mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-25 17:17:54 +01:00
559 lines
16 KiB
ReStructuredText
559 lines
16 KiB
ReStructuredText
.. _actions-triggers:
|
|
|
|
Actions, Triggers, Conditions
|
|
=============================
|
|
|
|
.. seo::
|
|
:description: Guide for building automations in ESPHome
|
|
:image: auto-fix.svg
|
|
|
|
ESPHome *actions* are how we make an ESPHome device *do something.*
|
|
|
|
Let's begin with an example. Suppose you have a configuration file which contains:
|
|
|
|
.. code-block:: yaml
|
|
|
|
switch:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
name: "Living Room Dehumidifier"
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
name: "Living Room Dehumidifier Toggle Button"
|
|
|
|
With this file you can already perform some basic tasks. You can control the ON/OFF state of the dehumidifier in your
|
|
living room from Home Assistant's front-end. But in many cases, controlling everything strictly from the frontend is
|
|
not desirable. That's why you've also installed a simple push button next to the dehumidifier wired to pin GPIOXX.
|
|
A simple push of this button should toggle the state of the dehumidifier.
|
|
|
|
You *could* write an automation to do this task in Home Assistant's automation engine, but IoT devices should not
|
|
depend on network connections to perform their jobs -- especially not for something as simple as switching on/off a
|
|
dehumidifier.
|
|
|
|
With ESPHome's automation engine, you can define automations using a syntax that is (hopefully) about as easy to use
|
|
as Home Assistant's. For example, this configuration would achieve your desired behavior for the dehumidifier:
|
|
|
|
.. code-block:: yaml
|
|
|
|
switch:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
name: "Living Room Dehumidifier"
|
|
id: dehumidifier1
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin: GPIOXX
|
|
name: "Living Room Dehumidifier Toggle Button"
|
|
on_press:
|
|
then:
|
|
- switch.toggle: dehumidifier1
|
|
|
|
Let's step through what's happening here:
|
|
|
|
.. code-block:: yaml
|
|
|
|
switch:
|
|
- platform: gpio
|
|
# ...
|
|
id: dehumidifier1
|
|
|
|
First, we have to give the dehumidifier ``switch`` an :ref:`config-id` so that we can refer to it inside of our
|
|
automation.
|
|
|
|
.. _actions-trigger:
|
|
|
|
Triggers
|
|
--------
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_press:
|
|
|
|
We now attach a special attribute ``on_press`` to the binary sensor (which represents the button). This part is called
|
|
a "trigger". In this example, the *automation* which follows on the next few lines will execute whenever someone
|
|
*begins* to press the button. Note the terminology follows what you would call these events on mouse buttons. A *press*
|
|
happens when you begin pressing the button. There are also other triggers like ``on_release``, ``on_click`` or
|
|
``on_double_click`` available.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# ...
|
|
on_press:
|
|
then:
|
|
- switch.toggle: dehumidifier1
|
|
|
|
.. _actions-action:
|
|
|
|
Actions
|
|
-------
|
|
|
|
Now comes the actual automation block. With ``then``, you tell ESPHome what should happen when the press happens.
|
|
Within this block, you can define several "actions" that will be executed sequentially. For example, ``switch.toggle``
|
|
and the line after that form an action. Each action is separated by a dash and multiple actions can be executed in
|
|
sequence simply by adding another ``-`` like so:
|
|
|
|
.. code-block:: yaml
|
|
|
|
# ...
|
|
on_press:
|
|
then:
|
|
- switch.toggle: dehumidifier1
|
|
- delay: 2s
|
|
- switch.toggle: dehumidifier1
|
|
|
|
With this automation, a press of the push button would cause the dehumidifier to turn on/off for 2 seconds, and then
|
|
cycle back to its original state. You can also have a single trigger with multiple automations:
|
|
|
|
.. code-block:: yaml
|
|
|
|
# ...
|
|
on_press:
|
|
- then:
|
|
- switch.toggle: dehumidifier1
|
|
- then:
|
|
- light.toggle: dehumidifier_indicator_light
|
|
|
|
# Same as:
|
|
on_press:
|
|
then:
|
|
- switch.toggle: dehumidifier1
|
|
- light.toggle: dehumidifier_indicator_light
|
|
|
|
|
|
As a final example, let's make our dehumidifier "smart". Let's make it turn on automatically when
|
|
the humidity reported by a sensor is above 65% and make it turn off again when it falls below 50%:
|
|
|
|
.. code-block:: yaml
|
|
|
|
sensor:
|
|
- platform: dht
|
|
humidity:
|
|
name: "Living Room Humidity"
|
|
on_value_range:
|
|
- above: 65.0
|
|
then:
|
|
- switch.turn_on: dehumidifier1
|
|
- below: 50.0
|
|
then:
|
|
- switch.turn_off: dehumidifier1
|
|
temperature:
|
|
name: "Living Room Temperature"
|
|
|
|
That's a lot of indentation. 😉
|
|
|
|
``on_value_range`` is a special trigger for sensors that triggers when the value of the sensor is within/above/below
|
|
the specified range. In the first example, this range is defined as "any value above or including 65.0" and the second
|
|
range refers to any (humidity) value 50% or below.
|
|
|
|
Finally, for the cases where the "pure" YAML automations just don't quite reach far enough, ESPHome has another
|
|
extremely powerful tool to offer: :doc:`templates`.
|
|
|
|
Now that concludes the introduction to actions in ESPHome. They're a powerful tool to automate almost everything on
|
|
your device with an easy-to-use syntax. What follows below is an index of common actions which you're sure to find
|
|
useful (and even essential) for building all sorts of automations.
|
|
|
|
.. _common-actions:
|
|
|
|
Common Actions
|
|
--------------
|
|
|
|
.. _delay_action:
|
|
|
|
``delay`` Action
|
|
****************
|
|
|
|
This action delays the execution of the next action in the action list by a specified
|
|
time period.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- switch.turn_on: relay_1
|
|
- delay: 2s
|
|
- switch.turn_off: relay_1
|
|
# Templated, waits for 1s (1000ms) only if a reed switch is active
|
|
- delay: !lambda "if (id(reed_switch).state) return 1000; else return 0;"
|
|
|
|
.. note::
|
|
|
|
This is a "smart" asynchronous delay - other code will still run in the background while
|
|
the delay is happening. When using a lambda call, you should return the delay value in milliseconds.
|
|
|
|
.. _if_action:
|
|
|
|
``if`` Action
|
|
*************
|
|
|
|
This action first evaluated a certain condition (``if:``) and then either
|
|
executes the ``then:`` branch or the ``else:`` branch depending on the output of the condition.
|
|
|
|
After the chosen branch (``then`` or ``else``) is done with execution, the next action is performed.
|
|
|
|
For example below you can see an automation that checks if a sensor value is below 30 and if so
|
|
turns on a light for 5 seconds. Otherwise, the light is turned off immediately.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- if:
|
|
condition:
|
|
lambda: 'return id(some_sensor).state < 30;'
|
|
then:
|
|
- logger.log: "The sensor value is below 30!"
|
|
- light.turn_on: my_light
|
|
- delay: 5s
|
|
else:
|
|
- logger.log: "The sensor value is above 30!"
|
|
- light.turn_off: my_light
|
|
|
|
|
|
Configuration variables:
|
|
|
|
- **condition** (**Required**, :ref:`Condition <config-condition>`): The condition to check to determine which branch to take.
|
|
- **then** (*Optional*, :ref:`Action <config-action>`): The action to perform if the condition evaluates to true.
|
|
Defaults to doing nothing.
|
|
- **else** (*Optional*, :ref:`Action <config-action>`): The action to perform if the condition evaluates to false.
|
|
Defaults to doing nothing.
|
|
|
|
.. _lambda_action:
|
|
|
|
``lambda`` Action
|
|
*****************
|
|
|
|
This action executes an arbitrary piece of C++ code (see :ref:`Lambda <config-lambda>`).
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- lambda: |-
|
|
id(some_binary_sensor).publish_state(false);
|
|
|
|
.. _repeat_action:
|
|
|
|
``repeat`` Action
|
|
*****************
|
|
|
|
This action allows you to repeat a block a given number of times.
|
|
For example, the automation below will flash the light five times.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
- repeat:
|
|
count: 5
|
|
then:
|
|
- light.turn_on: some_light
|
|
- delay: 1s
|
|
- light.turn_off: some_light
|
|
- delay: 10s
|
|
|
|
Configuration variables:
|
|
|
|
- **count** (**Required**, int): The number of times the action should be repeated. The counter is available to lambdas using the reserved word "iteration".
|
|
- **then** (**Required**, :ref:`Action <config-action>`): The action to repeat.
|
|
|
|
.. _wait_until_action:
|
|
|
|
``wait_until`` Action
|
|
*********************
|
|
|
|
This action allows your automations to wait until a condition evaluates to true. (So this is just
|
|
a shorthand way of writing a ``while`` action with an empty ``then`` block.)
|
|
|
|
.. code-block:: yaml
|
|
|
|
# In a trigger:
|
|
on_...:
|
|
- logger.log: "Waiting for binary sensor"
|
|
- wait_until:
|
|
binary_sensor.is_on: some_binary_sensor
|
|
- logger.log: "Binary sensor is ready"
|
|
|
|
If you want to use a timeout, the term "condition" is required:
|
|
|
|
.. code-block:: yaml
|
|
|
|
# In a trigger:
|
|
on_...:
|
|
- logger.log: "Waiting for binary sensor"
|
|
- wait_until:
|
|
condition:
|
|
binary_sensor.is_on: some_binary_sensor
|
|
timeout: 8s
|
|
- logger.log: "Binary sensor might be ready"
|
|
|
|
|
|
Configuration variables:
|
|
|
|
- **condition** (**Required**, :ref:`Condition <config-condition>`): The condition to wait to become true.
|
|
- **timeout** (*Optional*, :ref:`config-time`): Time to wait before timing out. Defaults to never timing out.
|
|
|
|
.. _while_action:
|
|
|
|
``while`` Action
|
|
****************
|
|
|
|
This action is similar to the :ref:`if <if_action>` Action. The ``while`` action loops
|
|
through a block as long as the given condition is true.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# In a trigger:
|
|
on_...:
|
|
- while:
|
|
condition:
|
|
binary_sensor.is_on: some_binary_sensor
|
|
then:
|
|
- logger.log: "Still executing"
|
|
- light.toggle: some_light
|
|
- delay: 5s
|
|
|
|
Configuration variables:
|
|
|
|
- **condition** (**Required**, :ref:`Condition <config-condition>`): The condition to check to determine whether or not to execute.
|
|
- **then** (**Required**, :ref:`Action <config-action>`): The action to perform until the condition evaluates to false.
|
|
|
|
.. _component-update_action:
|
|
|
|
``component.update`` Action
|
|
***************************
|
|
|
|
Using this action you can manually call the ``update()`` method of a component.
|
|
|
|
Please note that this only works with some component types and others will result in a
|
|
compile error.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- component.update: my_component
|
|
|
|
# The same as:
|
|
- lambda: 'id(my_component).update();'
|
|
|
|
.. _component-suspend_action:
|
|
|
|
``component.suspend`` Action
|
|
****************************
|
|
|
|
Using this action you can manually call the ``stop_poller()`` method of a component.
|
|
|
|
After this action the component will stop being refreshed.
|
|
|
|
While the poller is suspendend, it's still possible to trigger on-demand updates by
|
|
using :ref:`component.update <component-update_action>`
|
|
|
|
Please note that this only works with PollingComponent types and others will result in a
|
|
compile error.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- component.suspend: my_component
|
|
|
|
# The same as:
|
|
- lambda: 'id(my_component).stop_poller();'
|
|
|
|
.. _component-resume_action:
|
|
|
|
``component.resume`` Action
|
|
***************************
|
|
|
|
Using this action you can manually call the ``start_poller()`` method of a component.
|
|
|
|
After this action the component will refresh at the original update_interval rate
|
|
|
|
This will allow the component to resume automatic update at the defined interval.
|
|
|
|
This action also allows to change the update interval, calling it without suspend,
|
|
replace the poller directly.
|
|
|
|
Please note that this only works with PollingComponent types and others will result in a
|
|
compile error.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- component.resume: my_component
|
|
|
|
# The same as:
|
|
- lambda: 'id(my_component).start_poller();'
|
|
|
|
# Change the poller interval
|
|
on_...:
|
|
then:
|
|
- component.resume:
|
|
id: my_component
|
|
update_interval: 15s
|
|
|
|
.. _common_conditions:
|
|
|
|
Common Conditions
|
|
-----------------
|
|
|
|
"Conditions" provide a way for your device to take an action only when a specific (set of) condition(s) is satisfied.
|
|
|
|
.. _and_condition:
|
|
.. _or_condition:
|
|
.. _xor_condition:
|
|
.. _not_condition:
|
|
|
|
``and`` / ``or`` / ``xor`` / ``not`` Condition
|
|
**********************************************
|
|
|
|
Check a combination of conditions
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- if:
|
|
condition:
|
|
# Same syntax for `and` as well as `xor` conditions
|
|
or:
|
|
- binary_sensor.is_on: some_binary_sensor
|
|
- binary_sensor.is_on: other_binary_sensor
|
|
# ...
|
|
|
|
- if:
|
|
condition:
|
|
not:
|
|
binary_sensor.is_off: some_binary_sensor
|
|
|
|
.. _for_condition:
|
|
|
|
``for`` Condition
|
|
*****************
|
|
|
|
Allows you to check if a given condition has been true for at least a given amount of time.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
if:
|
|
condition:
|
|
for:
|
|
time: 5min
|
|
condition:
|
|
api.connected:
|
|
then:
|
|
- logger.log: API has stayed connected for at least 5 minutes!
|
|
|
|
Configuration variables:
|
|
|
|
- **time** (**Required**, :ref:`templatable <config-templatable>`, :ref:`config-time`):
|
|
The time for which the condition has to have been true.
|
|
- **condition** (**Required**, :ref:`condition<config-condition>`): The condition to check.
|
|
|
|
.. _lambda_condition:
|
|
|
|
``lambda`` Condition
|
|
********************
|
|
|
|
This condition performs an arbitrary piece of C++ code (see :ref:`Lambda <config-lambda>`)
|
|
and can be used to create conditional flow in actions.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_...:
|
|
then:
|
|
- if:
|
|
condition:
|
|
# Should return either true or false
|
|
lambda: |-
|
|
return id(some_sensor).state < 30;
|
|
# ...
|
|
|
|
.. _config-action:
|
|
|
|
All Actions
|
|
-----------
|
|
|
|
*See the respective component's page(s) for more detail.*
|
|
|
|
See also: :ref:`common-actions`.
|
|
|
|
.. include:: all_actions.rst
|
|
|
|
.. _config-condition:
|
|
|
|
All Conditions
|
|
--------------
|
|
|
|
*See the respective component's page(s) for more detail.*
|
|
|
|
See also: :ref:`common_conditions`.
|
|
|
|
.. include:: all_conditions.rst
|
|
|
|
.. _tips-and-tricks:
|
|
|
|
Tips and Tricks
|
|
---------------
|
|
|
|
.. _automation-networkless:
|
|
|
|
Do Automations Work Without a Network Connection
|
|
************************************************
|
|
|
|
This is a common question and the answer is **YES!** All automations you define in ESPHome are executed on the
|
|
microcontroller itself and will continue to work even if the Wi-Fi network is down or the MQTT server is not reachable.
|
|
|
|
There is one caveat though: ESPHome will automatically reboot periodically if no connection is made to its API. This
|
|
helps in the event that there is an issue in the device's network stack preventing it from being reachable on the
|
|
network. You can adjust this behavior (or even disable automatic rebooting) using the ``reboot_timeout`` option in any
|
|
of the following components:
|
|
|
|
- :doc:`/components/wifi`
|
|
- :doc:`/components/api`
|
|
- :doc:`/components/mqtt`
|
|
|
|
Beware, however, that disabling the reboot timeout(s) effectively disables the reboot watchdog, so you will need to
|
|
power-cycle the device if it proves to be/remain unreachable on the network.
|
|
|
|
.. _timers-timeouts:
|
|
|
|
Timers and Timeouts
|
|
*******************
|
|
|
|
While ESPHome does not provide a construction for timers, you can easily implement them by
|
|
combining ``script`` and ``delay``. You can have an absolute timeout or sliding timeout by
|
|
using script modes ``single`` and ``restart`` respectively.
|
|
|
|
.. code-block:: yaml
|
|
|
|
script:
|
|
- id: hallway_light_script
|
|
mode: restart # Light will be kept on during 1 minute since
|
|
# the latest time the script is executed
|
|
then:
|
|
- light.turn_on: hallway_light
|
|
- delay: 1 min
|
|
- light.turn_off: hallway_light
|
|
|
|
...
|
|
on_...: # can be called from different wall switches
|
|
- script.execute: hallway_light_script
|
|
|
|
Sometimes you'll also need a timer which does not perform any action; in this case, you can use a single ``delay``
|
|
action and then (in your automation) use the ``script.is_running`` condition to know if your "timer" is active or not.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`templates`
|
|
- :ghedit:`Edit`
|