mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-25 17:17:54 +01:00
235 lines
9.6 KiB
ReStructuredText
235 lines
9.6 KiB
ReStructuredText
Zemismart LED RGBW/RGBWW Downlights
|
|
===================================
|
|
|
|
The Zemismart LED RGBW Downlight is a Tuya-based downlight available from various retailers online or from `zemismart.com <https://www.zemismart.com>`__ direct.
|
|
|
|
.. figure:: images/zemismart-rgbw-downlight.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
Originally intended to be used with their companion app once flashed using `tuya-convert <https://github.com/ct-Open-Source/tuya-convert>`__ ESPHome generated
|
|
firmware can be uploaded allowing you to control the smart plugs via Home Assistant.
|
|
|
|
1. Create the ESPHome Firmware
|
|
------------------------------
|
|
|
|
#. Refer to either :doc:`/guides/getting_started_command_line` or :doc:`/guides/getting_started_hassio` before moving onto the next step.
|
|
#. Select a plug configuration below based on the plug/s you have and copy all of the text in the code block and paste into your
|
|
``name_of_esphome_configuration.yaml`` file.
|
|
#. Compile the firmware, again depending on your chosen setup refer to the guides in the first point.
|
|
|
|
2. Flashing
|
|
-----------
|
|
|
|
2.1 Prerequisites
|
|
*****************
|
|
|
|
#. Before you begin you'll need one of the following Linux machines running the latest copy of `Raspbian Stretch Lite
|
|
<https://www.raspberrypi.org/downloads/raspbian/>`__
|
|
|
|
a. Raspberry Pi 2B/B+ with `USB WiFi Dongle <https://www.raspberrypi.org/products/raspberry-pi-usb-wifi-dongle/>`__.
|
|
b. Raspberry Pi 3B/B+.
|
|
|
|
.. note::
|
|
|
|
As per the `tuya-convert documentation <https://github.com/ct-Open-Source/tuya-convert/blob/master/README.md#requirements>`__:
|
|
|
|
Any Linux with a Wifi adapter which can act as an Access Point should also work. Please note that we have tested the Raspberry Pi with clean installations
|
|
only. If you use your Raspberry Pi for anything else, we recommend using another SD card with a clean installation.
|
|
|
|
#. A microSD card (minimum 2GB, 8GB+ recommended).
|
|
#. Any WiFi device which can connect to the SSID generated by the Raspberry Pi and eventually the flashed Tuya device. **This cannot be an iOS / Apple device.
|
|
Android devices will work.**
|
|
|
|
2.2 Installing the OS
|
|
*********************
|
|
|
|
#. It's recommended to read the documentation provided by the Raspberry Pi Foundation on the best way to flash the OS to the microSD card depending on your
|
|
platform - `Installing operating system images <https://www.raspberrypi.org/documentation/installation/installing-images/>`__.
|
|
#. After you've flashed the microSD card browse to the "boot" partition and add a blank file called "ssh" **(without any extension)** which will enable the
|
|
SSH server upon first boot, extended information on this step can be found `here
|
|
<https://www.raspberrypi.org/documentation/remote-access/ssh/README.md#3-enable-ssh-on-a-headless-raspberry-pi-add-file-to-sd-card-on-another-machine>`__.
|
|
#. Plug the microSD card into the Raspberry Pi, connect network cable and power, the Raspberry Pi will start to boot.
|
|
|
|
2.3 Connecting to the Pi via SSH
|
|
********************************
|
|
|
|
#. Download and install `Putty <https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html>`__.
|
|
#. Open Putty.
|
|
#. Enter the IP of Raspberry Pi in the box that says "Host Name", leaving the port set to 22 (default for SSH). A list of recommended ways can be found `here
|
|
<https://www.raspberrypi.org/documentation/remote-access/ip-address.md>`__, but the easiest is to download and use `Fing <https://www.fing.com/>`__
|
|
(`Android <https://play.google.com/store/apps/details?id=com.overlook.android.fing&hl=en_GB>`__ / `iOS
|
|
<https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8>`__).
|
|
#. In the "Saved Sessions" input box, name the Raspberry Pi connection and then press "Save".
|
|
#. Select your new saved session from the list.
|
|
#. Press "Open".
|
|
|
|
2.4 Configuring the Pi
|
|
**********************
|
|
|
|
#. In the putty window login with the **pi** as the user and **raspberry** for the password.
|
|
#. Type ``sudo apt-get update && sudo apt-get dist-upgrade -y`` and wait for the upgrades to install.
|
|
#. Type ``sudo apt-get install git`` and wait for it to install.
|
|
|
|
2.5 Setup and Install tuya-convert
|
|
**********************************
|
|
|
|
#. In the putty window type ``git clone https://github.com/ct-Open-Source/tuya-convert`` press enter and wait while the repository is cloned.
|
|
#. Type ``cd tuya-convert`` and press enter.
|
|
#. Type ``./install_prereq.sh`` press enter and wait as the script gathers all the required components needed to function.
|
|
|
|
2.6 Upload ESPHome Firmware using SFTP
|
|
**************************************
|
|
|
|
#. Download `FileZilla <https://filezilla-project.org/download.php?type=client>`__ or `WinSCP <https://winscp.net/eng/index.php>`__ or use your preferred FTP
|
|
client.
|
|
#. Depending on the program you need to connect to the Pi using the IP address as the hostname and the username and password the same as you used to connect
|
|
via SSH and ensure your connection type is set to **SFTP**
|
|
#. Browse to ``/root/tuya-convert/files``.
|
|
#. Upload your compiled ``firmware.bin`` file to this directory. For command line based installs you can access the file under
|
|
``<CONFIG_DIR>/<NODE_NAME>/.pioenvs/<NODE_NAME>/firmware.bin`` alternatively Home Assistant add-on users can download the file directly from the web UI.
|
|
|
|
2.7 Use tuya-convert to install ESPHome Firmware
|
|
************************************************
|
|
|
|
#. Type ``./start_flash.sh``
|
|
#. Type ``yes`` to accept the warning.
|
|
#. Connect your alternative WiFi device (non iOS / Apple based) to the ``vtrust-flash`` SSID using ``flashmeifyoucan`` as the password. This is the network
|
|
being broadcast by the Pi from the Tuya flash script.
|
|
#. If you haven't already plug your downlight into a power point and turn it on and follow the instructions below:
|
|
|
|
#. Once turned on a stable white light will be emitted.
|
|
#. Switch off, then back on **3** times ensuring each off-on cycle is no longer 10 seconds apart and between each the light visibly turns off.
|
|
#. The light should have entered into a fast flashing state, if this is the case continue onto **Step 5** below. *Otherwise please turn the downlight off-on
|
|
within 3 minutes which will restore it back to a stable white light.*
|
|
|
|
|
|
#. Press enter on your putty window to start the flash process and wait. If the connection is successful you should see a large amount of scrolling text, this
|
|
is the script backing up the factory shipped firmware.
|
|
#. Once the process is complete you can type ``curl http://10.42.42.42/flashURL?url=http://10.42.42.1/files/firmware.bin``
|
|
#. The plug will restart and if everything is working correctly after a few seconds you should be able to press the button triggering the relay and turning the
|
|
blue led on.
|
|
|
|
3. Downlight Configuration
|
|
--------------------------
|
|
|
|
Thanks to `@1972rx2 <https://community.home-assistant.io/u/1972rx2>`__ for creating the below ESPHome configuration
|
|
which this cookbook article by `@cryptelli <https://community.home-assistant.io/u/cryptelli>`__ is based on.
|
|
|
|
Depending on the type of your light you either need a config using my9231 driver (RGBW) or 5 PWM channels (RGBWW).
|
|
|
|
3.1 Zemismart LED RGBW Downlight YAML
|
|
*************************************
|
|
|
|
.. code-block:: yaml
|
|
|
|
esphome:
|
|
name: downlight01
|
|
|
|
esp8266:
|
|
board: esp01_1m
|
|
|
|
wifi:
|
|
ssid: !secret wifi_ssid
|
|
password: !secret wifi_password
|
|
|
|
# Enable logging
|
|
logger:
|
|
|
|
# Enable Home Assistant API
|
|
api:
|
|
|
|
ota:
|
|
|
|
my9231:
|
|
data_pin: GPIO13
|
|
clock_pin: GPIO15
|
|
num_channels: 4
|
|
num_chips: 1
|
|
|
|
output:
|
|
- platform: my9231
|
|
id: output_blue
|
|
channel: 1
|
|
- platform: my9231
|
|
id: output_red
|
|
channel: 3
|
|
- platform: my9231
|
|
id: output_green
|
|
channel: 2
|
|
- platform: my9231
|
|
id: output_white
|
|
channel: 0
|
|
|
|
light:
|
|
- platform: rgbw
|
|
name: Downlight01
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
white: output_white
|
|
|
|
3.2. Zemismart LED RGBWw Downlight YAML
|
|
***************************************
|
|
|
|
Known devices: *Zemismart 2,5 zoll WiFi RGBW Led Downlight 7w*
|
|
|
|
.. code-block:: yaml
|
|
|
|
output:
|
|
- platform: esp8266_pwm
|
|
pin: 14
|
|
id: output_blue
|
|
- platform: esp8266_pwm
|
|
pin: 12
|
|
id: output_green
|
|
- platform: esp8266_pwm
|
|
pin: 4
|
|
id: output_red
|
|
- platform: esp8266_pwm
|
|
pin: 5
|
|
id: output_coldwhite
|
|
- platform: esp8266_pwm
|
|
pin: 13
|
|
id: output_warmwhite
|
|
|
|
light:
|
|
- platform: rgbww
|
|
name: '${device_name} Light'
|
|
default_transition_length: 0s
|
|
red: output_red
|
|
green: output_green
|
|
blue: output_blue
|
|
cold_white: output_coldwhite
|
|
warm_white: output_warmwhite
|
|
cold_white_color_temperature: 6500 K
|
|
warm_white_color_temperature: 2700 K
|
|
|
|
4. Adding to Home Assistant
|
|
---------------------------
|
|
|
|
You can now add your downlight to Home Assistant using the below instructions:
|
|
|
|
#. In the left hand sidebar, select **Configuration**.
|
|
#. Select **Integrations**
|
|
#. Click the **Orange** plus button *(lower right hand corner)* and look for **ESPHome** in the list of available integrations and select.
|
|
#. Type the host of the downlight, in most cases this is simply the IP address.
|
|
#. Leave the port set to the default of ``6053``.
|
|
#. Click **Submit**
|
|
|
|
If you've gotten this far, congratulations! Below is the card you should see inside Home Assistant which allows you to control the downlight.
|
|
|
|
|
|
.. figure:: images/zemismart-rgbw-downlight-homeassistant.jpg
|
|
:align: center
|
|
:width: 50.0%
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/light/index`
|
|
- :doc:`/components/light/rgbw`
|
|
- :doc:`/components/output/index`
|
|
- :doc:`/components/output/my9231`
|
|
- :ghedit:`Edit`
|