mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-15 10:45:41 +01:00
101005f1f1
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> Co-authored-by: Samuel Sieb <samuel@sieb.net>
53 lines
1.7 KiB
ReStructuredText
53 lines
1.7 KiB
ReStructuredText
.. _one_wire:
|
|
|
|
1-Wire Bus
|
|
==========
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a Dallas (Analog Devices) 1-Wire bus to communicate with 1-wire devices in ESPHome
|
|
:image: one-wire.svg
|
|
:keywords: Dallas, onewire, 1-wire
|
|
|
|
The ``one_wire`` component allows you to use supported 1-Wire devices in ESPHome.
|
|
The 1-Wire bus the devices are connected to should have an external pullup resistor of
|
|
about 4.7KΩ. For this, connect a resistor of *about* 4.7KΩ between ``3.3V``
|
|
and the data pin. Values ± 1KΩ will, in most cases, work fine as well,
|
|
if you don't have massively long wires.
|
|
|
|
GPIO
|
|
----
|
|
|
|
The ``gpio`` platform uses the CPU to generate the bus signals on a GPIO pin.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
one_wire:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **pin** (**Required**, number): The pin the sensor bus is connected to. Please note that 1-wire is a bi-directional bus so it requires both input and output from the pin.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. Required if you have multiple busses.
|
|
|
|
|
|
Getting Sensor IDs
|
|
******************
|
|
|
|
In order to find the addresses, simply start the firmware on your
|
|
device with a configured one_wire hub and observe the log output.
|
|
Note that you don't need to define the individual sensors just yet, as
|
|
the scanning will happen even with no sensors configured.
|
|
For example, you will see something like this:
|
|
|
|
.. figure:: images/dallas-log.png
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :apiref:`one_wire/one_wire_bus.h`
|
|
- :ghedit:`Edit`
|
|
- `Guidelines for Reliable Long Line 1-Wire Networks <https://www.analog.com/en/technical-articles/guidelines-for-reliable-long-line-1wire-networks.html>`__
|