Required**, list hex): The raw dump in an array of hex
|
|
- **repeat** (*Optional*, int): The number of times the message will be repeated
|
|
- **inverted** (*Optional*, boolean): Send the signal inverted
|
|
|
|
|
|
Compatible Hardware
|
|
-------------------
|
|
|
|
The RF transmitters/receivers listed below have been confirmed to work with the current code base. If you discover others that work, please let us know!
|
|
|
|
Compatible transmitter:
|
|
|
|
- MX-FS-03V
|
|
|
|
Compatible receiver:
|
|
|
|
- RXB6
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/light/index`
|
|
- :ghedit:`Edit`
|