192 lines
5.6 KiB
ReStructuredText
192 lines
5.6 KiB
ReStructuredText
Rtttl Buzzer
|
|
============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a buzzer to play tones and rtttl songs with ESPHome.
|
|
**NEW:** Or play the song using the I2S speaker.
|
|
:image: buzzer.jpg
|
|
|
|
The ``rtttl``, component allows you to easily connect a passive piezo buzzer to your microcontroller
|
|
and play monophonic songs. It accepts the Ring Tone Text Transfer Language, rtttl format (`Wikipedia
|
|
<https://en.wikipedia.org/wiki/Ring_Tone_Transfer_Language>`__) which allows to store simple melodies.
|
|
|
|
.. figure:: images/buzzer.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Buzzer Module
|
|
|
|
Overview Using a passive buzzer
|
|
-------------------------------
|
|
|
|
It's important that your buzzer is a **passive** one, if it beeps when you feed it with 3.3V then it is not
|
|
a passive one and this library will not work properly.
|
|
|
|
The tone generator needs a PWM capable output to work with, currently only the
|
|
:doc:`ESP8266 Software PWM Output<output/esp8266_pwm>` and
|
|
:doc:`ESP32 LEDC Output <output/ledc>` are supported.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
output:
|
|
- platform: ...
|
|
id: rtttl_out
|
|
...
|
|
|
|
rtttl:
|
|
output: rtttl_out
|
|
id: my_rtttl
|
|
gain: 60%
|
|
|
|
Overview Using the I2S speaker
|
|
------------------------------
|
|
|
|
The tone generator can instead be used with a :doc:`Speaker </components/speaker/index>` to output the audio.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
speaker:
|
|
- platform: ...
|
|
id: my_speaker
|
|
...
|
|
|
|
rtttl:
|
|
speaker: my_speaker
|
|
id: my_rtttl
|
|
gain: 0.8
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **output** (**Exclusive**, :ref:`config-id`): The id of the :ref:`float output <output>` to use for
|
|
this buzzer.
|
|
- **speaker** (**Exclusive**, :ref:`config-id`): The id of the :ref:`speaker <i2s_audio>` to play the song on.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **gain** (*Optional*, Percentage): With this value you can set the volume of the sound.
|
|
- **on_finished_playback** (*Optional*, :ref:`Automation <automation>`): An action to be
|
|
performed when playback is finished.
|
|
|
|
Note: You can only use the **output** or **speaker** variable, not both at the same time.
|
|
|
|
``rtttl.play`` Action
|
|
---------------------
|
|
|
|
Plays an rtttl tone.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- rtttl.play: 'siren:d=8,o=5,b=100:d,e,d,e,d,e,d,e'
|
|
|
|
Configuration options:
|
|
|
|
- **rtttl** (**Required**, string, :ref:`templatable <config-templatable>`): The rtttl string.
|
|
|
|
You can find many rtttl strings online on the web, they must start with a name, then a colon: ``:`` symbol
|
|
and more codes of the song itself. Tip: you can try playing with the values of d=16,o=6,b=95 and make the
|
|
song play at a different pace or pitch, e.g. setting o=7 instead will cause the song to play on a higher pitch.
|
|
|
|
|
|
``rtttl.stop`` Action
|
|
---------------------
|
|
|
|
Stops playback.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- rtttl.stop
|
|
|
|
All actions
|
|
-----------
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID of the rtttl if you have multiple components.
|
|
|
|
``rtttl.is_playing`` Condition
|
|
------------------------------
|
|
|
|
This Condition returns true while playback is active.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# In some trigger:
|
|
on_...:
|
|
if:
|
|
condition:
|
|
rtttl.is_playing
|
|
then:
|
|
logger.log: 'Playback is active!'
|
|
|
|
|
|
Common beeps
|
|
------------
|
|
|
|
You can do your own beep patterns too! Here's a short collection so you can just use right away or tweak them to your like:
|
|
|
|
.. code-block::
|
|
|
|
two_short:d=4,o=5,b=100:16e6,16e6
|
|
long:d=1,o=5,b=100:e6
|
|
siren:d=8,o=5,b=100:d,e,d,e,d,e,d,e
|
|
scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b
|
|
star_wars:d=16,o=5,b=100:4e,4e,4e,8c,p,g,4e,8c,p,g,4e,4p,4b,4b,4b,8c6,p,g,4d#,8c,p,g,4e,8p
|
|
mission_imp:d=16,o=6,b=95:32d,32d#,32d,32d#,32d,32d#,32d,32d#,32d,32d,32d#,32e,32f,32f#,32g,g,8p,g,8p,a#,p,c7,p,g,8p,g,8p,f,p,f#,p,g,8p,g,8p,a#,p,c7,p,g,8p,g,8p,f,p,f#,p,a#,g,2d,32p,a#,g,2c#,32p,a#,g,2c,a#5,8c,2p,32p,a#5,g5,2f#,32p,a#5,g5,2f,32p,a#5,g5,2e,d#,8d
|
|
mario:d=4,o=5,b=100:16e6,16e6,32p,8e6,16c6,8e6,8g6,8p,8g,8p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,16p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16c7,16p,16c7,16c7,p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16d#6,8p,16d6,8p,16c6
|
|
|
|
|
|
Test setup
|
|
----------
|
|
|
|
With the following code you can quickly setup a node and use Home Assistant's service in the developer tools.
|
|
E.g. for calling ``rtttl.play`` select the service ``esphome.test_esp8266_rtttl_play`` and in service data enter
|
|
|
|
.. code-block:: yaml
|
|
|
|
song_str: 'scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b'
|
|
|
|
Sample code
|
|
***********
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: test_esp8266
|
|
|
|
esp8266:
|
|
board: nodemcuv2
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
pin: D1
|
|
id: rtttl_out
|
|
|
|
rtttl:
|
|
output: rtttl_out
|
|
on_finished_playback:
|
|
- logger.log: 'Song ended!'
|
|
|
|
api:
|
|
services:
|
|
- service: play_rtttl
|
|
variables:
|
|
song_str: string
|
|
then:
|
|
- rtttl.play:
|
|
rtttl: !lambda 'return song_str;'
|
|
|
|
See Also
|
|
--------
|
|
- :doc:`/components/output/esp8266_pwm`
|
|
- :doc:`/components/output/ledc`
|
|
- :doc:`/components/speaker/index`
|
|
- :apiref:`rtttl/rtttl.h`
|
|
- :ghedit:`Edit`
|