esphome-docs/components/i2c.rst
Otto Winter 8d9b0d2375
Netlify (#153)
* Netlify

* Fix

* Faster doxygen

* Update Makefile

* Try without api

* Debug

* Fix

* Update Makefile

* Debug

* Try 1.8.13

* Remove debug

* Update Makefile

* Optimize
2019-02-07 13:54:45 +01:00

49 lines
1.6 KiB
ReStructuredText

.. _i2c:
I²C Bus
=======
.. seo::
:description: Instructions for setting up the i2c bus to communicate with 2-wire devices in esphomelib
:image: i2c.png
:keywords: i2c, iic, bus
This component sets up the i²c bus for your ESP32 or ESP8266. In order for those components
to work correctly, you need to define the i²c bus in your configuration. Please note the ESP
will enable its internal 10kΩ pullup resistors for these pins, so you usually don't need to
put on external ones.
.. code-block:: yaml
# Example configuration entry
i2c:
sda: 21
scl: 22
scan: False
Configuration variables:
------------------------
- **sda** (*Optional*, :ref:`config-pin`): The pin for the data line of the i²c bus.
Defaults to the default of your board (usually GPIO21 for ESP32 and GPIO4 for ESP8266).
- **scl** (*Optional*, :ref:`config-pin`): The pin for the clock line of the i²c bus.
Defaults to the default of your board (usually GPIO22 for ESP32 and
GPIO5 for ESP8266).
- **scan** (*Optional*, boolean): If esphomelib should do a search of the i2c address space on startup.
Note that this can slow down startup and is only recommended for when setting up new sensors. Defaults to
``False``.
- **frequency** (*Optional*, float): Set the frequency the i²c bus should operate on.
.. note::
If you're using the ESP32 and i2c frequently is showing errors in the logs, try with the latest
version of the Arduino framework. See :ref:`esphomeyaml-arduino_version` for information on how to do this.
See Also
--------
- :apiref:`i2c_component.h`
- :ghedit:`Edit`
.. disqus::