mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-26 17:27:47 +01:00
270 lines
9.9 KiB
ReStructuredText
270 lines
9.9 KiB
ReStructuredText
Nextion TFT LCD Display
|
|
=======================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up Nextion TFT LCD displays
|
|
:image: nextion.jpg
|
|
|
|
The ``nextion`` display platform allows you to use Nextion LCD displays (`datasheet <https://nextion.itead.cc/resources/datasheets/>`__,
|
|
`iTead <https://www.itead.cc/display/nextion.html>`__)
|
|
with ESPHome.
|
|
|
|
.. figure:: images/nextion-full.jpg
|
|
:align: center
|
|
:width: 75.0%
|
|
|
|
Nextion LCD Display.
|
|
|
|
As the communication with the Nextion LCD display is done using UART, you need to have an :ref:`UART bus <uart>`
|
|
in your configuration with ``rx_pin`` both the ``tx_pin`` set to the respective pins on the display.
|
|
The Nextion uses a baud rate of 9600 by default. It may be configured to use a faster speed by adding (for
|
|
example)
|
|
|
|
.. code-block:: c++
|
|
|
|
baud=115200 // Sets the baud rate to 115200
|
|
bkcmd=0 // Tells the Nextion to not send responses on commands. This is the current default but can be set just in case
|
|
|
|
|
|
|
|
to the ``program.s`` source file (in the Nextion Editor) before the ``page`` line.
|
|
This permits faster communication with the Nextion display and it is highly recommended when using :ref:`uart-hardware_uarts`. Without a hardware uart make sure to set the baud rate to 9600.
|
|
|
|
|
|
The below example configures a UART for the Nextion display to use
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
uart:
|
|
id: uart_2
|
|
rx_pin: GPIO16
|
|
tx_pin: GPIO17
|
|
baud_rate: 115200
|
|
|
|
|
|
display:
|
|
- platform: nextion
|
|
id: nextion1
|
|
uart_id: uart_2
|
|
lambda: |-
|
|
it.set_component_value("gauge", 50);
|
|
it.set_component_text("textview", "Hello World!");
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **uart_id** (*Optional*, :ref:`config-id`): The ID of the :ref:`UART bus <uart>` you wish to use for this display.
|
|
Use this if you want to use multiple UART buses at once.
|
|
- **brightness** (*Optional*, percentage): Set display brightness in %. Defaults to ``100%``
|
|
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the nextion display.
|
|
See :ref:`display-nextion_lambda` for more information. This is typically empty. The individual components for the Nextion will handle almost all features needed for updating
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to call the lambda to update the display.
|
|
Defaults to ``5s``.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **tft_url** (*Optional*, string): The URL to download the TFT file from for updates. See :ref:`Nextion Upload <nextion_upload_tft>`.
|
|
- **on_sleep** (*Optional*, :ref:`Action <config-action>`): An automation to perform when the Nextion goes to sleep.
|
|
- **on_wake** (*Optional*, :ref:`Action <config-action>`): An automation to perform when the Nextion wakes up.
|
|
- **touch_sleep_timeout** (*Optional*, int): Sets internal No-touch-then-sleep timer in seconds.
|
|
- **wake_up_page** (*Optional*, int): Sets the page to display after waking up
|
|
- **auto_wake_on_touch** (*Optional*, boolean): Sets if Nextion should auto-wake from sleep when touch press occurs.
|
|
|
|
|
|
.. _display-nextion_lambda:
|
|
|
|
Rendering Lambda
|
|
----------------
|
|
|
|
With Nextion displays, a dedicated chip on the display itself does the whole rendering. ESPHome can only
|
|
send *instructions* to the display to tell it *how* to render something and *what* to render.
|
|
|
|
First, you need to use the `Nextion Editor <https://nextion.tech/nextion-editor/>`__ to
|
|
create a display file and insert it using the SD card slot. Then, in the rendering ``lambda``, you can use the various API calls
|
|
to populate data on the display:
|
|
|
|
.. code-block:: yaml
|
|
|
|
display:
|
|
- platform: nextion
|
|
# ...
|
|
lambda: |-
|
|
// set the "value" of a component - value is always an integer
|
|
// for example gauges represent their status using integers from 0 to 100
|
|
it.set_component_value("gauge", 50);
|
|
|
|
// set the text of a component
|
|
it.set_component_text("textview", "Hello World!");
|
|
|
|
// set the text of a component with formatting
|
|
it.set_component_text_printf("textview", "The uptime is: %.1f", id(uptime_sensor).state);
|
|
|
|
.. note::
|
|
|
|
Although you can use the rendering lambda most, if not all, updates to the Nextion can be handled by the individual Nextion components. **See Below**
|
|
|
|
Please see :ref:`display-printf` for a quick introduction into the ``printf`` formatting rules and
|
|
:ref:`display-strftime` for an introduction into the ``strftime`` time formatting.
|
|
|
|
Lambda Calls
|
|
************
|
|
|
|
Several methods are available for use within :ref:`lambdas <config-lambda>` ; these permit advanced functionality beyond simple
|
|
display updates. See the full :apiref:`nextion/nextion.h` for more info.
|
|
|
|
.. _nextion_upload_tft:
|
|
|
|
- ``upload_tft``: Start the upload process. See :ref:`nextion_upload_tft_file`
|
|
|
|
The developer tools in Home Assistant can be used to trigger the update. The below code block is an example on how to set this up.
|
|
.. code-block:: yaml
|
|
|
|
api:
|
|
services:
|
|
- service: update_nextion
|
|
then:
|
|
- lambda: 'id(nextion1)->upload_tft();'
|
|
|
|
.. _nextion_update_all_components:
|
|
|
|
- ``update_all_components()``: All the components will publish their states.
|
|
|
|
.. code-block:: c++
|
|
|
|
id(nextion1).update_all_components();
|
|
|
|
.. _update_components_by_prefix:
|
|
|
|
- ``update_components_by_prefix(std::string page)``: This will send the current state of any **component_name** matching the prefix. Some settings like background color need to be resent on page change. This is a good hook for that.
|
|
|
|
.. code-block:: c++
|
|
|
|
id(nextion1).update_components_by_prefix("page0.");
|
|
|
|
.. _set_nextion_sensor_state:
|
|
|
|
- ``set_nextion_sensor_state(NextionQueueType queue_type, std::string name, float state);`` : Sets the sensor state. See :ref:`Queue Types <nextion_queue_types>`
|
|
- ``set_nextion_sensor_state(int queue_type, std::string name, float state);`` : Sets the sensor state. See :ref:`Queue Types <nextion_queue_types>`
|
|
|
|
- ``set_nextion_text_state(std::string name, std::string state);`` : Sets the text sensor state
|
|
|
|
.. note::
|
|
|
|
Below is a method for HASS to send updates to the Nextion by code.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
services:
|
|
- service: set_nextion_sensor
|
|
variables:
|
|
nextion_type: int
|
|
name: string
|
|
state: float
|
|
then:
|
|
- lambda: |-
|
|
id(nextion1).set_nextion_sensor_state(nextion_type,name,state);
|
|
- service: set_nextion_text
|
|
variables:
|
|
name: string
|
|
state: string
|
|
then:
|
|
- lambda: |-
|
|
id(nextion1).set_nextion_text_state(name,state);
|
|
|
|
.. _nextion_queue_types:
|
|
|
|
Queue Types:
|
|
- SENSOR 0
|
|
- BINARY_SENSOR 1
|
|
- SWITCH 2
|
|
- TEXT_SENSOR 3
|
|
- WAVEFORM_SENSOR 4
|
|
- NO_RESULT 5
|
|
|
|
.. _nextion_upload_tft_file:
|
|
|
|
Uploading A TFT File
|
|
--------------------
|
|
This will download the file from the tft_url and will transfer it over the UART to the Nextion.
|
|
Once completed both the ESP and Nextion will reboot. During the upload process esphome will be
|
|
unresponsive and no logging will take place. This uses the same protocol as the Nextion editor and
|
|
only updates the changes of the TFT file. If HTTPS/SSL is enabled it will be about 1kB/sec.
|
|
|
|
.. warning::
|
|
|
|
If :ref:`uart-hardware_uarts` are not available then inconsistent results WILL occur. Lowering the speed to 9600 baud may help.
|
|
|
|
|
|
To host the TFT file you can use Home Assistant itself or any other web server. HTTPS, while always recommended on any network, will greatly reduce the upload speed.
|
|
|
|
Home Assistant
|
|
**************
|
|
To host the TFT file from Home Assistant, create a www directory if it doesn't exist in your config
|
|
directory. You can create a subdirectory for those files as well.
|
|
|
|
For example if the file is located
|
|
under your configuration directory ``www/tft/default.tft`` the URL to access it will be
|
|
``http(s)://your_home_assistant_url:port/local/tft/default.tft``
|
|
|
|
NGINX
|
|
*****
|
|
|
|
`NGINX <https://www.nginx.com/>`__
|
|
|
|
The below NGINX example configuration will serve files out of the /var/www/nextion directory.
|
|
|
|
.. code-block:: nginx
|
|
|
|
server {
|
|
listen 80;
|
|
access_log /var/log/nginx/nextion_access.log;
|
|
error_log /var/log/nginx/nextion_error.log;
|
|
root /var/www/nextion;
|
|
}
|
|
|
|
|
|
|
|
Components
|
|
----------
|
|
This library supports a few different components allowing communication back and forth from HA <-> MCU <-> Nextion.
|
|
|
|
.. note::
|
|
|
|
If the Nextion is sleeping or if the component was set to be hidden, it will not update its components even if updates are sent.
|
|
After the Nextion wakes up, all components will send their states to the Nextion to get around this.
|
|
|
|
With the exception of the :doc:`../binary_sensor/nextion` that has the ``page_id``/``component_id`` options configured, the example below illustrates:
|
|
- Polling the Nextion for updates
|
|
- Dynamic updates sent from the Nextion to the ESP device
|
|
|
|
.. code-block:: yaml
|
|
|
|
sensor:
|
|
- platform: nextion
|
|
nextion_id: nextion1
|
|
name: "n0"
|
|
component_name: n0
|
|
- platform: nextion
|
|
id: current_page
|
|
name: "current_page"
|
|
variable_name: dp
|
|
update_interval: 1s
|
|
|
|
|
|
Note that the first one requires a custom protocol to be included in the Nextion display's code/configuration. See the individual components for more detail.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`../binary_sensor/nextion`
|
|
- :doc:`../sensor/nextion`
|
|
- :doc:`../switch/nextion`
|
|
- :doc:`../text_sensor/nextion`
|
|
- :doc:`../uart`
|
|
- :apiref:`nextion/nextion.h`
|
|
- `Simple Nextion Library <https://github.com/bborncr/nextion>`__ by `Bentley Born <https://github.com/bborncr>`__
|
|
- `Official Nextion Library <https://github.com/itead/ITEADLIB_Arduino_Nextion>`__ by `iTead <https://www.itead.cc/>`__
|
|
- :ghedit:`Edit`
|