esphome-docs/components/sensor/max9611.rst
mckaymatthew a8338a898f
Add Max9611 Docs (#1612)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 22:56:42 +13:00

79 lines
2.5 KiB
ReStructuredText

MAX9611/9612 High Side Current+Voltage+Temperature Sensor
=========================================================
.. seo::
:description: Instructions for setting up MAX9611 MAX9612 High-Side Current-Sense Amplifier
:image: max9611.jpg
:keywords: MAX9611 MAX9612
The ``MAX9611`` sensor platform allows you to use your MAX9611/MAX9612
(`datasheet <https://datasheets.maximintegrated.com/en/ds/MAX9611-MAX9612.pdf>`__)
High-side current, voltage and temperature sensors with ESPHome.
This sensor supports up to +60V DC common mode voltage, has a 1.8V to 3.3V logic range,
a 12-Bit integrated ADC with :ref:`I²C <i2c>`, and is meant to act as a high-side current sense amplifier.
The :ref:`I²C <i2c>` is
required to be set up in your configuration for this sensor to work.
.. figure:: images/max9611.jpg
:align: center
:width: 50.0%
MAX9611 High-Side Current-Sense Amplifier
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: max9611
shunt_resistance: 0.2 ohm
gain: '1X'
voltage:
name: Max9611 Voltage
current:
name: Max9611 Current
power:
name: Max9611 Watts
temperature:
name: Max9611 Temperature
address: 0x70
update_interval: 60s
Configuration variables:
------------------------
- **shunt_resistance** (*Required*): The value of the High Side Shunt Resistor.
- **Voltage** (*Optional*): The information for the voltage sensor
- **name** (**Required**, string): The name for the voltage sensor.
- All other options from :ref:`Sensor <config-sensor>`.
- **Current** (*Optional*): The information for the current sensor, scaled by the gain factor and multiplied by voltage
- **name** (**Required**, string): The name for the current sensor.
- All other options from :ref:`Sensor <config-sensor>`.
- **Power** (*Optional*): The information for the power sensor
- **name** (**Required**, string): The name for the power sensor.
- All other options from :ref:`Sensor <config-sensor>`.
- **temperature** (*Optional*): The information for the temperature sensor
- **name** (**Required**, string): The name for the temperature sensor.
- All other options from :ref:`Sensor <config-sensor>`.
- **address** (*Optional*, int): Manually specify the I²C address of
the sensor. Defaults to ``0x70``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
sensor. Defaults to ``60s``.
See Also
--------
- :ref:`sensor-filters`
- :ghedit:`Edit`