mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-12 10:24:00 +01:00
5e517bb13f
* [light] Tidy up name/id * Update components/light/shelly_dimmer.rst --------- Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
62 lines
2.1 KiB
ReStructuredText
62 lines
2.1 KiB
ReStructuredText
Status LED Light
|
|
================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Status LED shared also as binary ON/OFF light in ESPHome.
|
|
:image: led-on.svg
|
|
|
|
The ``status_led`` light platform allows to share a single LED for indicating the status of
|
|
the device (when on error/warning state) or as binary light (when on OK state).
|
|
This is useful for devices with only one LED available.
|
|
You can also use a binary :ref:`output`.
|
|
|
|
It provides the combined functionality of :doc:`status_led component </components/status_led>` and a
|
|
:doc:`binary light component </components/light/binary>` over a single shared GPIO led.
|
|
|
|
When the device is on error/warning state, the function of ``status_led`` will take precedence and control the blinking of the LED.
|
|
When the device is in OK state, the LED will be restored to the state of the ``binary light`` function and can be controlled as such.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
light:
|
|
- platform: status_led
|
|
name: "Switch state"
|
|
pin: GPIOXX
|
|
|
|
.. note::
|
|
|
|
When using this platform the high level ``status_led`` component should not be included (at least over the same pin),
|
|
as its functionality is directly provided by this platform.
|
|
|
|
The only difference is that the platform won't be loaded in OTA safe mode, while the component would be.
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The GPIO pin to operate the LED on.
|
|
- **output** (*Optional*, :ref:`config-id`): The id of the binary :ref:`output` to use for this light.
|
|
- All other options from :ref:`Light <config-light>`.
|
|
|
|
.. note::
|
|
|
|
If your Status LED is in an active-LOW mode (such as with the D1 Mini ESP8266 boards), use the
|
|
``inverted`` option of the :ref:`Pin Schema <config-pin_schema>`:
|
|
|
|
.. code-block:: yaml
|
|
|
|
pin:
|
|
number: GPIOXX
|
|
inverted: true
|
|
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/status_led`
|
|
- :doc:`/components/light/binary`
|
|
- :doc:`/components/light/index`
|
|
- :apiref:`status_led/light/status_led_light.h`
|
|
- :ghedit:`Edit`
|