mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-10 10:11:29 +01:00
139 lines
4.3 KiB
ReStructuredText
139 lines
4.3 KiB
ReStructuredText
EMC2101 Fan Controller and Temperature sensor
|
|
=============================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up EMC2101 fan controller and temperature sensor in ESPHome.
|
|
:image: emc2101.jpg
|
|
:keywords: EMC2101
|
|
|
|
The ``emc2101`` component allows you to control a cooling fan from ESPHome (`datasheet <https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/EMC2101-Data-Sheet-DS20006703.pdf>`__). It also provides temperature
|
|
sensors and a tachometer. The fan can be controlled either by a PWM signal or by outputing a DC voltage
|
|
using its DAC.
|
|
|
|
The :ref:`I²C Bus <i2c>` is required to be set up in your configuration for this sensor to work.
|
|
|
|
.. figure:: images/emc2101-full.png
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
EMC2101 Fan Controller and Temperature sensor
|
|
|
|
.. note::
|
|
|
|
Original image at https://learn.adafruit.com/assets/97827 created by
|
|
by user `Bryan Siepert <https://learn.adafruit.com/u/siddacious>`__ under
|
|
`Creative Commons BY-SA 3.0 <https://creativecommons.org/licenses/by-sa/3.0/>`__ and modified
|
|
for this documentation.
|
|
|
|
|
|
|
|
EMC2101 Component
|
|
-----------------
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
emc2101:
|
|
pwm:
|
|
resolution: 8
|
|
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x4C``.
|
|
- **inverted** (*Optional*, boolean): Inverts the output so 0 means 100% duty cycle and 1 means 0%. Defaults to ``false``.
|
|
- **pwm** (*Optional*): Enable PWM output.
|
|
|
|
- **resolution** (*Optional*, int): Determines effective resolution and the frequency of the PWM signal. Defaults to ``23``.
|
|
- **divider** (*Optional*, int): Value for the frequency divider. Defaults to ``1``.
|
|
|
|
- **dac** (*Optional*): Enable DAC output.
|
|
|
|
- **conversion_rate** (*Optional*, string): The number of digital to analog conversions perfomed per second. One of ``1/16``, ``1/8``,
|
|
``1/4``, ``1/2``, ``1``, ``2``, ``4``, ``8``, ``16``, ``32``. Defaults to ``16``.
|
|
|
|
|
|
The PWM signal frequency is determined by the following formula:
|
|
|
|
.. math::
|
|
|
|
\text{PWM Frequency} = \frac{360KHz}{2 \times resolution \times divider}
|
|
|
|
And the PWM resolution, the steps in the duty cycle, is calculated by the following formula:
|
|
|
|
.. math::
|
|
|
|
\text{PWM resolution} = \frac{100\%}{2 \times resolution}
|
|
|
|
So, with the default values the PWM signal will have a frequency of 7.83KHz and a resolution of 2.17%. The maximum
|
|
resolution value is ``31`` which will configure a frequency of 5.81KHz with a resolution of 1.61%.
|
|
|
|
|
|
|
|
EMC2101 Output
|
|
--------------
|
|
|
|
.. code-block:: yaml
|
|
|
|
output:
|
|
- platform: emc2101
|
|
id: fan_duty_cycle
|
|
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **id** (**Required**, :ref:`config-id`): The ID to use for code generation, and for reference by dependent components.
|
|
|
|
.. note::
|
|
|
|
When using the ``emc2101`` output with a :doc:`/components/fan/speed` it is advised to configure the **speed_count**
|
|
as twice the **resolution** so the number of speeds in the fan matches the number of steps in the fan controller.
|
|
|
|
|
|
|
|
EMC2101 Sensors
|
|
---------------
|
|
|
|
.. code-block:: yaml
|
|
|
|
sensor:
|
|
- platform: emc2101
|
|
internal_temperature:
|
|
id: internal_temperature_sensor
|
|
name: "Internal Temperature Sensor"
|
|
speed:
|
|
id: speed_sensor
|
|
name: "Speed Sensor"
|
|
duty_cycle:
|
|
id: duty_cycle_sensor
|
|
name: "Duty Cycle Sensor"
|
|
update_interval: 5s
|
|
|
|
|
|
Configuration variables:
|
|
************************
|
|
- **internal_temperature** (*Optional*): The internal temperature sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **external_temperature** (*Optional*): The external temperature sensor. More accurate but it needs an additional transistor to be installed.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **speed** (*Optional*): The fan speed sensor in RPMs.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **duty_cycle** (*Optional*): Duty cycle sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`config-sensor`
|
|
- :doc:`/components/fan/speed`
|
|
- :apiref:`emc2101/emc2101.h`
|
|
- :ghedit:`Edit`
|