mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-26 17:27:47 +01:00
86 lines
2.9 KiB
ReStructuredText
86 lines
2.9 KiB
ReStructuredText
TT21100 Touch Screen Controller
|
|
===============================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up TT21100 touch screen controller with ESPHome
|
|
:image: esp32-s3-korvo-2-lcd.png
|
|
:keywords: TT21100, ESP32-S3-BOX, ESP32-S3-Korvo-2-LCD
|
|
|
|
The ``tt21100`` touchscreen platform allows using the touch screen controllers based on the TT21100 chip with ESPHome.
|
|
The :ref:`I²C <i2c>` is required to be set up in your configuration for this touchscreen to work.
|
|
|
|
This controller is used in the Espressif ESP32-S3-BOX and the ESP32-S3-Korvo-2-LCD extension board for the ESP32-S3-Korvo-2.
|
|
|
|
.. figure:: images/esp32-s3-box.png
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
TT21100 touchscreen on ESP32-S3-BOX
|
|
|
|
.. figure:: images/esp32-s3-korvo-2.png
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
TT21100 touchscreen on ESP32-S3-Korvo-2
|
|
|
|
Base Touchscreen Configuration
|
|
------------------------------
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
touchscreen:
|
|
platform: tt21100
|
|
id: my_touchscreen
|
|
interrupt_pin: GPIO3
|
|
reset_pin: GPIO48
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually set the ID of this touchscreen.
|
|
- **interrupt_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The touch detection pin.
|
|
- **reset_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The reset pin of the controller.
|
|
|
|
- All other options from :ref:`Touchscreen <config-touchscreen>`.
|
|
|
|
.. warning::
|
|
|
|
If the reset pin is shared between the display and TT21100 touchscreen
|
|
(as is the case for the ESP32-S3-BOX and the ESP32-S3-Korvo-2-LCD),
|
|
only configure the reset pin for the display and remove the **reset_pin** variable for the TT21100 touchscreen.
|
|
The display component should be initialized before the touchscreen component, which has then already performed the reset.
|
|
|
|
Binary Sensor
|
|
-------------
|
|
|
|
In addition to touch areas on the screen configured through the :ref:`Touchscreen <config-touchscreen>` component,
|
|
the TT21100 supports up to four buttons located outside of the normal touchscreen area.
|
|
On the ESP32-S3-BOX and the ESP32-S3-Korvo-2-LCD, the red circle below the display is such a button.
|
|
A binary sensor can be configured to react to touching these buttons.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
binary_sensor:
|
|
- platform: tt21100
|
|
name: "Home"
|
|
index: 0
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **tt21100_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the touchscreen.
|
|
- **index** (**Required**, int): Internal index of the touch button, between 0 and 3.
|
|
|
|
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`Binary Sensor Filters <binary_sensor-filters>`
|
|
- :apiref:`tt21100/touchscreen/tt21100.h`
|
|
- :apiref:`tt21100/binary_sensor/tt21100_button.h`
|
|
- :ghedit:`Edit`
|