esphome-docs/components/pca9554.rst
2023-03-25 12:43:12 +01:00

94 lines
3.0 KiB
ReStructuredText

PCA9554 I/O Expander
====================
.. seo::
:description: Instructions for setting up PCA9554, PCA9554A, PCA9536 digital port expanders in ESPHome.
:image: ../images/pca9554a.jpg
The PCA9554 component allows you to use **PCA9554**, **PCA9554A** or **PCA9536** I/O expanders in ESPHome.
It uses :ref:`I²C Bus <i2c>` for communication.
.. figure:: ../images/pca9554a.jpg
:align: center
PCA9554A I/O Expander chip
Once configured, you can use any of the **8** pins (PCA9554, PCA9554A) or **4** pins (PCA9536) as
pins for your projects. Within ESPHome they emulate a real internal GPIO pin
and can therefore be used with many of ESPHome's components such as the GPIO
binary sensor or GPIO switch.
.. note::
The 7 bit I²C device address ranges are:
- PCA9554: ``0x20`` to ``0x27``
- PCA9554A: ``0x38`` to ``0x3F``
- PCA9536: ``0x41``
For the PCA9554 and PCA9554A, the actual choice of the I²C device address depends on state of the 3 address pins.
Please refer to the individual datasheets linked at the bottom of the page for further details to set the address.
Up to eight PCA9554 and an additional eight PCA9554A devices can reside on the same I²C bus.
Please note that only one PCA9536 device is allowed per I²C bus due to its fixed address.
The PCA9554 and PCA9554A provide 8 bits of GPIO's (pin numbers 0-7).
The PCA9536 provides 4 bits of GPIO's (pin numbers 0-3).
Any option accepting a :ref:`Pin Schema <config-pin_schema>` can theoretically be used, but some more
complicated components that do communication through this I/O expander will not work.
.. code-block:: yaml
# Example configuration entry
pca9554:
- id: 'pca9554a_device'
address: 0x38
# Individual outputs
switch:
- platform: gpio
name: "PCF9554A Pin #0"
pin:
pca9554: pcf9554a_device
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode:
output: true
inverted: false
Configuration variables:
************************
- **id** (**Required**, :ref:`config-id`): The id to use for this ``pca9554`` component.
- **address** (*Optional*, int): The I²C address of the driver.
Defaults to ``0x20``.
Pin configuration variables:
****************************
- **pca9554** (**Required**, :ref:`config-id`): The id of the ``pca9554`` component of the pin.
- **number** (**Required**, int): The pin number.
- **inverted** (*Optional*, boolean): If all read and written values
should be treated as inverted. Defaults to ``false``.
- **mode** (*Optional*, string): A pin mode to set for the pin at. One of ``INPUT`` or ``OUTPUT``.
See Also
--------
- :ref:`i2c`
- :doc:`switch/gpio`
- :doc:`binary_sensor/gpio`
- `PCA9554 datasheet <https://www.ti.com/lit/ds/symlink/pca9554.pdf>`__
- `PCA9554A datasheet <https://www.ti.com/lit/ds/symlink/pca9554a.pdf>`__
- `PCA9536 datasheet <https://www.ti.com/lit/ds/symlink/pca9536.pdf>`__
- :apiref:`pca9554/pca9554.h`
- :ghedit:`Edit`