mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-13 10:34:02 +01:00
b0b8fc5836
No need for external component warning, it's built-in. Fix for https://github.com/esphome/esphome-docs/pull/2306
310 lines
11 KiB
ReStructuredText
310 lines
11 KiB
ReStructuredText
Mirabella Genio Bulbs
|
|
=====================
|
|
|
|
The Mirabella Genio is a Tuya-based smart bulb sold by Kmart in Australia.
|
|
|
|
.. figure:: images/mirabella-genio-b22-rgbw.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Originally intended to be used with their companion app once flashed using `tuya-convert <https://github.com/ct-Open-Source/tuya-convert>`__ ESPHome generated
|
|
firmware can be uploaded allowing you to control the bulbs via Home Assistant.
|
|
|
|
.. note::
|
|
|
|
Please note that the new version of this bulb that comes in a cardboard box are using the TYLC5 module which does not work via tuya-convert.
|
|
These bulbs are also using the SM2135 chipset and not PWM anymore.
|
|
|
|
1. Create the ESPHome Firmware
|
|
------------------------------
|
|
|
|
#. Refer to either :doc:`/guides/getting_started_command_line` or :doc:`/guides/getting_started_hassio` before moving onto the next step.
|
|
#. Select a bulb configuration below based on the bulb/s you have and copy all of the text in the code block and paste into your
|
|
``name_of_esphome_configuration.yaml`` file.
|
|
#. Compile the firmware, again depending on your chosen setup refer to the guides in the first point.
|
|
|
|
2. Flashing
|
|
-----------
|
|
|
|
2.1 Prerequisites
|
|
*****************
|
|
|
|
#. Before you begin you'll need one of the following Linux machines running the latest copy of `Raspbian Stretch Lite
|
|
<https://www.raspberrypi.org/downloads/raspbian/>`__
|
|
|
|
a. Raspberry Pi 2B/B+ with `USB WiFi Dongle <https://www.raspberrypi.org/products/raspberry-pi-usb-wifi-dongle/>`__.
|
|
b. Raspberry Pi 3B/B+.
|
|
|
|
.. note::
|
|
|
|
As per the `tuya-convert documentation <https://github.com/ct-Open-Source/tuya-convert/blob/master/README.md#requirements>`__:
|
|
|
|
Any Linux with a Wifi adapter which can act as an Access Point should also work. Please note that we have tested the Raspberry Pi with clean installations
|
|
only. If you use your Raspberry Pi for anything else, we recommend using another SD card with a clean installation.
|
|
|
|
#. A microSD card (minimum 2GB, 8GB+ recommended).
|
|
#. Any WiFi device which can connect to the SSID generated by the Raspberry Pi and eventually the flashed Tuya device. **This cannot be an iOS / Apple device.
|
|
Android devices will work.**
|
|
|
|
2.2 Installing the OS
|
|
*********************
|
|
|
|
#. It's recommended to read the documentation provided by the Raspberry Pi Foundation on the best way to flash the OS to the microSD card depending on your
|
|
platform - `Installing operating system images <https://www.raspberrypi.org/documentation/installation/installing-images/>`__.
|
|
#. After you've flashed the microSD card browse to the "boot" partition and add a blank file called "ssh" **(without any extension)** which will enable the
|
|
SSH server upon first boot, extended information on this step can be found `here
|
|
<https://www.raspberrypi.org/documentation/remote-access/ssh/README.md#3-enable-ssh-on-a-headless-raspberry-pi-add-file-to-sd-card-on-another-machine>`__.
|
|
#. Plug the microSD card into the Raspberry Pi, connect network cable and power, the Raspberry Pi will start to boot.
|
|
|
|
2.3 Connecting to the Pi via SSH
|
|
********************************
|
|
|
|
#. Download and install `Putty <https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html>`__.
|
|
#. Open Putty.
|
|
#. Enter the IP of Raspberry Pi in the box that says "Host Name", leaving the port set to 22 (default for SSH). A list of recommended ways can be found `here
|
|
<https://www.raspberrypi.org/documentation/remote-access/ip-address.md>`__, but the easiest is to download and use `Fing <https://www.fing.com/>`__
|
|
(`Android <https://play.google.com/store/apps/details?id=com.overlook.android.fing&hl=en_GB>`__ / `iOS
|
|
<https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8>`__).
|
|
#. In the "Saved Sessions" input box, name the Raspberry Pi connection and then press "Save".
|
|
#. Select your new saved session from the list.
|
|
#. Press "Open".
|
|
|
|
2.4 Configuring the Pi
|
|
**********************
|
|
|
|
#. In the putty window login with the **pi** as the user and **raspberry** for the password.
|
|
#. Type ``sudo apt-get update && sudo apt-get dist-upgrade -y`` and wait for the upgrades to install.
|
|
#. Type ``sudo apt-get install git`` and wait for it to install.
|
|
|
|
2.5 Setup and Install tuya-convert
|
|
**********************************
|
|
|
|
#. In the putty window type ``git clone https://github.com/ct-Open-Source/tuya-convert`` press enter and wait while the repository is cloned.
|
|
#. Type ``cd tuya-convert`` and press enter.
|
|
#. Type ``./install_prereq.sh`` press enter and wait as the script gathers all the required components needed to function.
|
|
|
|
2.6 Upload ESPHome Firmware using SFTP
|
|
**************************************
|
|
|
|
#. Download `FileZilla <https://filezilla-project.org/download.php?type=client>`__ or `WinSCP <https://winscp.net/eng/index.php>`__ or use your preferred FTP
|
|
client.
|
|
#. Depending on the program you need to connect to the Pi using the IP address as the hostname and the username and password the same as you used to connect
|
|
via SSH and ensure your connection type is set to **SFTP**
|
|
#. Browse to ``/root/tuya-convert/files``.
|
|
#. Upload your compiled ``firmware.bin`` file to this directory. For command line based installs you can access the file under
|
|
``<CONFIG_DIR>/<NODE_NAME>/.pioenvs/<NODE_NAME>/firmware.bin`` alternatively Home Assistant add-on users can download the file directly from the web ui.
|
|
|
|
2.7 Use tuya-convert to install ESPHome Firmware
|
|
************************************************
|
|
|
|
#. Type ``./start_flash.sh``
|
|
#. Type ``yes`` to accept the warning.
|
|
#. Connect your alternative WiFi device (non iOS / Apple based) to the ``vtrust-flash`` SSID using ``flashmeifyoucan`` as the password. This is the network
|
|
being broadcast by the Pi from the tuya flash script.
|
|
#. If you haven't already install your bulb and flip the switch. It should automatically enter pairing mode represented by the bulb flashing on and off. If it
|
|
doesn't, switch your bulb, on-off-on-off-on as per the instructions `here
|
|
<https://img1.wsimg.com/blobby/go/67cdd3b9-3600-4104-b097-603c05201237/downloads/1cq3j1sq1_277630.pdf>`__.
|
|
#. Press enter on your putty window to start the flash process and wait. The bulb will stop flashing followed by a large amount of scrolling text, this is the
|
|
script backing up the factory shipped firmware.
|
|
#. Once the process is complete you can type ``curl http://10.42.42.42/flashURL?url=http://10.42.42.1/files/firmware.bin``
|
|
#. The bulb will restart and if everything is working correctly after a few seconds the light should be on.
|
|
|
|
3. Bulb Configurations
|
|
----------------------
|
|
|
|
Thanks to the `existing work <https://github.com/arendst/Sonoff-tasmota/wiki/Mirabella-Genio-Bulb>`__ by
|
|
`@so3n <https://github.com/arendst/Sonoff-tasmota/wiki/Mirabella-Genio-Bulb>`__ which these adaptions created by `@cryptelli
|
|
<https://community.home-assistant.io/u/cryptelli>`__ and `@bircoe <https://community.home-assistant.io/u/bircoe>`__ are based on.
|
|
|
|
|
|
3.1 Monochromatic Bulbs
|
|
***********************
|
|
|
|
The brightness of the bulb can be controlled using the ``esp8266_pwm`` output component connected to the light component using the id configuration
|
|
variable ``output_component1``.
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: mirabella_genio_cw_1
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
logger:
|
|
|
|
api:
|
|
|
|
ota:
|
|
|
|
light:
|
|
- platform: monochromatic
|
|
name: "Mirabella Genio Smart Bulb"
|
|
id: light
|
|
output: output_component1
|
|
|
|
# Ensure the light turns on by default if the physical switch is actuated.
|
|
restore_mode: ALWAYS_ON
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_component1
|
|
# May need to use GPIO14 instead for certain globes
|
|
pin: GPIO13
|
|
|
|
|
|
3.2 Cold + Warm White Bulbs
|
|
***************************
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: mirabella_genio_cwww_1
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
logger:
|
|
|
|
api:
|
|
|
|
ota:
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_warm_white
|
|
pin: GPIO13
|
|
- platform: esp8266_pwm
|
|
id: output_daylight
|
|
pin: GPIO5
|
|
|
|
light:
|
|
- platform: cwww
|
|
name: "Mirabella Genio Smart Bulb"
|
|
id: light
|
|
cold_white: output_daylight
|
|
warm_white: output_warm_white
|
|
cold_white_color_temperature: 6500 K
|
|
warm_white_color_temperature: 2700 K
|
|
|
|
# Ensure the light turns on by default if the physical switch is actuated.
|
|
restore_mode: ALWAYS_ON
|
|
|
|
3.3 RGBW Color Bulbs
|
|
********************
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: rgbw_e27_01
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
logger:
|
|
|
|
api:
|
|
|
|
ota:
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_red
|
|
pin: GPIO4
|
|
- platform: esp8266_pwm
|
|
id: output_green
|
|
pin: GPIO12
|
|
- platform: esp8266_pwm
|
|
id: output_blue
|
|
pin: GPIO14
|
|
- platform: esp8266_pwm
|
|
id: output_white
|
|
pin: GPIO5
|
|
|
|
light:
|
|
- platform: rgbw
|
|
name: "rgbw_e27_01"
|
|
id: light
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
white: output_white
|
|
|
|
# Ensure the light turns on by default if the physical switch is actuated.
|
|
restore_mode: ALWAYS_ON
|
|
|
|
3.4 CWWW Mirabella Genio Downlights
|
|
***********************************
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: rgbw_e27_01
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
logger:
|
|
|
|
api:
|
|
|
|
ota:
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output1
|
|
pin: GPIO14
|
|
- platform: esp8266_pwm
|
|
id: output2
|
|
pin: GPIO12
|
|
|
|
light:
|
|
- platform: cwww2
|
|
id: LED
|
|
name: "Downlight"
|
|
color_temperature: output2
|
|
brightness: output1
|
|
cold_white_color_temperature: 6500 K
|
|
warm_white_color_temperature: 2700 K
|
|
|
|
# Ensure the light turns on by default if the physical switch is actuated.
|
|
restore_mode: ALWAYS_ON
|
|
|
|
|
|
4. Adding to Home Assistant
|
|
---------------------------
|
|
|
|
You can now add your bulb to home assistant via the configurations page, look for 'ESPHome' under the Integrations option and click 'Configure'.
|
|
|
|
.. figure:: images/mirabella-genio-b22-rgbw-homeassistant.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/light/index`
|
|
- :doc:`/components/light/monochromatic`
|
|
- :doc:`/components/light/cwww`
|
|
- :doc:`/components/light/rgbw`
|
|
- :doc:`/components/output/index`
|
|
- :doc:`/components/output/esp8266_pwm`
|
|
- :doc:`/guides/automations`
|
|
- :ghedit:`Edit`
|