esphome-docs/components/rtttl.rst
Guillermo Ruffino 6533c87ecd
fix typo
2020-07-27 11:45:54 +02:00

163 lines
4.5 KiB
ReStructuredText

Rtttl Buzzer
============
.. seo::
:description: Instructions for setting up a buzzer to play tones and rtttl songs with ESPHome.
:image: crosshair-gps.png
The ``rtttl``, component allows you to easily connect a passive piezo buzzer to your microcontroller
and play monophonic songs. It accepts the Ring Tone Text Transfer Language, rtttl format (`Wikipedia
<https://en.wikipedia.org/wiki/Ring_Tone_Transfer_Language>`__) which allows to store simple melodies.
.. figure:: images/buzzer.jpg
:align: center
:width: 50.0%
Buzzer Module
Overview
--------
It's important that your buzzer is a **passive** one, if it beeps when you feed it with 3.3V then it is not
a passive one and this library will not work properly.
The tone generator needs a PWM capable output to work with, currently only the
:doc:`ESP8266 Software PWM Output<output/esp8266_pwm>` and
:doc:`ESP32 LEDC Output <output/ledc>` are supported.
.. code-block:: yaml
# Example configuration entry
output:
- platform: ledc
pin: GPIO22
id: rtttl_out
rtttl:
output: rtttl_out
Configuration variables:
------------------------
- **output** (**Required**, :ref:`config-id`): The id of the :ref:`float output <output>` to use for
this buzzer.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **on_finished_playback** (*Optional*, :ref:`Automation <automation>`): An action to be
performed when playback is finished.
``rtttl.play`` Action
---------------------
Plays an rtttl tone.
.. code-block:: yaml
on_...:
then:
- rtttl.play: 'MissionImp:d=16,o=6,b=95:32d,32d#,32d,32d#,32d,32d#,32d,32d#,32d,32d,32d#,32e,32f,32f#,32g,g,8p,g,8p,a#,p,c7,p,g,8p,g,8p,f,p,f#,p,g,8p,g,8p,a#,p,c7,p,g,8p,g,8p,f,p,f#,p,a#,g,2d,32p,a#,g,2c#,32p,a#,g,2c,a#5,8c,2p,32p,a#5,g5,2f#,32p,a#5,g5,2f,32p,a#5,g5,2e,d#,8d'
Configuration options:
- **play** (**Required**, string, :ref:`templatable <config-templatable>`): The rtttl string.
You can find many rtttl strings online on the web, they must start with a name, then a colon: ``:`` symbol
and more codes of the song itself. Tip: you can try playing with the values of d=16,o=6,b=95 and make the
song play at a different pace or pitch, e.g. setting o=7 instead will cause the song to play on a higher pitch.
``rtttl.stop`` Action
---------------------
Stops playback.
.. code-block:: yaml
on_...:
then:
- rtttl.stop
All actions
-----------
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID of the rtttl if you have multiple components.
``rtttl.is_playing`` Condition
------------------------------
This Condition returns true while playback is active.
.. code-block:: yaml
# In some trigger:
on_...:
if:
condition:
rtttl.is_playing
then:
logger.log: 'Playback is active!'
Common beeps
------------
You can do your own beep patterns too! Here are a few I made so you can just use right away or tweak them to your
like:
.. code-block:: yaml
two short:d=4,o=5,b=100:16e6,16e6
long:d=1,o=5,b=100:e6
siren:d=8,o=5,b=100:d,e,d,e,d,e,d,e
scale_up:d=32,o=5,b=100:c,c#,d#,e,f#,g#,a#,b
Test setup
----------
With the following code you can quickly setup a node and use Home Assistant's service in the developer tools.
E.g. for calling ``rtttl.play`` select the service ``esphome.test_esp8266_rtttl_play`` and in service data enter
.. code-block:: yaml
song_str: "mario:d=4,o=5,b=100:16e6,16e6,32p,8e6,16c6,8e6,8g6,8p,8g,8p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,16p,8c6,16p,8g,16p,8e,16p,8a,8b,16a#,8a,16g.,16e6,16g6,8a6,16f6,8g6,8e6,16c6,16d6,8b,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16c7,16p,16c7,16c7,p,16g6,16f#6,16f6,16d#6,16p,16e6,16p,16g#,16a,16c6,16p,16a,16c6,16d6,8p,16d#6,8p,16d6,8p,16c6"
Sample code
***********
.. code-block:: yaml
esphome:
name: test_esp8266
platform: ESP8266
board: nodemcuv2
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_pass
output:
- platform: esp8266_pwm
pin: D1
id: rtttl_out
rtttl:
output: rtttl_out
on_finished_playback:
- logger.log: 'Song ended!'
api:
services:
- service: play_rtttl
variables:
song_str: string
then:
- rtttl.play:
rtttl: !lambda 'return song_str;'
See Also
--------
- :apiref:`rtttl/rtttl.h`
- :ghedit:`Edit`