esphome-docs/components/fan/tuya.rst
2024-08-14 02:48:47 +00:00

73 lines
2.3 KiB
ReStructuredText

Tuya Fan
========
.. seo::
:description: Instructions for setting up a Tuya ceiling fan switch.
:image: fan.svg
The ``tuya`` fan platform creates a variable speed fan from a
tuya component.
.. figure:: images/tuyafan.jpg
:align: center
:width: 40%
A Tuya based fan controller wall plate.
The Tuya fan requires a :doc:`/components/tuya` to be configured.
Here is an example output for a Tuya fan controller:
.. code-block:: text
[12:39:45][C][tuya:023]: Tuya:
[12:39:45][C][tuya:032]: Datapoint 1: switch (value: ON)
[12:39:45][C][tuya:036]: Datapoint 3: enum (value: 1)
[12:39:45][C][tuya:036]: Datapoint 6: enum (value: 0)
[12:39:45][C][tuya:034]: Datapoint 7: int value (value: 0)
[12:39:45][C][tuya:032]: Datapoint 9: switch (value: OFF)
[12:39:45][C][tuya:046]: Product: '{"p":"hqq73kftvzh8c92u","v":"1.0.0","m":0}'
On this controller, the data points are:
- 1 represents the fan on/off state.
- 3 represents the speed setting.
- 9 represents the additional light switch. (use the :doc:`/components/light/tuya` component to control this)
- 6 & 7 are unknown and don't seem to affect the state.
Based on this, you can create the fan as follows:
.. code-block:: yaml
# Create a fan
fan:
- platform: "tuya"
name: "MyFan"
switch_datapoint: 1
speed_datapoint: 3
Configuration variables:
------------------------
- **speed_datapoint** (**Required**, int): The datapoint id number of the fan speed.
- **switch_datapoint** (**Required**, int): The datapoint id number of the fan switch.
- **oscillation_datapoint** (*Optional*, int): The datapoint id number of the oscillation
switch. Probably not supported on any Tuya controllers currently, but it's there if need be.
- **direction_datapoint** (*Optional*, int): The datapoint id number of the direction
switch. Supported by some ceiling fans.
- **speed_count** (*Optional*, int): Set the number of supported discrete speed levels. Defaults to ``3``.
- All other options from :ref:`Fan <config-fan>`.
.. note::
The MCU on the Tuya dimmer handles the LEDs and they dont seem to be controllable
over the serial bus.
See Also
--------
- :doc:`/components/tuya`
- :doc:`/components/fan/index`
- :apiref:`tuya/fan/tuya_fan.h`
- :ghedit:`Edit`