esphome-docs/guides/cli.rst

Command Line Interface
======================

.. seo::
    :description: Documentation for the command line interface of ESPHome.

Base Usage
----------

ESPHome's command line interface always has the following format

.. code-block:: console

    esphome [OPTIONS] <CONFIGURATION...> <COMMAND> [ARGUMENTS]

.. note::

    You can specify multiple configuration files in the command line interface,
    just list all files in front of the <COMMAND> like so:

    .. code-block:: console

    esphome livingroom.yaml kitchen.yaml run

``--help`` Option
--------------------

.. option:: -h|--help

    Output possible <commands> and [arguments].
    Note: you can also use ``--help`` for any command to get arguments specific to that command.
.. code-block:: console

    esphome <some_command> --help

``--verbose`` Option
--------------------

.. option:: -v|--verbose

    Enable verbose esphome logs.

``--quiet`` Option
------------------

.. option:: -q|--quiet

    Disable all esphome logs.

``--substitution`` Option
-------------------------

*(can be issued multiple times)*

.. option:: -s|--substitution KEY VALUE

    Defines or overrides substitution KEY with value VALUE.

Please see :ref:`command line substitutions <command-line-substitutions>` for details.

``run`` Command
---------------

The ``esphome <CONFIG> run`` command is the most common command for ESPHome. It

* Validates the configuration
* Compiles a firmware
* Uploads the firmware (over OTA or USB)
* Starts the log view

.. program:: esphome run

.. option:: --upload-port UPLOAD_PORT

    Manually specify the upload port/ip to use. For example ``/dev/cu.SLAB_USBtoUART``.

.. option:: --no-logs

    Disable starting log view.

.. option:: --topic TOPIC

    Manually set the topic to subscribe to for MQTT logs (defaults to the one in the configuration).

.. option:: --username USERNAME

    Manually set the username to subscribe with for MQTT logs (defaults to the one in the configuration).

.. option:: --password PASSWORD

    Manually set the password to subscribe with for MQTT logs (defaults to the one in the configuration).

.. option:: --client-id CLIENT_ID

    Manually set the client ID to subscribe with for MQTT logs (defaults to a randomly chosen one).

.. option:: --host-port HOST_PORT

    Specify the host port to use for legacy Over the Air uploads.

``config`` Command
------------------

.. program:: esphome config

The ``esphome <CONFIG> config`` validates the configuration and displays the validation result.


``compile`` Command
-------------------

.. program:: esphome compile

The ``esphome <CONFIG> compile`` validates the configuration and compiles the firmware.

.. option:: --only-generate

    If set, only generates the C++ source code and does not compile the firmware.

``upload`` Command
------------------

.. program:: esphome upload

The ``esphome <CONFIG> upload`` validates the configuration and uploads the most recent firmware build.

.. option:: --upload-port UPLOAD_PORT

    Manually specify the upload port/IP to use. For example ``/dev/cu.SLAB_USBtoUART``.

.. option:: --host-port HOST_PORT

    Specify the host port to use for legacy Over the Air uploads.

``clean-mqtt`` Command
----------------------

.. program:: esphome clean-mqtt

The ``esphome <CONFIG> clean-mqtt`` cleans retained MQTT discovery messages from the MQTT broker.
See :ref:`mqtt-using_with_home_assistant`.

.. option:: --topic TOPIC

    Manually set the topic to clean retained messages from (defaults to the MQTT discovery topic of the
    node).

.. option:: --username USERNAME

    Manually set the username to subscribe with.

.. option:: --password PASSWORD

    Manually set the password to subscribe with.

.. option:: --client-id CLIENT_ID

    Manually set the client ID to subscribe with.

``wizard`` Command
------------------

.. program:: esphome wizard

The ``esphome <CONFIG> wizard`` command starts the ESPHome configuration creation wizard.

``mqtt-fingerprint`` Command
----------------------------

.. program:: esphome mqtt-fingerprint

The ``esphome <CONFIG> mqtt-fingerprint`` command shows the MQTT SSL fingerprints of the remote used
for SSL MQTT connections. See :ref:`mqtt-ssl_fingerprints`.

``version`` Command
-------------------

.. program:: esphome version

The ``esphome <CONFIG> version`` command shows the current ESPHome version and exits.

``clean`` Command
-----------------

.. program:: esphome clean

The ``esphome <CONFIG> clean`` command cleans all build files and can help with some build issues.

``hass-config`` Command
-----------------------

.. program:: esphome hass-config

The ``esphome <CONFIG> hass-config`` command shows an auto-generated Home Assistant configuration for the ESPHome
node configuration file. This is useful if you're not using MQTT discovery.

``dashboard`` Command
---------------------

.. program:: esphome dashboard

The ``esphome <CONFIG> dashboard`` command starts the ESPHome dashboard server for using ESPHome
through a graphical user interface.

.. option:: --port PORT

    Manually set the HTTP port to open connections on (defaults to 6052)

.. option:: --username USERNAME

    The optional username to require for authentication.

.. option:: --password PASSWORD

    The optional password to require for authentication.

.. option:: --open-ui

    If set, opens the dashboard UI in a browser once the server is up and running.

``logs`` Command
---------------------

.. program:: esphome logs

The ``esphome <CONFIG> logs`` command validates the configuration and shows all logs.

.. option:: --topic TOPIC

    Manually set the topic to subscribe to.

.. option:: --username USERNAME

    Manually set the username.

.. option:: --password PASSWORD

    Manually set the password.

.. option:: --client-id CLIENT_ID

    Manually set the client id.

.. option:: --serial-port SERIAL_PORT

    Manually specify a serial port to use. For example ``/dev/cu.SLAB_USBtoUART``.