mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-05 09:20:08 +01:00
345 lines
10 KiB
ReStructuredText
345 lines
10 KiB
ReStructuredText
Binary Sensor Component
|
|
=======================
|
|
|
|
.. seo::
|
|
:description: Information about the base representation of all binary sensors.
|
|
:image: folder-open.png
|
|
|
|
With ESPHome you can use different types of binary sensors. They will
|
|
automatically appear in the Home Assistant front-end and have several
|
|
configuration options.
|
|
|
|
|
|
.. _config-binary_sensor:
|
|
|
|
Base Binary Sensor Configuration
|
|
--------------------------------
|
|
|
|
All binary sensors have a platform and an optional device class. By
|
|
default, the binary will chose the appropriate device class itself, but
|
|
you can always override it.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: ...
|
|
device_class: motion
|
|
|
|
Configuration variables:
|
|
|
|
- **device_class** (*Optional*, string): The device class for the
|
|
sensor. See https://www.home-assistant.io/components/binary_sensor/
|
|
for a list of available options.
|
|
- **filters** (*Optional*, list): A list of filters to apply on the binary sensor values such as
|
|
inverting signals. See :ref:`binary_sensor-filters`.
|
|
|
|
Automations:
|
|
|
|
- **on_press** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when the button is pressed. See :ref:`binary_sensor-on_press`.
|
|
- **on_release** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when the button is released. See :ref:`binary_sensor-on_release`.
|
|
- **on_state** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when a state is published. See :ref:`binary_sensor-on_state`.
|
|
- **on_click** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when the button is held down for a specified period of time.
|
|
See :ref:`binary_sensor-on_click`.
|
|
- **on_double_click** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when the button is pressed twice for specified periods of time.
|
|
See :ref:`binary_sensor-on_double_click`.
|
|
- **on_multi_click** (*Optional*, :ref:`Automation <automation>`): An automation to perform
|
|
when the button is pressed in a specific sequence.
|
|
See :ref:`binary_sensor-on_multi_click`.
|
|
|
|
Advanced options:
|
|
|
|
- **internal** (*Optional*, boolean): Mark this component as internal. Internal components will
|
|
not be exposed to the frontend (like Home Assistant). Only specifying an ``id`` without
|
|
a ``name`` will implicitly set this to true.
|
|
- If MQTT enabled, all other options from :ref:`MQTT Component <config-mqtt-component>`.
|
|
|
|
.. _binary_sensor-filters:
|
|
|
|
Binary Sensor Filters
|
|
---------------------
|
|
|
|
With binary sensor filters you can customize how ESPHome handles your binary sensor values even more.
|
|
They are similar to :ref:`Sensor Filters <sensor-filters>`.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: ...
|
|
# ...
|
|
filters:
|
|
- invert:
|
|
- delayed_on: 100ms
|
|
- delayed_off: 100ms
|
|
- lambda: |-
|
|
if (id(other_binary_sensor).state) {
|
|
return x;
|
|
} else {
|
|
return {};
|
|
}
|
|
|
|
Supported filters:
|
|
|
|
- **invert**: Simple filter that just inverts every value from the binary sensor.
|
|
- **delayed_on**: When a signal ON is received, wait for the specified time period until publishing
|
|
an ON state. If an OFF value is received while waiting, the ON action is discarded. Or in other words:
|
|
Only send an ON value if the binary sensor has stayed ON for at least the specified time period.
|
|
**Useful for debouncing push buttons**.
|
|
- **delayed_off**: When a signal OFF is received, wait for the specified time period until publishing
|
|
an OFF state. If an ON value is received while waiting, the OFF action is discarded. Or in other words:
|
|
Only send an OFF value if the binary sensor has stayed OFF for at least the specified time period.
|
|
**Useful for debouncing push buttons**.
|
|
- **lambda**: Specify any :ref:`lambda <config-lambda>` for more complex filters. The input value from
|
|
the binary sensor is ``x`` and you can return ``true`` for ON, ``false`` for OFF, and ``{}`` to stop
|
|
the filter chain.
|
|
|
|
Binary Sensor Automation
|
|
------------------------
|
|
|
|
The triggers for binary sensors in ESPHome use the lingo from computer mouses.
|
|
For example, a ``press`` is triggered in the first moment when the button on your mouse is pushed down.
|
|
|
|
You can access the current state of the binary sensor in :ref:`lambdas <config-lambda>` using
|
|
``id(binary_sensor_id).state``.
|
|
|
|
.. _binary_sensor-on_press:
|
|
|
|
``on_press``
|
|
************
|
|
|
|
This automation will be triggered when the button is first pressed down, or in other words on the leading
|
|
edge of the signal.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_press:
|
|
then:
|
|
- switch.turn_on: relay_1
|
|
|
|
Configuration variables: See :ref:`Automation <automation>`.
|
|
|
|
.. _binary_sensor-on_release:
|
|
|
|
``on_release``
|
|
**************
|
|
|
|
This automation will be triggered when a button press ends, or in other words on the falling
|
|
edge of the signal.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_release:
|
|
then:
|
|
- switch.turn_off: relay_1
|
|
|
|
Configuration variables: See :ref:`Automation <automation>`.
|
|
|
|
.. _binary_sensor-on_state:
|
|
|
|
``on_state``
|
|
************
|
|
|
|
This automation will be triggered when a new state is received (and thus combines ``on_press``
|
|
and ``on_release`` into one trigger). The new state will be given as the variable ``x`` as a boolean
|
|
and can be used in :ref:`lambdas <config-lambda>`.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_state:
|
|
then:
|
|
- switch.turn_off: relay_1
|
|
|
|
Configuration variables: See :ref:`Automation <automation>`.
|
|
|
|
.. _binary_sensor-on_click:
|
|
|
|
``on_click``
|
|
************
|
|
|
|
This automation will be triggered when a button is pressed down for a time period of length
|
|
``min_length`` to ``max_length``. Any click longer or shorter than this will not trigger the automation.
|
|
The automation is therefore also triggered on the falling edge of the signal.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_click:
|
|
min_length: 50ms
|
|
max_length: 350ms
|
|
then:
|
|
- switch.turn_off: relay_1
|
|
|
|
Configuration variables:
|
|
|
|
- **min_length** (*Optional*, :ref:`config-time`): The minimum duration the click should last. Defaults to ``50ms``.
|
|
- **max_length** (*Optional*, :ref:`config-time`): The maximum duration the click should last. Defaults to ``350ms``.
|
|
- See :ref:`Automation <automation>`.
|
|
|
|
.. _binary_sensor-on_double_click:
|
|
|
|
``on_double_click``
|
|
*******************
|
|
|
|
This automation will be triggered when a button is pressed down twice, with the first click lasting between
|
|
``min_length`` and ``max_length``. When a second leading edge then happens within ``min_length`` and
|
|
``max_length``, the automation is triggered.
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_double_click:
|
|
min_length: 50ms
|
|
max_length: 350ms
|
|
then:
|
|
- switch.turn_off: relay_1
|
|
|
|
Configuration variables:
|
|
|
|
- **min_length** (*Optional*, :ref:`config-time`): The minimum duration the click should last. Defaults to ``50ms``.
|
|
- **max_length** (*Optional*, :ref:`config-time`): The maximum duration the click should last. Defaults to ``350ms``.
|
|
- See :ref:`Automation <automation>`.
|
|
|
|
.. _binary_sensor-on_multi_click:
|
|
|
|
``on_multi_click``
|
|
******************
|
|
|
|
This automation will be triggered when a button is pressed in a user-specified sequence.
|
|
|
|
|
|
.. code-block:: yaml
|
|
|
|
binary_sensor:
|
|
- platform: gpio
|
|
# ...
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at most 1s
|
|
- ON for 0.5s to 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- logger.log: "Double-Clicked"
|
|
|
|
Configuration variables:
|
|
|
|
- **timing** (**Required**): The timing of the multi click. This uses a language-based grammar using
|
|
these styles:
|
|
|
|
- ``<ON/OFF> for <TIME> to <TIME>``
|
|
- ``<ON/OFF> for at least <TIME>``
|
|
- ``<ON/OFF> for at most <TIME>``
|
|
|
|
- **invalid_cooldown** (*Optional*, :ref:`config-time`): If a multi click is started, but the timing
|
|
set in ``timing`` does not match, a "cool down" period will be activated during which no timing
|
|
will be matched. Defaults to ``1s``.
|
|
- See :ref:`Automation <automation>`.
|
|
|
|
.. note::
|
|
|
|
Getting the timing right for your use-case can sometimes be a bit difficult. If you set the
|
|
:ref:`global log level <logger-log_levels>` to ``VERBOSE``, the multi click trigger shows logs
|
|
about what stopped the trigger from happening.
|
|
|
|
You can use an ``OFF`` timing at the end of the timing sequence to differentiate between different
|
|
kinds of presses. For example the configuration below will differentiate between double, long and short
|
|
presses.
|
|
|
|
.. code-block:: yaml
|
|
|
|
on_multi_click:
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at most 1s
|
|
- ON for at most 1s
|
|
- OFF for at least 0.2s
|
|
then:
|
|
- logger.log: "Double Clicked"
|
|
- timing:
|
|
- ON for 1s to 2s
|
|
- OFF for at least 0.5s
|
|
then:
|
|
- logger.log: "Single Long Clicked"
|
|
- timing:
|
|
- ON for at most 1s
|
|
- OFF for at least 0.5s
|
|
then:
|
|
- logger.log: "Single Short Clicked"
|
|
|
|
.. _binary_sensor-is_on_condition:
|
|
.. _binary_sensor-is_off_condition:
|
|
|
|
``binary_sensor.is_on`` / ``binary_sensor.is_off`` Condition
|
|
************************************************************
|
|
|
|
This :ref:`Condition <config-condition>` checks if the given binary sensor is ON (or OFF).
|
|
|
|
.. code-block:: yaml
|
|
|
|
# In some trigger:
|
|
on_...:
|
|
if:
|
|
condition:
|
|
# Same syntax for is_off
|
|
binary_sensor.is_on: my_binary_sensor
|
|
|
|
.. _binary_sensor-lambda_calls:
|
|
|
|
lambda calls
|
|
************
|
|
|
|
From :ref:`lambdas <config-lambda>`, you can call several methods on all binary sensors to do some
|
|
advanced stuff.
|
|
|
|
- ``publish_state()``: Manually cause the binary sensor to publish and store a state from anywhere
|
|
in the program.
|
|
|
|
.. code-block:: yaml
|
|
|
|
// Within lambda, publish an OFF state.
|
|
id(my_binary_sensor).publish_state(false);
|
|
|
|
// Within lambda, publish an ON state.
|
|
id(my_binary_sensor).publish_state(true);
|
|
|
|
- ``.state``: Retrieve the current state of the binary sensor.
|
|
|
|
.. code-block:: yaml
|
|
|
|
// Within lambda, get the binary sensor state and conditionally do something
|
|
if (id(my_binary_sensor).state) {
|
|
// Binary sensor is ON, do something here
|
|
} else {
|
|
// Binary sensor is OFF, do something else here
|
|
}
|
|
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :apiref:`binary_sensor/binary_sensor.h`
|
|
- :ghedit:`Edit`
|
|
|
|
.. toctree::
|
|
:maxdepth: 1
|
|
:glob:
|
|
|
|
*
|