mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-17 11:05:39 +01:00
104 lines
4.0 KiB
ReStructuredText
104 lines
4.0 KiB
ReStructuredText
Combine the state of several sensors
|
|
====================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up a combination sensor
|
|
|
|
The ``combination`` sensor platform allows you to combine the state of several
|
|
sensors into one. To use this sensor, specify the combination type and add your source sensors.
|
|
|
|
The ``unit_of_measurement``, ``device_class``, ``entity_category``, ``icon``, and
|
|
``accuracy_decimals`` properties are by default inherited from the first sensor.
|
|
``state_class`` is explicitly not inherited, because ``total_increasing`` states
|
|
could still decrease when multiple sensors are used for several of the combination types.
|
|
|
|
The source sensor states can be combined in several ways:
|
|
|
|
- ``KALMAN`` filter: This type filters one or several
|
|
sensors into one with a reduced error. If using a single sensor as data source,
|
|
it acts like a :ref:`sensor-filter-exponential_moving_average` filter. With
|
|
multiple sensors, it combines their values based on their respective standard
|
|
deviation.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: combination
|
|
type: kalman
|
|
name: "Temperature"
|
|
process_std_dev: 0.001
|
|
sources:
|
|
- source: temperature_sensor_1
|
|
error: 1.0
|
|
- source: temperature_sensor_2
|
|
error: !lambda |-
|
|
return 0.5 + std::abs(x - 25) * 0.023
|
|
|
|
- ``LINEAR`` combination: This type sums all source sensors after multiplying each by
|
|
a configured coeffecient.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: combination
|
|
type: linear
|
|
name: "Balance Power"
|
|
sources:
|
|
- source: total_power
|
|
coeffecient: 1.0
|
|
- source: circuit_1_power
|
|
coeffecient: -1.0
|
|
|
|
- ``MAXIMUM``, ``MEAN``, ``MEDIAN``, ``MINIMUM``, ``MOST_RECENTLY_UPDATED``,
|
|
``RANGE``, ``SUM`` combinations: These types compute the specified combination among
|
|
all source sensor states.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: combination
|
|
type: median
|
|
name: "Median Temperature"
|
|
sources:
|
|
- source: temperature_sensor_1
|
|
- source: temperature_sensor_2
|
|
- source: temperature_sensor_3
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **type** (**Required**, enum): Combination statistic type, should be one of
|
|
``KALMAN``, ``LINEAR``, ``MAXIMUM``, ``MEAN``, ``MEDIAN``, ``MINIMUM``,
|
|
``MOST_RECENTLY_UPDATED``, ``RANGE``, or ``SUM``.
|
|
- **sources** (**Required**, list): A list of sensors to use as source.
|
|
|
|
- **source** (**Required**, :ref:`config-id` of a :doc:`/components/sensor/index`): The
|
|
sensor id that is used as sample source.
|
|
- **error** (**Required** - only for ``KALMAN`` type, float, :ref:`templatable <config-templatable>`):
|
|
The standard deviation of the sensor's measurements. This works like the ``process_std_dev``
|
|
parameter, with low values marking accurate data. If implemented as a template, the
|
|
measurement is in parameter ``x``.
|
|
- **coeffecient** (**Required** - only for ``LINEAR`` type, float, :ref:`templatable <config-templatable>`):
|
|
The coeffecient to multiply the sensor's state by before summing all source sensor states.
|
|
If implemented as a template, the measurement is in parameter ``x``.
|
|
|
|
- **process_std_dev** (**Required** - only for ``KALMAN`` type, float): The standard deviation of the
|
|
measurement's change per second (e.g. ``1/3600 = 0.000277`` if the
|
|
temperature usually changes at most by one Kelvin per hour). A low value here
|
|
will place high importance on the current state and be slow to respond to
|
|
changes in the measured samples. A high value will update faster, but also be
|
|
more noisy.
|
|
- **std_dev** (*Optional - only for KALMAN type*, :ref:`Sensor <config-sensor>`): A sensor
|
|
that publishes the current standard deviation of the state with each update.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :apiref:`combination/combination.h`
|
|
- :ghedit:`Edit`
|