esphome-docs/components/display/inkplate6.rst

282 lines
8.4 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Inkplate 6 and Inkplate 10
==========================
.. seo::
:description: Instructions for setting up Inkplate E-Paper displays in ESPHome.
:image: inkplate6.jpg
All-in-one e-paper display ``Inkplate 6`` and ``Inkplate 10``.
The Inkplate 6 and Inkplate 10 are powerful, Wi-Fi enabled ESP32 based six-inch e-paper displays recycled from a Kindle e-reader. Its main feature is simplicity.
Learn more at `Inkplate's website <https://inkplate.io/>`__
.. figure:: images/inkplate6.jpg
:align: center
:width: 75.0%
Inkplate 6
.. code-block:: yaml
# Example minimal configuration entry
mcp23017:
- id: mcp23017_hub
address: 0x20
display:
- platform: inkplate6
id: inkplate_display
greyscale: false
partial_updating: false
update_interval: 60s
model: inkplate_6
ckv_pin: 32
sph_pin: 33
gmod_pin:
mcp23xxx: mcp23017_hub
number: 1
gpio0_enable_pin:
mcp23xxx: mcp23017_hub
number: 8
oe_pin:
mcp23xxx: mcp23017_hub
number: 0
spv_pin:
mcp23xxx: mcp23017_hub
number: 2
powerup_pin:
mcp23xxx: mcp23017_hub
number: 4
wakeup_pin:
mcp23xxx: mcp23017_hub
number: 3
vcom_pin:
mcp23xxx: mcp23017_hub
number: 5
.. warning::
When using the Inkplate epaper module, the GPIO pin numbers above *cannot be changed* as they are
hardwired within the module/PCB.
.. warning::
Inkplate module cannot perform partial update if 3 bit mode is on.
It just ignores the function call in that case.
Configuration variables:
************************
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- **model** (*Optional*, enum): Specify the model ``inkplate_6`` or ``inkplate_10``. Defaults to ``inkplate_6``.
- **greyscale** (*Optional*, boolean): Makes the screen display 3 bit colors. Defaults to ``false``
- **partial_updating** (*Optional*, boolean): Makes the screen update partially, which is faster, but leaves burnin. Defaults to ``false``
- **full_update_every** (*Optional*, int): When partial updating is enabled, forces a full screen update after chosen number of updates. Defaults to ``10``
- **lambda** (*Optional*, :ref:`lambda <config-lambda>`): The lambda to use for rendering the content on the display.
See :ref:`display-engine` for more information.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to re-draw the screen. Defaults to ``5s``.
- **pages** (*Optional*, list): Show pages instead of a single lambda. See :ref:`display-pages`.
- **ckv_pin** (**Required**, :ref:`config-pin`): The CKV pin for the Inkplate display.
- **gmod_pin** (**Required**, :ref:`config-pin`): The GMOD pin for the Inkplate display.
- **gpio0_enable_pin** (**Required**, :ref:`config-pin`): The GPIO0 Enable pin for the Inkplate display.
- **oe_pin** (**Required**, :ref:`config-pin`): The OE pin for the Inkplate display.
- **powerup_pin** (**Required**, :ref:`config-pin`): The Powerup pin for the Inkplate display.
- **sph_pin** (**Required**, :ref:`config-pin`): The SPH pin for the Inkplate display.
- **spv_pin** (**Required**, :ref:`config-pin`): The SPV pin for the Inkplate display.
- **vcom_pin** (**Required**, :ref:`config-pin`): The VCOM pin for the Inkplate display.
- **cl_pin** (*Optional*, :ref:`config-pin`): The CL pin for the Inkplate display.
Defaults to GPIO0.
- **le_pin** (*Optional*, :ref:`config-pin`): The LE pin for the Inkplate display.
Defaults to GPIO2.
- **display_data_0_pin** (*Optional*, :ref:`config-pin`): The Data 0 pin for the Inkplate display.
Defaults to GPIO4.
- **display_data_1_pin** (*Optional*, :ref:`config-pin`): The Data 1 pin for the Inkplate display.
Defaults to GPIO5.
- **display_data_2_pin** (*Optional*, :ref:`config-pin`): The Data 2 pin for the Inkplate display.
Defaults to GPIO18.
- **display_data_3_pin** (*Optional*, :ref:`config-pin`): The Data 3 pin for the Inkplate display.
Defaults to GPIO19.
- **display_data_4_pin** (*Optional*, :ref:`config-pin`): The Data 4 pin for the Inkplate display.
Defaults to GPIO23.
- **display_data_5_pin** (*Optional*, :ref:`config-pin`): The Data 5 pin for the Inkplate display.
Defaults to GPIO25.
- **display_data_6_pin** (*Optional*, :ref:`config-pin`): The Data 6 pin for the Inkplate display.
Defaults to GPIO26.
- **display_data_7_pin** (*Optional*, :ref:`config-pin`): The Data 7 pin for the Inkplate display.
Defaults to GPIO27.
Complete example
****************
The following is a complete example YAML configuration that does a few things beyond the usual
Wi-Fi, API, and OTA configuration.
.. code-block:: yaml
# Example configuration entry
esphome:
name: inkplate
platform: ESP32
board: esp-wrover-kit
logger:
wifi:
ssid: <YOUR WIFI SSID>
password: <YOUR WIFI PASSWORD>
ap:
ssid: Inkplate-AP
password: '12345678'
captive_portal:
ota:
api:
switch:
- platform: restart
name: "Inkplate Reboot"
id: reboot
- platform: gpio
id: battery_read_mosfet
pin:
mcp23xxx: mcp23017_hub
number: 9
inverted: true
- platform: template
name: "Inkplate Greyscale mode"
lambda: return id(inkplate_display).get_greyscale();
turn_on_action:
- lambda: id(inkplate_display).set_greyscale(true);
turn_off_action:
- lambda: id(inkplate_display).set_greyscale(false);
- platform: template
name: "Inkplate Partial Updating"
lambda: return id(inkplate_display).get_partial_updating();
turn_on_action:
- lambda: id(inkplate_display).set_partial_updating(true);
turn_off_action:
- lambda: id(inkplate_display).set_partial_updating(false);
sensor:
- platform: adc
id: battery_voltage
update_interval: never
attenuation: 11db
pin: 35
- platform: template
name: "Inkplate Battery Voltage"
lambda: |-
id(battery_read_mosfet).turn_on();
delay(1);
float adc = id(battery_voltage).sample();
id(battery_read_mosfet).turn_off();
return adc;
filters:
- multiply: 2
i2c:
mcp23017:
- id: mcp23017_hub
address: 0x20
binary_sensor:
- platform: status
name: "Inkplate Status"
id: system_status
- platform: gpio
name: "Inkplate Touch Pad 1"
pin:
mcp23xxx: mcp23017_hub
number: 10
- platform: gpio
name: "Inkplate Touch Pad 2"
pin:
mcp23xxx: mcp23017_hub
number: 11
- platform: gpio
name: "Inkplate Touch Pad 3"
pin:
mcp23xxx: mcp23017_hub
number: 12
time:
- platform: sntp
id: esptime
font:
- file: "Helvetica.ttf"
id: helvetica_96
size: 96
- file: "Helvetica.ttf"
id: helvetica_48
size: 48
display:
- platform: inkplate6
id: inkplate_display
greyscale: false
partial_updating: false
update_interval: 60s
ckv_pin: 32
sph_pin: 33
gmod_pin:
mcp23xxx: mcp23017_hub
number: 1
gpio0_enable_pin:
mcp23xxx: mcp23017_hub
number: 8
oe_pin:
mcp23xxx: mcp23017_hub
number: 0
spv_pin:
mcp23xxx: mcp23017_hub
number: 2
powerup_pin:
mcp23xxx: mcp23017_hub
number: 4
wakeup_pin:
mcp23xxx: mcp23017_hub
number: 3
vcom_pin:
mcp23xxx: mcp23017_hub
number: 5
lambda: |-
it.fill(COLOR_ON);
it.print(100, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_LEFT, "ESPHome");
it.strftime(400, 300, id(helvetica_48), COLOR_OFF, TextAlign::CENTER, "%Y-%m-%d", id(esptime).now());
it.strftime(400, 400, id(helvetica_96), COLOR_OFF, TextAlign::CENTER, "%H:%M", id(esptime).now());
if (id(system_status).state) {
it.print(700, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_RIGHT, "Online");
} else {
it.print(700, 100, id(helvetica_48), COLOR_OFF, TextAlign::TOP_RIGHT, "Offline");
}
See Also
--------
- :doc:`index`
- `Arduino Inkplate 6 library <https://github.com/e-radionicacom/Inkplate-6-Arduino-library>`__ by `E-radionica.com <https://e-radionica.com/>`__
- :ghedit:`Edit`