mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-27 17:37:45 +01:00
78 lines
2.3 KiB
ReStructuredText
78 lines
2.3 KiB
ReStructuredText
Tcl112 Remote Climate
|
|
=====================
|
|
|
|
.. seo::
|
|
:description: Controls a Tcl112 compatible Climate via IR
|
|
:image: air-conditioner.png
|
|
|
|
The ``tcl112`` climate platform allows you to control a TCL112 compatible AC unit by sending IR signals
|
|
as your remote unit would do.
|
|
|
|
This component requires that you have setup a :doc:`/components/remote_transmitter`.
|
|
|
|
Due to the unidirectional nature of IR remote controllers, this component cannot determine the
|
|
actual state of the device, and will assume the state of the device is the latest state requested.
|
|
|
|
.. figure:: images/climate-ui.png
|
|
:align: center
|
|
:width: 60.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_transmitter:
|
|
pin: GPIO32
|
|
carrier_duty_percent: 50%
|
|
|
|
climate:
|
|
- platform: tcl112
|
|
name: "Living Room AC"
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name for the climate.
|
|
- **supports_cool** (*Optional*, boolean): Enables setting cool mode for this climate device. Defaults to ``True``.
|
|
- **supports_heat** (*Optional*, boolean): Enables setting heat mode for this climate device. Defaults to ``True``.
|
|
- **sensor** (*Optional*, :ref:`config-id`): The sensor that is used to measure the ambient
|
|
temperature. This is only for reporting the current temperature in the frontend.
|
|
- **receiver_id** (*Optional*, :ref:`config-id`): The remote_receiver id, see: :ref:`tcl112-receiver_id`.
|
|
- All other options from :ref:`Climate <config-climate>`.
|
|
|
|
Advanced options:
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- **transmitter_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the remote transmitter.
|
|
|
|
.. _tcl112-receiver_id:
|
|
|
|
Using a receiver
|
|
----------------
|
|
|
|
When using a receiver it is recommended to put the IR receiver as close as possible to the equipment's
|
|
IR receiver.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
id: rcvr
|
|
pin:
|
|
number: GPIO14
|
|
inverted: True
|
|
mode: INPUT_PULLUP
|
|
tolerance: 45 # high tolerance required for some remote control units
|
|
|
|
climate:
|
|
- platform: tcl112
|
|
name: "Living Room AC"
|
|
receiver_id: rcvr
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/climate/index`
|
|
- :doc:`/components/remote_transmitter`
|
|
- :apiref:`tcl112/tcl112.h`
|
|
- :ghedit:`Edit`
|