mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-12 10:24:00 +01:00
52 lines
1.7 KiB
ReStructuredText
52 lines
1.7 KiB
ReStructuredText
Generic ESP32
|
|
=============
|
|
|
|
All ESP32-based devices are supported by esphomeyaml. Simply select ``ESP32`` when
|
|
the esphomeyaml wizard asks you for your platform and choose a board type
|
|
from `this link <http://docs.platformio.org/en/latest/platforms/espressif32.html>`__ when the wizard
|
|
asks you for the board type.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
esphomeyaml:
|
|
name: livingroom
|
|
platform: ESP32
|
|
board: <BOARD_TYPE>
|
|
|
|
The ESP32 boards often use the internal GPIO pin numbering on the board, this means that
|
|
you don't have to worry about other kinds of pin numberings, yay!
|
|
|
|
Some notes about the pins on the ESP32:
|
|
|
|
- ``GPIO0`` is used to determine the boot mode on startup. It should therefore not be pulled LOW
|
|
on startup to avoid booting into flash mode. You can, however, still use this as an output pin.
|
|
- ``GPIO34``-``GPIO39`` can not be used as outputs (even though GPIO stands for "general purpose input
|
|
**output**"...)
|
|
- ``GPIO32``-``GPIO39``: These pins can be used with the :doc:`/esphomeyaml/components/sensor/adc` to measure
|
|
voltages.
|
|
- ``GPIO2``: This pin is connected to the blue LED on the board as seen in above picture. It also supports
|
|
the :doc:`touch pad binary sensor </esphomeyaml/components/binary_sensor/esp32_touch>` like some other
|
|
pins.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
esphomeyaml:
|
|
name: livingroom
|
|
platform: ESP32
|
|
board: <BOARD_TYPE>
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
name: "Pin GPIO23"
|
|
pin: GPIO23
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`nodemcu_esp32`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/devices/esp32.rst>`__
|
|
|
|
.. disqus::
|