mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-05 09:20:08 +01:00
64 lines
1.6 KiB
ReStructuredText
64 lines
1.6 KiB
ReStructuredText
GPS Component
|
|
=============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up GPS integration in ESPHome.
|
|
:image: crosshair-gps.png
|
|
|
|
.. warning::
|
|
|
|
This component has not been fully tested yet, if you have this component
|
|
and can confirm it works, please create a quick new issue here
|
|
https://github.com/esphome/issues/
|
|
|
|
Thanks!
|
|
|
|
The ``gps`` component allows you to connect GPS modules to your ESPHome project.
|
|
Any GPS module that uses the standardized NMEA communication protocol will work.
|
|
|
|
.. figure:: images/gps-full.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
GPS Module. Image by `Adafruit`_
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/746
|
|
|
|
For this integration to work you need to have set up a :ref:`UART bus <uart>`
|
|
in your configuration - only the RX pin should be necessary.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
uart:
|
|
rx_pin: D0
|
|
baud_rate: 9600
|
|
|
|
# Declare GPS module
|
|
gps:
|
|
|
|
# GPS as time source
|
|
time:
|
|
- platform: gps
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
The component is split up in platforms.
|
|
|
|
First you need to define a global GPS module hub (as seen above).
|
|
|
|
Currently, the only data that can be extracted from GPS is the current time.
|
|
GPS can be used as a time platform to get the current date and time via the
|
|
very accurate GPS clocks that are also independent of any network connection.
|
|
|
|
See :doc:`time` for config options for the GPS time source.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- `TinyGPS++ library <http://arduiniana.org/libraries/tinygpsplus/>`__
|
|
- :apiref:`gps/gps.h`
|
|
- :ghedit:`Edit`
|