mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-15 10:45:41 +01:00
79 lines
3.1 KiB
ReStructuredText
79 lines
3.1 KiB
ReStructuredText
Endstop Cover
|
|
=============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up time-based covers in ESPHome.
|
|
:image: electric-switch.png
|
|
|
|
The ``endstop`` cover platform allows you to create covers with position control that have
|
|
endstops at both ends of the cover to detect the fully-open and fully-closed states.
|
|
When any of these endstops are reached, the cover is stopped (via ``stop_action``)
|
|
and the corresponding state is sent out.
|
|
|
|
This cover platform is mainly intended for DIY cover setups: Two endstops at either end and a motor
|
|
controlling the cover. The user just needs to enter what to do when the platform wants to move the
|
|
cover in either direction, or stop it, as well as information about open and close information so that
|
|
the current position can be approximated.
|
|
|
|
Additionally, open and close durations can be specified to allow ESPHome to approximate the
|
|
current position of the cover.
|
|
|
|
.. figure:: images/more-info-ui.png
|
|
:align: center
|
|
:width: 75.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
cover:
|
|
- platform: endstop
|
|
name: "Endstop Cover"
|
|
|
|
open_action:
|
|
- switch.turn_on: open_cover_switch
|
|
open_duration: 2.1min
|
|
open_endstop: open_endstop_binary_sensor
|
|
|
|
close_action:
|
|
- switch.turn_on: close_cover_switch
|
|
close_duration: 2min
|
|
close_endstop: close_endstop_binary_sensor
|
|
|
|
stop_action:
|
|
- switch.turn_off: open_cover_switch
|
|
- switch.turn_off: close_cover_switch
|
|
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name of the cover.
|
|
- **open_action** (**Required**, :ref:`Action <config-action>`): The action that should
|
|
be performed when the remote requests the cover to be opened.
|
|
- **open_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
|
|
to open up from the fully-closed state.
|
|
- **open_endstop** (**Required**, :ref:`config-id`): The ID of the
|
|
:ref:`Binary Sensor <config-binary_sensor>` that turns on when the open position is reached.
|
|
|
|
- **close_action** (*Optional*, :ref:`Action <config-action>`): The action that should
|
|
be performed when the remote requests the cover to be closed.
|
|
- **close_duration** (**Required**, :ref:`config-time`): The amount of time it takes the cover
|
|
to close from the fully-open state.
|
|
- **close_endstop** (**Required**, :ref:`config-id`): The ID of the
|
|
:ref:`Binary Sensor <config-binary_sensor>` that turns on when the closed position is reached.
|
|
|
|
- **stop_action** (**Required**, :ref:`Action <config-action>`): The action that should
|
|
be performed when the remote requests the cover to be closed or an endstop is reached.
|
|
- **max_duration** (*Optional*, :ref:`config-time`): The maximum duration the cover should be opening
|
|
or closing. Useful for protecting from dysfunctional endstops.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Cover <config-cover>`.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :ref:`automation`
|
|
- :apiref:`endstop/endstop_cover.h`
|
|
- :ghedit:`Edit`
|