esphome-docs/cookbook/teckin_sb50.rst
Justyn Shull facd786a94
Update teckin sb50 entry as they cannot be flashed anymore (#878)
* Update teckin sb50 entry as they cannot be flashed

Unfortunately these bulbs are now shipping with a newer firmware that can no longer be flashed by tuya-convert.

Please see:

- https://github.com/esphome/issues/issues/1289
- https://github.com/ct-Open-Source/tuya-convert/issues/483
- https://github.com/ct-Open-Source/tuya-convert/issues/586

* Update format

* Fix typo

Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
2020-12-13 14:44:50 +01:00

90 lines
2.4 KiB
ReStructuredText

TECKIN SB50 LED Bulb
====================
.. seo::
:description: ESPHome configuration for Teckin SB50 LED Bulb.
:image: images/teckin_sb50.jpg
:keywords: Teckin SB50
.. figure:: images/teckin_sb50.jpg
:align: center
:width: 50.0%
.. warning::
It is not currently possible to flash these bulbs with ``tuya-convert`` due to shipping with an updated/patched firmware.
Please check `this issue <https://github.com/ct-Open-Source/tuya-convert/issues/483>`__ for details and progress on a workaround.
The Teckin SB50 Bulb's are a great option for lighting that could previously be flashed with tuya-convert. More details can be found at tuya-convert `github page <https://github.com/ct-Open-Source/tuya-convert>`__.
Below is the ESPHome configuration file that will get you up and running. This assumes you have a ``secret.yaml`` with ssid, password, api_password and ota_password keys.
.. code-block:: yaml
substitutions:
devicename: <Enter a name for your light here>
esphome:
name: $devicename
platform: ESP8266
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable logging to ESPHome
logger:
# Disable logging to serial
baud_rate: 0
# Enable Home Assistant API
api:
password: !secret api_password
# Setup OTA password
ota:
password: !secret ota_password
# Define output pins
output:
- platform: esp8266_pwm
id: output_red
pin: GPIO4
- platform: esp8266_pwm
id: output_green
pin: GPIO12
- platform: esp8266_pwm
id: output_blue
pin: GPIO14
- platform: esp8266_pwm
id: output_warm_white
pin: GPIO13
- platform: esp8266_pwm
id: output_cold_white
pin: GPIO5
# Define a light entity
light:
- platform: rgbww
name: $devicename
id: $devicename
red: output_red
green: output_green
blue: output_blue
warm_white: output_warm_white
cold_white: output_cold_white
cold_white_color_temperature: 6200 K
warm_white_color_temperature: 2800 K
color_interlock: true # avoids simultaneous RGB and W/W
See Also
--------
- :doc:`/devices/nodemcu_esp8266`
- :doc:`/cookbook/mirabella-genio-bulb`
- :doc:`/components/light/rgb`
- :doc:`/components/output/esp8266_pwm`
- :doc:`/components/binary_sensor/gpio`
- :ghedit:`Edit`