mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-28 17:48:35 +01:00
278 lines
8.2 KiB
ReStructuredText
278 lines
8.2 KiB
ReStructuredText
Inkplate 6
|
||
==========
|
||
|
||
.. seo::
|
||
:description: Instructions for setting up Inkplate E-Paper displays in ESPHome.
|
||
:image: inkplate6.jpg
|
||
|
||
All-in-one e-paper display ``Inkplate 6``
|
||
Inkplate 6 is a powerful, Wi-Fi enabled ESP32 based six-inch e-paper display – recycled from a Kindle e-reader. Its main feature is simplicity.
|
||
Learn more at `Inkplate's website <https://inkplate.io/>`__
|
||
|
||
.. figure:: images/inkplate6.jpg
|
||
:align: center
|
||
:width: 75.0%
|
||
|
||
Inkplate 6
|
||
|
||
|
||
.. code-block:: yaml
|
||
|
||
# Example minimal configuration entry
|
||
|
||
mcp23017:
|
||
- id: mcp23017_hub
|
||
address: 0x20
|
||
|
||
display:
|
||
- platform: inkplate6
|
||
id: inkplate_display
|
||
greyscale: false
|
||
partial_updating: false
|
||
update_interval: 60s
|
||
|
||
ckv_pin: 32
|
||
sph_pin: 33
|
||
gmod_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 1
|
||
gpio0_enable_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 8
|
||
oe_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 0
|
||
spv_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 2
|
||
powerup_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 4
|
||
wakeup_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 3
|
||
vcom_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 5
|
||
|
||
.. warning::
|
||
|
||
When using the Inkplate epaper module, the GPIO pin numbers above *cannot be changed* as they are
|
||
hardwired within the module/PCB.
|
||
|
||
.. warning::
|
||
|
||
Inkplate module cannot perform partial update if 3 bit mode is on.
|
||
It just ignores the function call in that case.
|
||
|
||
|
||
Configuration variables:
|
||
************************
|
||
|
||
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
||
- **greyscale** (*Optional*, boolean): Makes the screen display 3 bit colors. Defaults to ``false``
|
||
- **partial_updating** (*Optional*, boolean): Makes the screen update partially, which is faster, but leaves burnin. Defaults to ``false``
|
||
- **full_update_every** (*Optional*, int): When partial updating is enabled, forces a full screen update after chosen number of updates. Defaults to ``10``
|
||
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
|
||
See :ref:`display-engine` for more information.
|
||
- **update_interval** (*Optional*, :ref:`config-time`): The interval to re-draw the screen. Defaults to ``5s``.
|
||
- **pages** (*Optional*, list): Show pages instead of a single lambda. See :ref:`display-pages`.
|
||
|
||
- **ckv_pin** (**Required**, :ref:`config-pin`): The CKV pin for the Inkplate display.
|
||
- **gmod_pin** (**Required**, :ref:`config-pin`): The GMOD pin for the Inkplate display.
|
||
- **gpio0_enable_pin** (**Required**, :ref:`config-pin`): The GPIO0 Enable pin for the Inkplate display.
|
||
- **oe_pin** (**Required**, :ref:`config-pin`): The OE pin for the Inkplate display.
|
||
- **powerup_pin** (**Required**, :ref:`config-pin`): The Powerup pin for the Inkplate display.
|
||
- **sph_pin** (**Required**, :ref:`config-pin`): The SPH pin for the Inkplate display.
|
||
- **spv_pin** (**Required**, :ref:`config-pin`): The SPV pin for the Inkplate display.
|
||
- **vcom_pin** (**Required**, :ref:`config-pin`): The VCOM pin for the Inkplate display.
|
||
- **cl_pin** (*Optional*, :ref:`config-pin`): The CL pin for the Inkplate display.
|
||
Defaults to GPIO0.
|
||
- **le_pin** (*Optional*, :ref:`config-pin`): The LE pin for the Inkplate display.
|
||
Defaults to GPIO2.
|
||
|
||
- **display_data_0_pin** (*Optional*, :ref:`config-pin`): The Data 0 pin for the Inkplate display.
|
||
Defaults to GPIO4.
|
||
- **display_data_1_pin** (*Optional*, :ref:`config-pin`): The Data 1 pin for the Inkplate display.
|
||
Defaults to GPIO5.
|
||
- **display_data_2_pin** (*Optional*, :ref:`config-pin`): The Data 2 pin for the Inkplate display.
|
||
Defaults to GPIO18.
|
||
- **display_data_3_pin** (*Optional*, :ref:`config-pin`): The Data 3 pin for the Inkplate display.
|
||
Defaults to GPIO19.
|
||
- **display_data_4_pin** (*Optional*, :ref:`config-pin`): The Data 4 pin for the Inkplate display.
|
||
Defaults to GPIO23.
|
||
- **display_data_5_pin** (*Optional*, :ref:`config-pin`): The Data 5 pin for the Inkplate display.
|
||
Defaults to GPIO25.
|
||
- **display_data_6_pin** (*Optional*, :ref:`config-pin`): The Data 6 pin for the Inkplate display.
|
||
Defaults to GPIO26.
|
||
- **display_data_7_pin** (*Optional*, :ref:`config-pin`): The Data 7 pin for the Inkplate display.
|
||
Defaults to GPIO27.
|
||
|
||
|
||
Complete example
|
||
****************
|
||
|
||
The following is a complete example YAML configuration that does a few things beyond the usual
|
||
Wi-Fi, API, and OTA configuration.
|
||
|
||
.. code-block:: yaml
|
||
|
||
# Example configuration entry
|
||
esphome:
|
||
name: inkplate
|
||
platform: ESP32
|
||
board: esp-wrover-kit
|
||
|
||
logger:
|
||
|
||
wifi:
|
||
ssid: <YOUR WIFI SSID>
|
||
password: <YOUR WIFI PASSWORD>
|
||
ap:
|
||
ssid: Inkplate-AP
|
||
password: '12345678'
|
||
|
||
captive_portal:
|
||
|
||
ota:
|
||
|
||
api:
|
||
|
||
switch:
|
||
- platform: restart
|
||
name: "Inkplate Reboot"
|
||
id: reboot
|
||
|
||
- platform: gpio
|
||
id: battery_read_mosfet
|
||
pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 9
|
||
inverted: true
|
||
|
||
- platform: template
|
||
name: "Inkplate Greyscale mode"
|
||
lambda: return id(inkplate_display).get_greyscale();
|
||
turn_on_action:
|
||
- lambda: id(inkplate_display).set_greyscale(true);
|
||
turn_off_action:
|
||
- lambda: id(inkplate_display).set_greyscale(false);
|
||
|
||
- platform: template
|
||
name: "Inkplate Partial Updating"
|
||
lambda: return id(inkplate_display).get_partial_updating();
|
||
turn_on_action:
|
||
- lambda: id(inkplate_display).set_partial_updating(true);
|
||
turn_off_action:
|
||
- lambda: id(inkplate_display).set_partial_updating(false);
|
||
|
||
sensor:
|
||
- platform: adc
|
||
id: battery_voltage
|
||
update_interval: never
|
||
attenuation: 11db
|
||
pin: 35
|
||
- platform: template
|
||
name: "Inkplate Battery Voltage"
|
||
lambda: |-
|
||
id(battery_read_mosfet).turn_on();
|
||
delay(1);
|
||
float adc = id(battery_voltage).sample();
|
||
id(battery_read_mosfet).turn_off();
|
||
return adc;
|
||
filters:
|
||
- multiply: 2
|
||
|
||
i2c:
|
||
|
||
mcp23017:
|
||
- id: mcp23017_hub
|
||
address: 0x20
|
||
|
||
binary_sensor:
|
||
- platform: status
|
||
name: "Inkplate Status"
|
||
id: system_status
|
||
|
||
- platform: gpio
|
||
name: "Inkplate Touch Pad 1"
|
||
pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 10
|
||
- platform: gpio
|
||
name: "Inkplate Touch Pad 2"
|
||
pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 11
|
||
- platform: gpio
|
||
name: "Inkplate Touch Pad 3"
|
||
pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 12
|
||
|
||
time:
|
||
- platform: sntp
|
||
id: esptime
|
||
|
||
font:
|
||
- file: "Helvetica.ttf"
|
||
id: helvetica_96
|
||
size: 96
|
||
- file: "Helvetica.ttf"
|
||
id: helvetica_48
|
||
size: 48
|
||
|
||
|
||
display:
|
||
- platform: inkplate6
|
||
id: inkplate_display
|
||
greyscale: false
|
||
partial_updating: false
|
||
update_interval: 60s
|
||
|
||
ckv_pin: 32
|
||
sph_pin: 33
|
||
gmod_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 1
|
||
gpio0_enable_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 8
|
||
oe_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 0
|
||
spv_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 2
|
||
powerup_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 4
|
||
wakeup_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 3
|
||
vcom_pin:
|
||
mcp23xxx: mcp23017_hub
|
||
number: 5
|
||
|
||
lambda: |-
|
||
it.fill(COLOR_ON);
|
||
|
||
it.print(100, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_LEFT, "ESPHome");
|
||
|
||
it.strftime(400, 300, id(helvetica_48), COLOR_OFF, TextAlign::CENTER, "%Y-%m-%d", id(esptime).now());
|
||
it.strftime(400, 400, id(helvetica_96), COLOR_OFF, TextAlign::CENTER, "%H:%M", id(esptime).now());
|
||
|
||
if (id(system_status).state) {
|
||
it.print(700, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_RIGHT, "Online");
|
||
} else {
|
||
it.print(700, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_RIGHT, "Offline");
|
||
}
|
||
|
||
|
||
See Also
|
||
--------
|
||
|
||
- :doc:`index`
|
||
- `Arduino Inkplate 6 library <https://github.com/e-radionicacom/Inkplate-6-Arduino-library>`__ by `E-radionica.com <https://e-radionica.com/>`__
|
||
- :ghedit:`Edit`
|