mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-08-31 00:19:54 +02:00
* Update leak-detector-m5stickC.rst 1) The ST7735 display is now natively supported in ESPHome >1.16.0. Therefore the custom component is no longer needed. Also, ESPHome color handling seems to have changed, so that has been accounted for. Updated the instructions and code to reflect these. 2) Updated URL of esp32 bootloader 3) Added st7735 display docs link to footer * Update cookbook/leak-detector-m5stickC.rst Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
339 lines
10 KiB
ReStructuredText
339 lines
10 KiB
ReStructuredText
=============================================
|
|
ESP32 Water Leak Detector (with notification)
|
|
=============================================
|
|
|
|
.. seo::
|
|
:description: Water leak detector with ESPHome on an M5StickC ESP32
|
|
:image: images/leak-detector-m5stickC_dry.jpg
|
|
:keywords: Leak Detector M5StickC M5Stack M5Atom
|
|
|
|
Using the ESP32's capacitive touch GPIOs, it's relatively easy to build a water leak detector using ESPHome. M5StickC was chosen as a platform due to the integrated Grove connector for clean connections and the fact it's well housed. The built-in display is a bonus, but not strictly necessary. Notifications are performed via HomeAssistant's 'alert' and 'notify' facilities, which send via Pushover to iOS & Android.
|
|
|
|
.. figure:: images/leak-detector-m5stickC_LeakDetected.gif
|
|
:align: center
|
|
|
|
Things you'll need
|
|
==================
|
|
|
|
- `M5Stick axp192 custom component <https://github.com/airy10/esphome-m5stickC>`__
|
|
This is needed to power up the display. You don't need the st7735 display driver, as it is already included with ESPHome >1.16.0.
|
|
|
|
- M5StickC ESP32 development kit
|
|
`M5Stack Link <https://m5stack.com/collections/m5-core/products/stick-c>`__
|
|
|
|
.. figure:: images/leak-detector-m5stickC-m5stickC.png
|
|
:align: center
|
|
|
|
- Moisture sensor
|
|
This example uses a `Guardian Remote Sensor Probe <https://amazon.com/Guardian-by-Elexa-Remote-Sensor/dp/B07G5BMD7L>`__
|
|
which has a 6' cord.
|
|
|
|
.. figure:: images/leak-detector-m5stickC_probe.jpg
|
|
:align: center
|
|
|
|
- Grove connector pigtail
|
|
`Amazon Link <https://www.amazon.com/Cables-Grove-Female-Jumper-Grove-Conversion/dp/B01CNZ9EEC>`__
|
|
|
|
.. figure:: images/leak-detector-m5stickC_grove1.jpg
|
|
:align: center
|
|
|
|
- USB power supply with USB-C cable
|
|
(the M5StickC comes with the short black USB cable seen in the pictures)
|
|
|
|
------------
|
|
|
|
Probe Connection
|
|
================
|
|
|
|
Since the probe comes with an integrated 3.5mm male plug, a 3.5mm female jack has been connected to the Grove port to allow easy probe replacement in the future. Orange connects to orange, blue connects to blue. The pads on the opposite side of the probe are internally-connected identically to the front. The two middle rings on the 3.5mm jack are unused. There is no polarity -- simply connect one terminal (orange or blue) to Grove GND, and the other to Grove G33.
|
|
|
|
.. figure:: images/leak-detector-m5stickC_pinout.jpg
|
|
:align: center
|
|
|
|
.. figure:: images/leak-detector-m5stickC_grove2.jpg
|
|
:align: center
|
|
|
|
Assembled Components
|
|
====================
|
|
|
|
.. figure:: images/leak-detector-m5stickC_overview2.jpg
|
|
:align: center
|
|
|
|
.. note::
|
|
|
|
Even though the M5StickC has a battery inside (which might be enough to cover short power outages), you'll need to keep
|
|
the unit on USB power 24/7.
|
|
|
|
Display Font
|
|
============
|
|
|
|
You'll need to place the `OpenSans-Regular <https://fonts.google.com/specimen/Open+Sans>`__ font (or another of your choosing) alongside your ESPHome yaml file. See - :doc:`/components/display/index`.
|
|
|
|
Flashing
|
|
========
|
|
|
|
I initially had trouble flashing the M5StickC; this is the procedure that I've found to work well with these devices.
|
|
|
|
You must provide the ESP32 bootloader during the initial flash over USB. Compile your ESPHome binary, and flash it along with the required bootloader (bootloader_dio_80m.bin), `available here <https://github.com/espressif/arduino-esp32/tree/master/tools/sdk/esp32/bin>`__, from the commandline (example under macos):
|
|
|
|
``cd /Applications/ESPHome-Flasher-1.2.0-macOS.app/Contents/MacOS``
|
|
|
|
``./ESPHome-Flasher ~/Desktop/basement_leak_detector.bin --bootloader ~/Desktop/bootloader_dio_80m.bin --upload-baud-rate=115200``
|
|
|
|
I also needed this procedure to flash M5Stack ATOM Lite and ATOM Matrix modules, which you also might consider using for this project. Both are smaller and more cost-effective than the M5stickC, and a generation newer -- though they lack the TFT display.
|
|
|
|
.. figure:: images/leak-detector-m5stickC_atom_matrix.jpg
|
|
|
|
.. figure:: images/leak-detector-m5stickC_atom_lite.jpg
|
|
|
|
Calibration & Testing
|
|
=====================
|
|
|
|
Once everything is hooked up and flashed, enable ``esp32_touch:`` ``setup_mode: true`` and proceed to adjust the threshold setting on the touch-sensitive binary sensor (GPIO33) to find the proper value for your particular moisture sensor and cabling situation. Grab a glass of water for testing, another for yourself, and dip away while watching the logs. Your goal is to find a threshold value that is sufficient to trigger the binary sensor in water, but not otherwise. See :ref:`ESP32 Touch Pad <esp32-touch-binary-sensor>` for more information.
|
|
|
|
------------
|
|
|
|
Normal state
|
|
************
|
|
|
|
.. figure:: images/leak-detector-m5stickC_dry.jpg
|
|
:align: center
|
|
|
|
Wet state
|
|
*********
|
|
|
|
.. figure:: images/leak-detector-m5stickC_wet.jpg
|
|
:align: center
|
|
|
|
Installed Project
|
|
*****************
|
|
|
|
.. figure:: images/leak-detector-m5stickC_overview1.jpg
|
|
:align: center
|
|
|
|
Not shown: Probe is placed on the floor in the corner, out of the way, in the lowest part of the room
|
|
|
|
------------
|
|
|
|
ESPHome configuration
|
|
=====================
|
|
|
|
.. code-block:: yaml
|
|
|
|
substitutions:
|
|
devicename: basement_leak_detector
|
|
friendly_name: Basement Leak Detector
|
|
device_description: Leak detector in basement utility room
|
|
|
|
esphome:
|
|
name: $devicename
|
|
comment: ${device_description}
|
|
platform: ESP32
|
|
board: m5stick-c
|
|
platformio_options:
|
|
upload_speed: 115200
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
domain: .lan
|
|
|
|
# Enable fallback hotspot (captive portal) in case wifi connection fails
|
|
ap:
|
|
ssid: "Basement Leak Det. Fallback AP"
|
|
password: !secret fallback_ap_password
|
|
|
|
manual_ip:
|
|
static_ip: x.x.x.x
|
|
gateway: x.x.x.x
|
|
subnet: x.x.x.x
|
|
|
|
captive_portal:
|
|
|
|
logger:
|
|
|
|
# Enable Home Assistant API & OTA Updates
|
|
api:
|
|
password: !secret api_password
|
|
ota:
|
|
password: !secret ota_password
|
|
|
|
status_led:
|
|
pin:
|
|
number: GPIO10
|
|
inverted: true
|
|
|
|
spi:
|
|
clk_pin: GPIO13
|
|
mosi_pin: GPIO15
|
|
|
|
i2c:
|
|
- id: bus_a
|
|
sda: GPIO21
|
|
scl: GPIO22
|
|
scan: true
|
|
|
|
esp32_touch:
|
|
#setup_mode: true
|
|
iir_filter: 10ms
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO37
|
|
inverted: true
|
|
id: button_a
|
|
on_press:
|
|
then:
|
|
- switch.toggle: led1
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO39
|
|
inverted: true
|
|
id: button_b
|
|
on_press:
|
|
then:
|
|
- switch.toggle: led1
|
|
- platform: status
|
|
name: "${friendly_name} Status"
|
|
- platform: esp32_touch
|
|
name: "${friendly_name} Sensor"
|
|
device_class: moisture
|
|
id: leak
|
|
pin: GPIO33
|
|
threshold: 30
|
|
on_press:
|
|
- while:
|
|
condition:
|
|
binary_sensor.is_on: leak
|
|
then:
|
|
- switch.turn_on: led1
|
|
- delay: 200ms
|
|
- switch.turn_off: led1
|
|
- delay: 100ms
|
|
- switch.turn_on: led1
|
|
- delay: 200ms
|
|
- switch.turn_off: led1
|
|
- delay: 400ms
|
|
on_release:
|
|
then:
|
|
- switch.turn_off: led1
|
|
|
|
sensor:
|
|
- platform: uptime
|
|
name: "${friendly_name} Uptime"
|
|
|
|
# AXP192 power management - must be present to initialize TFT power on
|
|
- platform: axp192
|
|
address: 0x34
|
|
i2c_id: bus_a
|
|
update_interval: 30s
|
|
battery_level:
|
|
name: "${friendly_name} Battery Level"
|
|
id: "m5stick_batterylevel"
|
|
|
|
- platform: wifi_signal
|
|
name: "${friendly_name} WiFi Signal"
|
|
update_interval: 60s
|
|
|
|
text_sensor:
|
|
- platform: version
|
|
name: "${friendly_name} ESPHome version"
|
|
|
|
switch:
|
|
- platform: gpio
|
|
pin:
|
|
number: GPIO10
|
|
inverted: true
|
|
id: led1
|
|
|
|
font:
|
|
- file: 'OpenSans-Regular.ttf'
|
|
id: font1
|
|
size: 66
|
|
|
|
# wonky color fix, in lieu of finding a way to invert the display
|
|
color:
|
|
- id: color_wet
|
|
red: 100%
|
|
green: 100%
|
|
blue: 0%
|
|
- id: color_dry
|
|
red: 100%
|
|
green: 0%
|
|
blue: 100%
|
|
|
|
# built-in 80x160 TFT
|
|
display:
|
|
- platform: st7735
|
|
model: "INITR_MINI160X80"
|
|
device_height: 160
|
|
device_width: 82
|
|
col_start: 0
|
|
row_start: 0
|
|
eight_bit_color: false
|
|
cs_pin: GPIO5
|
|
dc_pin: GPIO23
|
|
reset_pin: GPIO18
|
|
lambda: |-
|
|
if (id(leak).state) {
|
|
it.fill(COLOR_ON);
|
|
it.print(42, -24, id(font1), id(color_wet), TextAlign::TOP_CENTER, "W");
|
|
it.print(42, 32, id(font1), id(color_wet), TextAlign::TOP_CENTER, "E");
|
|
it.print(42, 85, id(font1), id(color_wet), TextAlign::TOP_CENTER, "T");
|
|
} else {
|
|
it.fill(COLOR_ON);
|
|
it.print(42, -24, id(font1), id(color_dry), TextAlign::TOP_CENTER, "D");
|
|
it.print(42, 32, id(font1), id(color_dry), TextAlign::TOP_CENTER, "R");
|
|
it.print(42, 85, id(font1), id(color_dry), TextAlign::TOP_CENTER, "Y");
|
|
}
|
|
|
|
|
|
|
|
HomeAssistant configuration
|
|
===========================
|
|
|
|
There are two sections: one for alert criteria, and another for notification via Pushover.
|
|
See HomeAssistant's `Pushover integration docs <https://www.home-assistant.io/integrations/pushover/>`__ for more details.
|
|
|
|
.. code-block:: yaml
|
|
|
|
alert:
|
|
basement_water_leak:
|
|
name: Water detected in the basement
|
|
entity_id: binary_sensor.basement_leak_detector_sensor
|
|
state: 'on'
|
|
repeat: 30
|
|
can_acknowledge: true
|
|
notifiers:
|
|
- water_leak_notification_group
|
|
|
|
notify:
|
|
- name: pushover
|
|
platform: pushover
|
|
api_key: !secret pushover_api_key
|
|
user_key: !secret pushover_user_key
|
|
- name: water_leak_notification_group
|
|
platform: group
|
|
services:
|
|
- service: pushover
|
|
data:
|
|
data:
|
|
# Pushover-provided sound effect (https://pushover.net/api#sounds)
|
|
sound: alien
|
|
|
|
|
|
Enjoy your locally-controlled leak detector with push notification!
|
|
|
|
.. figure:: images/leak-detector-m5stickC-ha_interface.jpg
|
|
:align: center
|
|
|
|
|
|
See Also
|
|
========
|
|
|
|
- :doc:`/components/display/index`
|
|
- :doc:`/components/display/st7735`
|
|
- :doc:`/components/binary_sensor/esp32_touch`
|
|
- :ghedit:`Edit`
|