Upstream/esphome-docs
1
0
Fork 0
mirror of https://github.com/esphome/esphome-docs.git synced 2024-11-08 09:52:07 +01:00
Code Issues Projects Releases Wiki Activity
27c940ccd8
esphome-docs/components/climate/index.rst
Jesse Hills 8fbb53e016
Add note for names to use friendly_name (#2774)
2023-03-27 15:35:26 +13:00

259 lines
9.9 KiB
ReStructuredText
Raw Blame History

Climate Component
=================
.. seo::
:description: Information about the base representation of all climate devices.
:image: folder-open.svg
ESPHome has support for climate devices. Climate devices can represent different types of
hardware, but the defining factor is that climate devices have a settable target temperature
and can be put in different modes like ``HEAT``, ``COOL``, ``HEAT_COOL`` or ``OFF``.
.. figure:: images/climate-ui.png
:align: center
:width: 60.0%
Climate Device UI in Home Assistant.
.. _config-climate:
Base Climate Configuration
--------------------------
All climate platforms in ESPHome inherit from the climate configuration schema. In ESPHome, ``°C`` is assumed for all temperature values. Some platforms allow conversion or setting in ``°F``, this is specified separately.
.. code-block:: yaml
climate:
- platform: ...
visual:
min_temperature: 18
max_temperature: 25
temperature_step: 0.1
Configuration variables:
- **name** (**Required**, string): The name of the climate device.
.. note::
If you have a :ref:`friendly_name <esphome-configuration_variables>` set for your device and
you want the climate to use that name, you can set ``name: None``.
- **icon** (*Optional*, icon): Manually set the icon to use for the climate device in the frontend.
- **visual** (*Optional*): Visual settings for the climate device - these do not
affect operation and are solely for controlling how the climate device shows up in the
frontend.
- **min_temperature** (*Optional*, float): The minimum temperature the climate device can reach.
Used to set the range of the frontend gauge.
- **max_temperature** (*Optional*, float): The maximum temperature the climate device can reach.
Used to set the range of the frontend gauge.
- **temperature_step** (*Optional*, float): The granularity with which the target temperature
can be controlled. Can be a single number, or split as below:
- **target_temperature** (**Required**, float)
- **current_temperature** (**Required**, float)
Advanced options:
- **internal** (*Optional*, boolean): Mark this component as internal. Internal components will
not be exposed to the frontend (like Home Assistant). Only specifying an ``id`` without
a ``name`` will implicitly set this to true.
- **disabled_by_default** (*Optional*, boolean): If true, then this entity should not be added to any client's frontend,
(usually Home Assistant) without the user manually enabling it (via the Home Assistant UI).
Requires Home Assistant 2021.9 or newer. Defaults to ``false``.
- **entity_category** (*Optional*, string): The category of the entity.
See https://developers.home-assistant.io/docs/core/entity/#generic-properties
for a list of available options. Requires Home Assistant 2021.11 or newer.
Set to ``""`` to remove the default entity category.
MQTT options:
- **action_state_topic** (*Optional*, string): The topic to publish
climate device action changes to.
- **current_temperature_state_topic** (*Optional*, string): The topic to publish
current temperature changes to.
- **fan_mode_state_topic** (*Optional*, string): The topic to publish
fan mode changes to.
- **fan_mode_command_topic** (*Optional*, string): The topic to receive
fan mode commands on.
- **mode_state_topic** (*Optional*, string): The topic to publish
climate device mode changes to.
- **mode_command_topic** (*Optional*, string): The topic to receive
climate device mode commands on.
- **preset_state_topic** (*Optional*, string): The topic to publish
preset changes to.
- **preset_command_topic** (*Optional*, string): The topic to receive
preset commands on.
- **swing_mode_state_topic** (*Optional*, string): The topic to publish
swing mode changes to.
- **swing_mode_command_topic** (*Optional*, string): The topic to receive
swing mode commands on.
- **target_temperature_state_topic** (*Optional*, string): The topic to publish
target temperature changes to.
- **target_temperature_command_topic** (*Optional*, string): The topic to receive
target temperature commands on.
- **target_temperature_high_state_topic** (*Optional*, string): The topic to publish
higher target temperature changes to.
- **target_temperature_high_command_topic** (*Optional*, string): The topic to receive
higher target temperature commands on.
- **target_temperature_low_state_topic** (*Optional*, string): The topic to publish
lower target temperature changes to.
- **target_temperature_low_command_topic** (*Optional*, string): The topic to receive
lower target temperature commands on.
- All other options from :ref:`MQTT Component <config-mqtt-component>`.
.. code-block:: yaml
climate:
- platform: ...
visual:
min_temperature: 18
max_temperature: 25
temperature_step:
target_temperature: 0.5
current_temperature: 0.1
Climate Automation
------------------
.. _climate-control_action:
``climate.control`` Action
**************************
This is an :ref:`Action <config-action>` for setting parameters for climate devices.
.. code-block:: yaml
- climate.control:
id: my_climate
mode: HEAT_COOL
target_temperature: 25°C
Configuration variables:
- **id** (**Required**, :ref:`config-id`): The ID of the climate device to control.
- **mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Put the climate device
in a specific mode. One of
- ``OFF`` - The device is manually set to off, the device is inactive.
- ``AUTO`` - The device is should adjust the temperature dynamically. For example based on a schedule, or learned behavior.
- ``HEAT`` - The device is set to heat to reach a target temperature.
- ``COOL`` - The device is set to cool to reach a target temperature.
- ``HEAT_COOL`` - The device should heat/cool to maintain a target temperature.
- ``FAN_ONLY`` - The device only has the fan enabled, no heating or cooling is taking place.
- ``DRY`` - The device is set to dry/humidity mode.
- **target_temperature** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
target temperature of a climate device.
- **target_temperature_low** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
lower target temperature of a climate device with a two-point target temperature.
- **target_temperature_high** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
higher target temperature of a climate device with a two-point target temperature.
- **preset** (*Optional*, string, :ref:`templatable <config-templatable>`): Set the preset
of the climate device. One of ``ECO``, ``AWAY``, ``BOOST``, ``COMFORT``, ``HOME``, ``SLEEP``,
``ACTIVITY``.
- **custom_preset** (*Optional*, string, :ref:`templatable <config-templatable>`): Set one of the
supported custom_presets of the climate device.
- **fan_mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Set the fan mode
of the climate device. One of ``ON``, ``OFF``, ``AUTO``, ``LOW``, ``MEDIUM``, ``HIGH``, ``MIDDLE``,
``FOCUS``, ``DIFFUSE``, ``QUIET``.
- **custom_fan_mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Set one of the
supported custom_fan_modes of the climate device.
- **swing_mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Set the swing mode
of the climate device. One of ``OFF``, ``BOTH``, ``VERTICAL``, ``HORIZONTAL``.
.. _climate-lambda_calls:
lambda calls
************
From :ref:`lambdas <config-lambda>`, you can call several methods on all binary sensors to do some
advanced stuff.
- Attributes: All climate devices have read-only attributes to get the current state of the device.
.. code-block:: cpp
// Current mode, type: ClimateMode (enum)
id(my_climate).mode
// Current temperature, type: float (degrees)
id(my_climate).current_temperature
// Target temperature, type: float (degrees)
id(my_climate).target_temperature
// Lower Target temperature, type: float (degrees)
id(my_climate).target_temperature_low
// High Target temperature, type: float (degrees)
id(my_climate).target_temperature_high
// Fan mode, type: FanMode (enum)
id(my_climate).fan_mode
// Custom Fan mode, type: string
id(my_climate).custom_fan_mode
// Swing mode, type: SwingMode (enum)
id(my_climate).swing_mode
// Current action (currentl on idle, cooling, heating, etc.), ClimateAction (enum)
id(my_climate).action
// Preset, type: Preset (enum)
id(my_climate).preset
// Custom Preset, type: string
id(my_climate).custom_preset
- ``.make_call``: Control the climate device
.. code-block:: cpp
auto call = id(my_climate).make_call();
call.set_mode("OFF");
// etc. see API reference
call.perform();
.. _climate-on_state_trigger:
``climate.on_state`` Trigger
****************************
This trigger is activated each time the state of the climate device is updated
(for example, if the current temperature measurement or the mode set by the users changes).
.. code-block:: yaml
climate:
- platform: midea # or any other platform
# ...
on_state:
- logger.log: "State updated!"
.. _climate-on_control_trigger:
``climate.on_control`` Trigger
******************************
This trigger is activated each time a *control* input of the climate device
is updated via a ``ClimateCall`` (which includes changes coming in from Home
Assistant). That is, this trigger is activated for, for example, changes to
the mode, *but not* on temperature measurements. It will be invoked prior to
the ``on_state`` trigger, if both are defined.
.. code-block:: yaml
climate:
- platform: midea # or any other platform
# ...
on_control:
- logger.log: "Control input received; configuration updated!"
See Also
--------
- :apiref:`climate/climate.h`
- :ghedit:`Edit`
.. toctree::
:maxdepth: 1
:glob:
*
Reference in New Issue View Git Blame Copy Permalink