mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-14 10:35:27 +01:00
98 lines
3.3 KiB
ReStructuredText
98 lines
3.3 KiB
ReStructuredText
.. _hmc5883l:
|
|
|
|
HMC5883L Magnetometer
|
|
=====================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up HMC5883L IMU compass sensors.
|
|
:image: hmc5883l.jpg
|
|
:keywords: HMC5883L
|
|
|
|
The ``hmc5883l`` allows you to use your HMC5883L triple-axis magnetometers
|
|
(`datasheet <https://cdn-shop.adafruit.com/datasheets/HMC5883L_3-Axis_Digital_Compass_IC.pdf>`__,
|
|
`Adafruit`_) with ESPHome. The :ref:`I²C Bus <i2c>` is required to be set up in your configuration
|
|
for this sensor to work.
|
|
|
|
.. figure:: ../../images/hmc5883l.jpg
|
|
:align: center
|
|
:width: 30.0%
|
|
|
|
HMC5883L Magnetometer.
|
|
|
|
.. _Adafruit: https://www.adafruit.com/product/1746
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
sensor:
|
|
- platform: hmc5883l
|
|
address: 0x1E
|
|
field_strength_x:
|
|
name: "HMC5883L Field Strength X"
|
|
field_strength_y:
|
|
name: "HMC5883L Field Strength Y"
|
|
field_strength_z:
|
|
name: "HMC5883L Field Strength Z"
|
|
heading:
|
|
name: "HMC5883L Heading"
|
|
oversampling: 1x
|
|
range: 130uT
|
|
update_interval: 60s
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x1E``.
|
|
- **field_strength_x** (*Optional*): The field strength in microtesla along the X-Axis. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **field_strength_y** (*Optional*): The field strength in microtesla along the Y-Axis. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **field_strength_z** (*Optional*): The field strength in microtesla along the Z-Axis. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **heading** (*Optional*): The heading of the sensor in degrees. All options from
|
|
:ref:`Sensor <config-sensor>`.
|
|
- **oversampling** (*Optional*): The oversampling parameter for the sensor.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
|
|
- **oversampling** (*Optional*): Number of readings to average over for each sample. One of ``1x``, ``2x``,
|
|
``4x``, ``8x``. Defaults to ``1x``.
|
|
- **range** (*Optional*): Select a range / gain preset. This does not affect the scale of the values published
|
|
but allows one to avoid overflows at the cost of reading resolution. Supported values are 88µT, 130µT, 190µT,
|
|
250µT, 400µT, 470µT, 560µT, 810µT. Default range is ±130µT.
|
|
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
|
|
Oversampling Options
|
|
--------------------
|
|
|
|
By default, the HMC5883L sensor measures each value 1 times when requesting a new value. You can, however,
|
|
configure this amount. The result is the sensor will take the adverage of the x samples. Possible oversampling values:
|
|
|
|
- ``1x`` (default)
|
|
- ``2x``
|
|
- ``4x``
|
|
- ``8x``
|
|
|
|
Range Options
|
|
-------------
|
|
|
|
By default, the HMC5883L sensor measurement range is 130uT. You can, however,
|
|
configure this amount. Possible values:
|
|
|
|
- ``88uT``
|
|
- ``130uT`` (default)
|
|
- ``190uT``
|
|
- ``250uT``
|
|
- ``400uT``
|
|
- ``470uT``
|
|
- ``560uT``
|
|
- ``810uT``
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :ref:`sensor-filters`
|
|
- :doc:`template`
|
|
- :apiref:`hmc5883l/hmc5883l.h`
|
|
- `HMC5883L Library <https://github.com/jarzebski/Arduino-HMC5883L>`__ by `Korneliusz Jarzębski <https://github.com/jarzebski>`__
|
|
- :ghedit:`Edit`
|