mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-08-31 00:19:54 +02:00
90 lines
2.4 KiB
ReStructuredText
90 lines
2.4 KiB
ReStructuredText
TECKIN SB50 LED Bulb
|
|
====================
|
|
|
|
.. seo::
|
|
:description: ESPHome configuration for Teckin SB50 LED Bulb.
|
|
:image: images/teckin_sb50.jpg
|
|
:keywords: Teckin SB50
|
|
|
|
.. figure:: images/teckin_sb50.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
.. warning::
|
|
|
|
It is not currently possible to flash these bulbs with ``tuya-convert`` due to shipping with an updated/patched firmware.
|
|
Please check `this issue <https://github.com/ct-Open-Source/tuya-convert/issues/483>`__ for details and progress on a workaround.
|
|
|
|
The Teckin SB50 Bulb's are a great option for lighting that could previously be flashed with tuya-convert. More details can be found at tuya-convert `github page <https://github.com/ct-Open-Source/tuya-convert>`__.
|
|
Below is the ESPHome configuration file that will get you up and running. This assumes you have a ``secret.yaml`` with ssid, password, api_password and ota_password keys.
|
|
|
|
.. code-block:: yaml
|
|
|
|
substitutions:
|
|
devicename: <Enter a name for your light here>
|
|
|
|
esphome:
|
|
name: $devicename
|
|
platform: ESP8266
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
# Enable logging to ESPHome
|
|
logger:
|
|
# Disable logging to serial
|
|
baud_rate: 0
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
password: !secret api_password
|
|
|
|
# Setup OTA password
|
|
ota:
|
|
password: !secret ota_password
|
|
|
|
# Define output pins
|
|
output:
|
|
- platform: esp8266_pwm
|
|
id: output_red
|
|
pin: GPIO4
|
|
- platform: esp8266_pwm
|
|
id: output_green
|
|
pin: GPIO12
|
|
- platform: esp8266_pwm
|
|
id: output_blue
|
|
pin: GPIO14
|
|
- platform: esp8266_pwm
|
|
id: output_warm_white
|
|
pin: GPIO13
|
|
- platform: esp8266_pwm
|
|
id: output_cold_white
|
|
pin: GPIO5
|
|
|
|
# Define a light entity
|
|
light:
|
|
- platform: rgbww
|
|
name: $devicename
|
|
id: $devicename
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
warm_white: output_warm_white
|
|
cold_white: output_cold_white
|
|
cold_white_color_temperature: 6200 K
|
|
warm_white_color_temperature: 2800 K
|
|
color_interlock: true # avoids simultaneous RGB and W/W
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/devices/nodemcu_esp8266`
|
|
- :doc:`/cookbook/mirabella-genio-bulb`
|
|
- :doc:`/components/light/rgb`
|
|
- :doc:`/components/output/esp8266_pwm`
|
|
- :doc:`/components/binary_sensor/gpio`
|
|
- :ghedit:`Edit`
|