mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-08 09:52:07 +01:00
73 lines
2.4 KiB
ReStructuredText
73 lines
2.4 KiB
ReStructuredText
Remote Receiver Binary Sensor
|
|
=============================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up remote receiver binary sensors for infrared and RF codes.
|
|
:image: remote.svg
|
|
|
|
The ``remote_receiver`` binary sensor lets you track when a button on a remote control is pressed.
|
|
|
|
Each time the pre-defined signal is received, the binary sensor will briefly go ON and
|
|
then immediately OFF.
|
|
|
|
.. code:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
pin: GPIO32
|
|
dump: all
|
|
|
|
binary_sensor:
|
|
- platform: remote_receiver
|
|
name: "Panasonic Remote Input"
|
|
panasonic:
|
|
address: 0x4004
|
|
command: 0x100BCBD
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **name** (**Required**, string): The name for the binary sensor.
|
|
- The remote code, see :ref:`remote_transmitter-codes`. Only one
|
|
of them can be specified per binary sensor.
|
|
- **remote_receiver_id** (*Optional*, :ref:`config-id`): The id of the :doc:`/esphomeyaml/components/remote_receiver`.
|
|
Defaults to the first hub in your configuration.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Binary Sensor <config-binary_sensor>`
|
|
and :ref:`MQTT Component <config-mqtt-component>`.
|
|
|
|
.. note::
|
|
|
|
See :ref:`finding_remote_codes` for a guide for setting this up.
|
|
|
|
.. note::
|
|
|
|
For the Sonoff RF Bridge you can use `this hack <https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-RF-Bridge---Direct-Hack>`__
|
|
created by the Github user wildwiz. Then use this configuration for the remote receiver/transmitter hubs:
|
|
|
|
.. code:: yaml
|
|
|
|
remote_receiver:
|
|
pin: 4
|
|
dump: all
|
|
|
|
remote_transmitter:
|
|
pin: 5
|
|
carrier_duty_percent: 100%
|
|
|
|
Supporting the RF Bridge chip directly is currently only a long-term goal for esphomelib.
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`/esphomeyaml/components/remote_receiver`
|
|
- :doc:`/esphomeyaml/components/remote_transmitter`
|
|
- `RCSwitch <https://github.com/sui77/rc-switch>`__ by `Suat Özgür <https://github.com/sui77>`__
|
|
- `IRRemoteESP8266 <https://github.com/markszabo/IRremoteESP8266/>`__ by `Mark Szabo-Simon <https://github.com/markszabo>`__
|
|
- :doc:`API Reference </api/binary_sensor/remote_receiver>`
|
|
- `Edit this page on GitHub <https://github.com/OttoWinter/esphomedocs/blob/current/esphomeyaml/components/binary_sensor/remote_receiver.rst>`__
|
|
|
|
.. disqus::
|