mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-05 09:20:08 +01:00
149 lines
4.3 KiB
ReStructuredText
149 lines
4.3 KiB
ReStructuredText
Configuration Types
|
||
===================
|
||
|
||
esphomeyaml’s configuration files have several configuration types. This
|
||
page describes them.
|
||
|
||
.. _config-id:
|
||
|
||
ID
|
||
--
|
||
|
||
Quite an important aspect of esphomeyaml are “ids”. They are used to
|
||
connect components from different domains. For example, you define an
|
||
output component together with an id and then later specify that same id
|
||
in the light component. IDs should always be unique within a
|
||
configuration and esphomeyaml will warn you if you try to use the same
|
||
ID twice.
|
||
|
||
Because esphomeyaml converts your configuration into C++ code and the
|
||
ids are in reality just C++ variable names, they must also adhere to
|
||
C++’s naming conventions. `C++ Variable
|
||
names <http://venus.cs.qc.cuny.edu/~krishna/cs111/lectures/D3_C++_Variables.pdf>`__
|
||
…
|
||
|
||
- … must start with a letter and can end with numbers.
|
||
- … must not have a space in the name.
|
||
- … can not have special characters except the underscore (“_“).
|
||
- … must not be a keyword.
|
||
|
||
.. _config-pin:
|
||
|
||
Pin
|
||
---
|
||
|
||
esphomeyaml always uses the **chip-internal GPIO numbers**. These
|
||
internal numbers are always integers like ``16`` and can be prefixed by
|
||
``GPIO``. For example to use the pin with the **internal** GPIO number 16,
|
||
you could type ``GPIO16`` or just ``16``.
|
||
|
||
Most boards however have aliases for certain pins. For example the NodeMCU
|
||
ESP8266 uses pin names ``D0`` through ``D8`` as aliases for the internal GPIO
|
||
pin numbers. Each board (defined in :doc:`esphomeyaml section </esphomeyaml/components/esphomeyaml>`)
|
||
has their own aliases and so not all of them are supported yet. For example,
|
||
for the ``D0`` (as printed on the PCB silkscreen) pin on the NodeMCU ESP8266
|
||
has the internal GPIO name ``GPIO16``, but also has an alias ``D0``. So using
|
||
either one of these names in your configuration will lead to the same result.
|
||
|
||
.. code:: yaml
|
||
|
||
some_config_option:
|
||
pin: GPIO16
|
||
|
||
some_config_option:
|
||
# alias on the NodeMCU ESP8266:
|
||
pin: D0
|
||
|
||
.. _config-pin_schema:
|
||
|
||
Pin Schema
|
||
----------
|
||
|
||
In some places, esphomeyaml also supports a more advanced “pin schema”.
|
||
|
||
.. code:: yaml
|
||
|
||
some_config_option:
|
||
# Basic:
|
||
pin: D0
|
||
|
||
# Advanced:
|
||
pin:
|
||
number: D0
|
||
inverted: True
|
||
mode: INPUT_PULLUP
|
||
|
||
Configuration variables:
|
||
|
||
- **number** (**Required**, pin): The pin number.
|
||
- **inverted** (*Optional*, boolean): If all read and written values
|
||
should be treated as inverted. Defaults to ``False``.
|
||
- **mode** (*Optional*, string): A pin mode to set for the pin at
|
||
startup, corresponds to Arduino’s ``pinMode`` call.
|
||
|
||
Available Pin Modes:
|
||
|
||
- ``INPUT``
|
||
- ``OUTPUT``
|
||
- ``OUTPUT_OPEN_DRAIN``
|
||
- ``ANALOG`` (only on ESP32)
|
||
- ``INPUT_PULLUP``
|
||
- ``INPUT_PULLDOWN`` (only on ESP32)
|
||
- ``INPUT_PULLDOWN_16`` (only on ESP8266 and only on GPIO16)
|
||
|
||
More exotic Pin Modes are also supported, but rarely used:
|
||
|
||
- ``WAKEUP_PULLUP`` (only on ESP8266)
|
||
- ``WAKEUP_PULLDOWN`` (only on ESP8266)
|
||
- ``SPECIAL``
|
||
- ``FUNCTION_0`` (only on ESP8266)
|
||
- ``FUNCTION_1``
|
||
- ``FUNCTION_2``
|
||
- ``FUNCTION_3``
|
||
- ``FUNCTION_4``
|
||
- ``FUNCTION_5`` (only on ESP32)
|
||
- ``FUNCTION_6`` (only on ESP32)
|
||
|
||
.. _config-time:
|
||
|
||
Time
|
||
----
|
||
|
||
In lots of places in esphomeyaml you need to define time periods.
|
||
There are several ways of doing this. See below examples to see how you can specify time periods:
|
||
|
||
.. code:: yaml
|
||
|
||
some_config_option:
|
||
some_time_option: 1000us # 1000 microseconds = 1ms
|
||
some_time_option: 1000ms # 1000 milliseconds
|
||
some_time_option: 1.5s # 1.5 seconds
|
||
some_time_option: 0.5min # half a minute
|
||
some_time_option: 2h # 2 hours
|
||
|
||
# Make sure you wrap these in quotes
|
||
some_time_option: '2:01' # 2 hours 1 minute
|
||
some_time_option: '2:01:30' # 2 hours 1 minute 30 seconds
|
||
|
||
# 10ms + 30s + 25min + 3h
|
||
some_time_option:
|
||
milliseconds: 10
|
||
seconds: 30
|
||
minutes: 25
|
||
hours: 3
|
||
days: 0
|
||
|
||
# for all 'update_interval' options, also
|
||
update_interval: never # never update
|
||
update_interval: 0ms # update in every loop() iteration
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :doc:`esphomeyaml index </esphomeyaml/index>`
|
||
- :doc:`getting_started_command_line`
|
||
- :doc:`faq`
|
||
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/guides/configuration-types.rst>`__
|
||
|
||
.. disqus::
|