mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-30 18:09:26 +01:00
73 lines
2.9 KiB
ReStructuredText
73 lines
2.9 KiB
ReStructuredText
MS8607 Temperature+Pressure+Humidity Sensor
|
|
===========================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up MS8607 temperature, humidity, and pressure sensors.
|
|
:image: ms8607.jpg
|
|
:keywords: MS8607
|
|
|
|
The ``ms8607`` sensor platform allows you to use your MS8607 (`datasheet`_, `Adafruit`_) temperature,
|
|
pressure and humidity sensors with ESPHome. An :ref:`I²C Bus <i2c>` is required to be set up in
|
|
your configuration for this sensor to work.
|
|
|
|
.. figure:: images/ms8607-full.jpg
|
|
:align: center
|
|
|
|
MS8607 Temperature, Pressure & Humidity Sensor. Image by `Adafruit`_
|
|
|
|
.. _datasheet: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=MS8607-02BA01&DocType=DS&DocLang=English
|
|
.. _Adafruit: https://www.adafruit.com/product/4716
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: ms8607
|
|
temperature:
|
|
name: Temperature
|
|
humidity:
|
|
name: Humidity
|
|
pressure:
|
|
name: Pressure
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **temperature** (**Required**): The information for the temperature sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **pressure** (**Required**): The information for the pressure sensor.
|
|
All options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **humidity** (**Required**): The information for the humidity sensor.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the humidity sensor. Defaults to ``0x40``.
|
|
- **i2c_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`I²C Component <i2c>` if your
|
|
configuration uses multiple I²C buses. This should match the ``i2c_id`` documented below.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of
|
|
the temperature & pressure sensor. Defaults to ``0x76``.
|
|
- **i2c_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`I²C Component <i2c>` if your
|
|
configuration uses multiple I²C buses. This should match the ``i2c_id`` inside of ``humidity``, documented above.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
|
|
sensor. Defaults to ``60s``.
|
|
|
|
|
|
I²C Addresses
|
|
-------------
|
|
The MS8607 digital sensor has two I²C addresses: one for temperature & pressure (``0x76``), and the other for
|
|
humidity readings (``0x40``). They are attached to the same ``SCL``/``SDA`` pins on the package, so if you need to
|
|
customize the ``i2c_id``, you need to specify it at the top-level for temperature & humidity, and use the same value
|
|
inside the humidity configuration block.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :apiref:`ms8607/ms8607.h`
|
|
- `MS8607 Generic C Driver <https://github.com/TEConnectivity/MS8607_Generic_C_Driver>`__ by `TE Connectivity <http://www.te.com/>`__
|
|
- `Manufacturer's product page <https://www.te.com/usa-en/product-CAT-BLPS0018.html>`__
|
|
- :ghedit:`Edit`
|