esphome-docs/components/binary_sensor/ble_presence.rst
2019-11-05 21:42:56 +01:00

67 lines
2.3 KiB
ReStructuredText

ESP32 Bluetooth Low Energy Device
=================================
.. seo::
:description: Instructions for setting up BLE binary sensors for the ESP32.
:image: bluetooth.png
The ``ble_presence`` binary sensor platform lets you track the presence of a
bluetooth low energy device.
.. figure:: images/esp32_ble-ui.png
:align: center
:width: 80.0%
.. code-block:: yaml
# Example configuration entry
esp32_ble_tracker:
binary_sensor:
- platform: ble_presence
mac_address: AC:37:43:77:5F:4C
name: "ESP32 BLE Tracker Google Home Mini"
Configuration variables:
------------------------
- **mac_address** (**Required**, MAC Address): The MAC address to track for this
binary sensor.
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify
the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
.. _esp32_ble_tracker-setting_up_devices:
Setting Up Devices
------------------
To set up binary sensors for specific BLE beacons you first have to know which MAC address
to track. Most devices show this screen in some setting menu. If you don't know the MAC address,
however, you can use the ``esp32_ble_tracker`` hub without any binary sensors attached and read through
the logs to see discovered Bluetooth Low Energy devices.
.. code-block:: yaml
# Example configuration entry for finding MAC addresses
esp32_ble_tracker:
Using the configuration above, first you should see a ``Starting scan...`` debug message at
boot-up. Then, when a BLE device is discovered, you should see messages like
``Found device AC:37:43:77:5F:4C`` together with some information about their
address type and advertised name. If you don't see these messages, your device is unfortunately
currently not supported.
Please note that devices that show a ``RANDOM`` address type in the logs cannot be used for
tracking, since their MAC-address periodically changes.
See Also
--------
- :doc:`/components/esp32_ble_tracker`
- :doc:`/components/binary_sensor/index`
- :apiref:`ble_presence/ble_presence.h`
- `ESP32 BLE for Arduino <https://github.com/nkolban/ESP32_BLE_Arduino>`__ by `Neil Kolban <https://github.com/nkolban>`__.
- :ghedit:`Edit`