esphome-docs/components/binary_sensor/analog_threshold.rst
2022-05-15 13:54:47 +02:00

60 lines
2.4 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Analog Threshold Binary Sensor
==============================
.. seo::
:description: Instructions for setting up an analog threshold binary sensors.
:image: analog_threshold.svg
The ``analog_threshold`` binary sensor platform allows you to convert analog values
(i.e. :doc:`sensor </components/sensor/index>` readings)
into boolean values, using a threshold as a reference.
When the signal is above or equal to the threshold the binary sensor is ``true``
(this behavior can be changed by adding an ``invert`` filter).
It provides an *hysteresis* option to reduce instability when the source signal is noisy
using different limits depending on the current state.
Additionally a :ref:`delay filter <binary_sensor-filters>` could be used to only change
after a new state has been kept a minimum time.
If the source sensor is uninitialized at the moment of component creation, the initial
state of the binary sensor wil be ``false``, if later it has some reading errors, those
invalid source updates will be ignored, and the binary sensor will keep it´s last state.
For example, below configuration would turn the readings of current sensor into
a binary sensor.
.. code-block:: yaml
# Example configuration entry
binary_sensor:
- platform: analog_threshold
name: "Garage Door Opening"
sensor_id: motor_current_sensor
threshold: 0.5
Configuration variables
-----------------------
- **name** (**Required**, string): The name of the binary sensor.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **sensor_id** (**Required**, :ref:`config-id`): The ID of the source sensor.
- **threshold** (**Required**, float or mapping): Configures the reference for comparison. Accepts either a shorthand
float number that will be used as both upper/lower threshold, or a mapping to define different values for each (to
use hysteresis).
- **upper** (**Required**, float): Upper threshold, that needs to be crossed to transition from ``low`` to ``high`` states.
- **lower** (**Required**, float): Lower threshold, that needs to be crossed to transition from ``high`` to ``low`` states.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
See Also
--------
- :doc:`/components/binary_sensor/index`
- :doc:`/components/sensor/index`
- :ref:`automation`
- :apiref:`analog_threshold/analog_threshold_binary_sensor.h`
- :ghedit:`Edit`