mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-06-28 10:55:09 +02:00
131 lines
4.1 KiB
ReStructuredText
131 lines
4.1 KiB
ReStructuredText
Climate Component
|
|
=================
|
|
|
|
.. seo::
|
|
:description: Information about the base representation of all climate devices.
|
|
:image: folder-open.png
|
|
|
|
ESPHome has support for climate devices. Climate devices can represent different types of
|
|
hardware, but the defining factor is that climate devices have a settable target temperature
|
|
and can be put in different modes like HEAT, COOL, AUTO or OFF.
|
|
|
|
.. figure:: images/climate-ui.png
|
|
:align: center
|
|
:width: 60.0%
|
|
|
|
Climate Device UI in Home Assistant.
|
|
|
|
.. _config-climate:
|
|
|
|
Base Climate Configuration
|
|
--------------------------
|
|
|
|
All climate platforms in ESPHome inherit from the climate configuration schema.
|
|
|
|
.. code-block:: yaml
|
|
|
|
climate:
|
|
- platform: ...
|
|
visual:
|
|
min_temperature: 18 °C
|
|
max_temperature: 25 °C
|
|
temperature_step: 0.1 °C
|
|
|
|
Configuration variables:
|
|
|
|
- **visual** (*Optional*): Visual settings for the climate device - these do not
|
|
affect operation and are solely for controlling how the climate device shows up in the
|
|
frontend.
|
|
|
|
- **min_temperature** (*Optional*, float): The minimum temperature the climate device can reach.
|
|
Used to set the range of the frontend gauge.
|
|
- **max_temperature** (*Optional*, float): The maximum temperature the climate device can reach.
|
|
Used to set the range of the frontend gauge.
|
|
- **temperature_step** (*Optional*, float): The granularity with which the target temperature
|
|
can be controlled.
|
|
|
|
Advanced options:
|
|
|
|
- **internal** (*Optional*, boolean): Mark this component as internal. Internal components will
|
|
not be exposed to the frontend (like Home Assistant). Only specifying an ``id`` without
|
|
a ``name`` will implicitly set this to true.
|
|
- If MQTT enabled, all other options from :ref:`MQTT Component <config-mqtt-component>`.
|
|
|
|
Climate Automation
|
|
------------------
|
|
|
|
.. _climate-control_action:
|
|
|
|
``climate.control`` Action
|
|
**************************
|
|
|
|
This is an :ref:`Action <config-action>` for setting parameters for climate devices.
|
|
|
|
.. code-block:: yaml
|
|
|
|
- climate.control:
|
|
id: my_climate
|
|
mode: AUTO
|
|
target_temperature: 25°C
|
|
|
|
Configuration variables:
|
|
|
|
- **id** (**Required**, :ref:`config-id`): The ID of the climate device to control.
|
|
- **mode** (*Optional*, string, :ref:`templatable <config-templatable>`): Put the climate device
|
|
in a specific mode. One of ``OFF``, ``AUTO``, ``COOL`` and ``HEAT``.
|
|
- **target_temperature** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
|
|
target temperature of a climate device.
|
|
- **target_temperature_low** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
|
|
lower target temperature of a climate device with a two-point target temperature.
|
|
- **target_temperature_high** (*Optional*, float, :ref:`templatable <config-templatable>`): Set the
|
|
higher target temperature of a climate device with a two-point target temperature.
|
|
- **away** (*Optional*, boolean, :ref:`templatable <config-templatable>`): Set the away mode
|
|
of the climate device.
|
|
|
|
.. _climate-lambda_calls:
|
|
|
|
lambda calls
|
|
************
|
|
|
|
From :ref:`lambdas <config-lambda>`, you can call several methods on all binary sensors to do some
|
|
advanced stuff.
|
|
|
|
- Attributes: All climate devices have read-only attributes to get the current state of the device.
|
|
|
|
.. code-block:: yaml
|
|
|
|
// Current mode, type: ClimateMode (enum)
|
|
id(my_climate).mode
|
|
// Current temperature, type: float (degrees)
|
|
id(my_climate).current_temperature
|
|
// Target temperature, type: float (degrees)
|
|
id(my_climate).target_temperature
|
|
// Lower Target temperature, type: float (degrees)
|
|
id(my_climate).target_temperature_low
|
|
// High Target temperature, type: float (degrees)
|
|
id(my_climate).target_temperature_high
|
|
// Away mode, type: bool
|
|
id(my_climate).away
|
|
|
|
- ``.make_call``: Control the climate device
|
|
|
|
.. code-block:: yaml
|
|
|
|
auto call = id(my_climate).make_call();
|
|
call.set_mode("OFF");
|
|
// etc. see API reference
|
|
call.perform();
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :apiref:`climate/climate.h`
|
|
- :ghedit:`Edit`
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
:glob:
|
|
|
|
*
|