mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-10 10:11:29 +01:00
286 lines
8.9 KiB
ReStructuredText
286 lines
8.9 KiB
ReStructuredText
.. _logger:
|
||
|
||
Logger Component
|
||
================
|
||
|
||
.. seo::
|
||
:description: Instructions for setting up the central logging component in ESPHome.
|
||
:image: file-document-box.svg
|
||
|
||
The logger component automatically logs all log messages through the
|
||
serial port and through MQTT topics (if there is an MQTT client in the
|
||
configuration). By default, all logs with a severity ``DEBUG`` or higher will be shown.
|
||
Increasing the log level severity (to e.g ``INFO`` or ``WARN``) can help with the performance of the application and memory size.
|
||
|
||
.. code-block:: yaml
|
||
|
||
# Example configuration entry
|
||
logger:
|
||
level: DEBUG
|
||
|
||
Configuration variables:
|
||
------------------------
|
||
|
||
- **baud_rate** (*Optional*, int): The baud rate to use for the serial
|
||
UART port. Defaults to ``115200``. Set to ``0`` to disable logging via UART.
|
||
- **level** (*Optional*, string): The global log level. Any log message
|
||
with a lower severity will not be shown. Defaults to ``DEBUG``.
|
||
- **logs** (*Optional*, mapping): Manually set the log level for a
|
||
specific component or tag. See :ref:`Manual Log Levels for more
|
||
information <logger-manual_tag_specific_levels>`.
|
||
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
||
|
||
Advanced settings:
|
||
|
||
- **tx_buffer_size** (*Optional*, int): The size of the buffer used
|
||
for log messages. Decrease this if you’re having memory problems.
|
||
Defaults to ``512``.
|
||
- **hardware_uart** (*Optional*, string): The Hardware UART to use for logging. The default varies depending on
|
||
the specific processor/chip and framework you are using. See the :ref:`table below <logger-default_hardware_interfaces>`.
|
||
- **esp8266_store_log_strings_in_flash** (*Optional*, boolean): If set to false, disables storing
|
||
log strings in the flash section of the device (uses more memory). Defaults to true.
|
||
- **on_message** (*Optional*, :ref:`Automation <automation>`): An action to be
|
||
performed when a message is to be logged. The variables ``int level``, ``const char* tag`` and
|
||
``const char* message`` are available for lambda processing.
|
||
- **deassert_rts_dtr** (*Optional*, boolean): Deasserts RTS/DTR when opening
|
||
log over UART. This is useful if RTS/DTR signals are directly connected to
|
||
the reset pin or strapping pins. Note: Deassert typically means high on TTL
|
||
level since RTS/DTR are usually low active signals. Defaults to ``false``.
|
||
|
||
.. _logger-hardware_uarts:
|
||
|
||
Hardware UARTs
|
||
--------------
|
||
|
||
The logger component makes use of platform-specific hardware UARTs for serial logging. For example, the ESP32
|
||
has three hardware UARTs, all of which can be used for both transmit and receive. The ESP8266 only has two
|
||
hardware UARTs, one of which is transmit-only. The ESP8266's ``UART0`` can also be "swapped" to TX/RX on the
|
||
CTS/RTS pins in the event that you need to use GPIO1 and GPIO3 for something else.
|
||
|
||
Note that many common boards have their USB-to-serial adapters fixed to the default GPIOs used by ``UART0``,
|
||
so if you use any other configuration you will not get log messages over the on-board USB.
|
||
|
||
Default UART GPIO Pins
|
||
**********************
|
||
|
||
.. list-table::
|
||
:header-rows: 1
|
||
|
||
* -
|
||
- ``UART0``
|
||
- ``UART0_SWAP``
|
||
- ``UART1``
|
||
- ``UART2``
|
||
- ``USB_CDC``
|
||
- ``USB_SERIAL_JTAG``
|
||
* - ESP8266
|
||
- TX: 1, RX: 3
|
||
- TX: 15, RX: 13
|
||
- TX: 2, RX: N/A
|
||
- N/A
|
||
- N/A
|
||
- N/A
|
||
* - ESP32
|
||
- TX: 1, RX: 3
|
||
- N/A
|
||
- TX: 10, RX: 9
|
||
- TX: 17, RX: 16
|
||
- N/A
|
||
- N/A
|
||
* - ESP32-C3
|
||
- TX: 21, RX: 20
|
||
- N/A
|
||
- Undefined
|
||
- N/A
|
||
- N/A
|
||
- 18/19
|
||
* - ESP32-S2
|
||
- TX: 43, RX: 44
|
||
- N/A
|
||
- TX: 17, RX: 18
|
||
- N/A
|
||
- 19/20
|
||
- N/A
|
||
* - ESP32-S3
|
||
- TX: 43, RX: 44
|
||
- N/A
|
||
- TX: 17, RX: 18
|
||
- Undefined
|
||
- 19/20
|
||
- 19/20
|
||
|
||
*Undefined* means that the logger component cannot use this harware UART at this time.
|
||
|
||
.. _logger-default_hardware_interfaces:
|
||
|
||
Default Hardware Interfaces
|
||
---------------------------
|
||
|
||
Because of the wide variety of boards and processors/chips available, we've selected varying default
|
||
hardware interfaces for logging. Many newer boards based on ESP32 variants (such as the C3, S2 and S3)
|
||
are using the ESP's on-board USB hardware peripheral while boards based on older processors (such as
|
||
the original ESP32 or ESP8266) continue to use USB-to-serial bridge ICs for communication.
|
||
|
||
.. list-table::
|
||
:header-rows: 1
|
||
|
||
* -
|
||
- Arduino
|
||
- ESP-IDF
|
||
* - ESP8266
|
||
- ``UART0``
|
||
- N/A
|
||
* - ESP32
|
||
- ``UART0``
|
||
- ``UART0``
|
||
* - ESP32-C3
|
||
- ``USB_CDC``
|
||
- ``USB_SERIAL_JTAG``
|
||
* - ESP32-S2
|
||
- ``USB_CDC``
|
||
- ``USB_CDC``
|
||
* - ESP32-S3
|
||
- ``USB_CDC``
|
||
- ``USB_SERIAL_JTAG``
|
||
* - RP2040
|
||
- ``USB_CDC``
|
||
- N/A
|
||
|
||
.. _logger-log_levels:
|
||
|
||
Log Levels
|
||
----------
|
||
|
||
Possible log levels are (sorted by severity):
|
||
|
||
- ``NONE``
|
||
|
||
- No messages are logged.
|
||
|
||
- ``ERROR``
|
||
|
||
- With this log level, only errors are logged. Errors are issues that prevent the ESP from working
|
||
correctly. Color: red
|
||
|
||
- ``WARN``
|
||
|
||
- With this log level, warnings and errors are logged. Warnings are issues like invalid readings from
|
||
sensors that ESPHome can recover from. Color: yellow
|
||
|
||
- ``INFO``
|
||
|
||
- With this log level, everything up to info messages are logged; so errors, warnings and info. Color: green
|
||
|
||
- ``DEBUG`` (**Default**)
|
||
|
||
- Everything up to this log level is logged. Debug messages include the current readings from a sensor
|
||
and status messages. Color: cyan
|
||
|
||
- ``VERBOSE``
|
||
|
||
- Like debug, but a few more messages that are usually deemed to be spam are also included. Color: grey
|
||
|
||
- ``VERY_VERBOSE``
|
||
|
||
- All internal messages are logged. Including all the data flowing through data buses like
|
||
I²C, SPI or UART. Warning: May cause the device to slow down and have trouble staying
|
||
connecting due to amount of generated messages. Color: white
|
||
|
||
.. _logger-manual_tag_specific_levels:
|
||
|
||
Manual Tag-Specific Log Levels
|
||
------------------------------
|
||
|
||
If some component is spamming the logs and you want to manually set the
|
||
log level for it, first identify the tag of the log messages in question
|
||
and then disable them in your configuration.
|
||
|
||
Suppose we want to have verbose log messages globally, but the MQTT
|
||
client spams too much. In the following example, we’d first see that the
|
||
tag of the MQTT client is ``mqtt.client`` (before the first colon) and
|
||
the tag for MQTT components is ``mqtt.component``.
|
||
|
||
.. figure:: images/logger-manual_log_level.png
|
||
|
||
Next, we can manually set the log levels in the configuration like this:
|
||
|
||
.. code-block:: yaml
|
||
|
||
logger:
|
||
level: VERBOSE
|
||
logs:
|
||
mqtt.component: DEBUG
|
||
mqtt.client: ERROR
|
||
|
||
Please note that the global log level determines what log messages are
|
||
saved in the binary. So for example an ``INFO`` global log message will
|
||
purge all ``DEBUG`` log statements from the binary in order to conserve
|
||
space. This however means that you cannot set tag-specific log levels
|
||
that have a lower severity than the global log level.
|
||
|
||
.. _logger-log_action:
|
||
|
||
``logger.log`` Action
|
||
---------------------
|
||
|
||
Print a formatted message to the logs.
|
||
|
||
In the ``format`` option, you can use ``printf``-style formatting (see :ref:`display-printf`).
|
||
|
||
.. code-block:: yaml
|
||
|
||
on_...:
|
||
then:
|
||
- logger.log: "Hello World"
|
||
|
||
# Formatted:
|
||
- logger.log:
|
||
format: "The temperature sensor reports value %.1f and humidity %.1f"
|
||
args: [ 'id(temperature_sensor).state', 'id(humidity_sensor).state' ]
|
||
|
||
Configuration options:
|
||
|
||
- **format** (**Required**, string): The format for the message in :ref:`printf-style <display-printf>`.
|
||
- **args** (*Optional*, list of :ref:`lambda <config-lambda>`): The optional arguments for the
|
||
format message.
|
||
- **level** (*Optional*, string): The :ref:`log level <logger-log_levels>` to print the message
|
||
with. Defaults to ``DEBUG``.
|
||
- **tag** (*Optional*, string): The tag (seen in front of the message in the logs) to print the message
|
||
with. Defaults to ``main``.
|
||
|
||
Logger Automation
|
||
-----------------
|
||
|
||
.. _logger-on_message:
|
||
|
||
``on_message``
|
||
**************
|
||
|
||
This automation will be triggered when a new message is added to the log.
|
||
In :ref:`lambdas <config-lambda>` you can get the message, log level and tag from the trigger
|
||
using ``message`` (``const char *``), ``level`` (``int``) and ``tag`` (``const char *``).
|
||
|
||
.. code-block:: yaml
|
||
|
||
logger:
|
||
# ...
|
||
on_message:
|
||
level: ERROR
|
||
then:
|
||
- mqtt.publish:
|
||
topic: some/topic
|
||
payload: !lambda |-
|
||
return "Triggered on_message with level " + to_string(level) + ", tag " + tag + " and message " + message;
|
||
|
||
.. note::
|
||
|
||
Logging will not work in the ``on_message`` trigger. You can't use the :ref:`logger.log <logger-log_action>` action
|
||
and the ``ESP_LOGx`` logging macros in this automation.
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :doc:`/components/uart`
|
||
- :apiref:`logger/logger.h`
|
||
- :ghedit:`Edit`
|