mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-18 11:15:36 +01:00
48 lines
2.1 KiB
ReStructuredText
48 lines
2.1 KiB
ReStructuredText
Deep Sleep Component
|
|
====================
|
|
|
|
The ``deep_sleep`` component can be used to automatically enter a deep sleep mode on the
|
|
ESP8266/ESP32 after a certain amount of time. This is especially useful with nodes that operate
|
|
on batteries and therefore need to conserve as much energy as possible.
|
|
|
|
To use ``deep_sleep`` first specify how long the node should be active, i.e. how long it should
|
|
check sensor values and report them, using the ``run_duration`` and ``run_cycles`` options. If you
|
|
use both in your configuration, any time either one of them is finished, the node will go into deep
|
|
sleep mode.
|
|
|
|
Next, tell the node how it should wakeup. On the ESP8266, you can only put the node into deep sleep
|
|
for a duration using ``sleep_duration``, note that on the ESP8266 ``GPIO16`` must be connected to
|
|
the ``RST`` pin so that it will wake up again. On the ESP32, you additionally have the option
|
|
to wake up on any RTC pin (0, 2, 4, 12, 13, 14, 15, 25, 26, 27, 32, 39).
|
|
|
|
While in deep sleep mode, the node will not do any work and not respond to any network traffic,
|
|
even Over The Air updates.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
deep_sleep:
|
|
run_duration: 10s
|
|
sleep_duration: 10min
|
|
|
|
Configuration variables:
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- **run_duration** (*Optional*, :ref:`config-time`):
|
|
The time duration the node should be active, i.e. run code.
|
|
- **run_cycles** (*Optional*, int): The number of ``loop()`` cycles to go through before
|
|
entering deep sleep mode.
|
|
- **sleep_duration** (*Optional*, :ref:`config-time`): The time duration to stay in deep sleep mode.
|
|
- **wakeup_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`):
|
|
Only on ESP32. A pin to wake up to once in deep sleep mode. Use the inverted property to wake up
|
|
to LOW signals.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
|
|
See Also
|
|
^^^^^^^^
|
|
|
|
- :doc:`switch/shutdown`
|
|
- :ref:`automation`
|
|
- :doc:`API Reference </api/core/deep-sleep>`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/deep_sleep.rst>`__
|