esphome-docs/cookbook/ilonda-wifi-smart-fish-feeder.rst
pplucky 76b0ff32b8
New cookbook entry for Ilonda Wifi Smart Fish Feeder (L88) (#1141)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-26 22:23:23 +12:00

103 lines
2.8 KiB
ReStructuredText

Ilonda Wifi Smart Fish Feeder (L88)
===================================
Ilonda Wifi Smart Fish Feeder (L88) is a Tuya-based device sold by Amazon (not only under Ilonda, but also under other brand names).
.. figure:: images/ilonda-wifi-smart-fish-feeder.jpg
:align: center
:width: 50.0%
Originally intended to be used with its companion app, once flashed using `tuya-convert <https://github.com/ct-Open-Source/tuya-convert>`__, ESPHome generated
firmware can be uploaded allowing you to control the Wifi Smart Fish Feeder via Home Assistant.
Wifi Smart Fish Feeder Configuration
------------------------------------
Thanks to the amazing `Tasmota template <https://templates.blakadder.com/ilonda_L88.html>`__,
managed to build a fully working esphome configuration. This assumes you have a secret.yaml with ssid and password keys.
.. code-block:: yaml
esphome:
name: wifi_smart_fish_feeder
platform: ESP8266
board: esp01_1m
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
logger:
api:
ota:
# Binary Sensor to allow relay to be switched when physical button is pressed
binary_sensor:
- platform: gpio
id: button
pin:
number: GPIO4
mode: INPUT_PULLUP
inverted: True
name: 'Switch feeder'
on_press:
- switch.turn_on: relay
- platform: status
name: "Status"
switch:
# Switch to turn feeder on for 3 seconds/off and turn on/off LED
- platform: gpio
name: 'Relay feeder'
id: relay
pin: GPIO14
on_turn_on:
- light.turn_on: led
- delay: 3s
- switch.turn_off: relay
- light.turn_off: led
restore_mode: ALWAYS_OFF
sensor:
# Feeder counter
- platform: pulse_meter
pin: GPIO12
name: 'Counter/min'
unit_of_measurement: 'time(s)'
internal: true
total:
unit_of_measurement: 'time(s)'
name: 'Counter feeder'
# To allow led to be controlled via GPIO
output:
- platform: esp8266_pwm
id: blue_led
pin:
number: GPIO5
inverted: true
# LED control
light:
- platform: monochromatic
output: blue_led
id: led
You can now add your Wifi Smart Fish Feeder to Home Assistant via the configurations page, look for 'ESPHome' under the Integrations option and click 'Configure'.
See Also
--------
- :doc:`/components/binary_sensor/gpio`
- :doc:`/components/switch/gpio`
- :doc:`/components/sensor/pulse_meter`
- :doc:`/components/output/esp8266_pwm`
- :doc:`/components/light/monochromatic`
- :doc:`/guides/automations`
- `Fish Feeder diagrams and pictures <https://community.openhab.org/t/ilonda-fish-feeder-openhab/99190>`__.
- :ghedit:`Edit`