106 lines
2.8 KiB
ReStructuredText
106 lines
2.8 KiB
ReStructuredText
Ilonda Wifi Smart Fish Feeder (L88)
|
|
===================================
|
|
|
|
Ilonda Wifi Smart Fish Feeder (L88) is a Tuya-based device sold by Amazon (not only under Ilonda, but also under other brand names).
|
|
|
|
.. figure:: images/ilonda-wifi-smart-fish-feeder.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Originally intended to be used with its companion app, once flashed using `tuya-convert <https://github.com/ct-Open-Source/tuya-convert>`__, ESPHome generated
|
|
firmware can be uploaded allowing you to control the Wifi Smart Fish Feeder via Home Assistant.
|
|
|
|
Wifi Smart Fish Feeder Configuration
|
|
------------------------------------
|
|
|
|
Thanks to the amazing `Tasmota template <https://templates.blakadder.com/ilonda_L88.html>`__,
|
|
managed to build a fully working esphome configuration. This assumes you have a secret.yaml with ssid and password keys.
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: wifi_smart_fish_feeder
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
logger:
|
|
|
|
api:
|
|
|
|
ota:
|
|
|
|
# Binary Sensor to allow relay to be switched when physical button is pressed
|
|
binary_sensor:
|
|
- platform: gpio
|
|
id: button
|
|
pin:
|
|
number: GPIO4
|
|
mode:
|
|
input: true
|
|
pullup: true
|
|
inverted: True
|
|
name: 'Switch feeder'
|
|
on_press:
|
|
- switch.turn_on: relay
|
|
|
|
- platform: status
|
|
name: "Status"
|
|
|
|
switch:
|
|
# Switch to turn feeder on for 3 seconds/off and turn on/off LED
|
|
- platform: gpio
|
|
name: 'Relay feeder'
|
|
id: relay
|
|
pin: GPIO14
|
|
on_turn_on:
|
|
- light.turn_on: led
|
|
- delay: 3s
|
|
- switch.turn_off: relay
|
|
- light.turn_off: led
|
|
restore_mode: ALWAYS_OFF
|
|
|
|
sensor:
|
|
# Feeder counter
|
|
- platform: pulse_meter
|
|
pin: GPIO12
|
|
name: 'Counter/min'
|
|
unit_of_measurement: 'time(s)'
|
|
internal: true
|
|
total:
|
|
unit_of_measurement: 'time(s)'
|
|
name: 'Counter feeder'
|
|
|
|
# To allow led to be controlled via GPIO
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: blue_led
|
|
pin:
|
|
number: GPIO5
|
|
inverted: true
|
|
|
|
# LED control
|
|
light:
|
|
- platform: monochromatic
|
|
output: blue_led
|
|
id: led
|
|
|
|
|
|
You can now add your Wifi Smart Fish Feeder to Home Assistant via the configurations page, look for 'ESPHome' under the Integrations option and click 'Configure'.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/binary_sensor/gpio`
|
|
- :doc:`/components/switch/gpio`
|
|
- :doc:`/components/sensor/pulse_meter`
|
|
- :doc:`/components/output/esp8266_pwm`
|
|
- :doc:`/components/light/monochromatic`
|
|
- :doc:`/guides/automations`
|
|
- `Fish Feeder diagrams and pictures <https://community.openhab.org/t/ilonda-fish-feeder-openhab/99190>`__.
|
|
- :ghedit:`Edit`
|