mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-18 11:15:36 +01:00
122 lines
4.7 KiB
ReStructuredText
122 lines
4.7 KiB
ReStructuredText
Inkbird IBS-TH1, IBS-TH1 Mini, and IBS-TH2 BLE Sensor
|
|
=====================================================
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up Inkbird IBS-TH1/TH2 Bluetooth-based temperature and humidity sensors in ESPHome.
|
|
:image: inkbird_isbth1_mini.jpg
|
|
:keywords: Inkbird, BLE, Bluetooth, IBS-TH1, IBS-TH2
|
|
|
|
The ``inkbird_ibsth1_mini`` sensor platform lets you track the output of Inkbird IBS-TH1, IBS-TH1 Mini, and IBS-TH2 Bluetooth
|
|
Low Energy devices using the :doc:`/components/esp32_ble_tracker`. This component will track the
|
|
temperature, external temperature (non mini only), humidity and the battery level of the IBS-TH1 device every time the
|
|
sensor sends out a BLE broadcast. Note that contrary to other implementations, ESPHome can track as
|
|
many IBS-TH1/TH2 devices at once as you want.
|
|
|
|
.. note::
|
|
|
|
If an external temperature sensor is connected to the IBS-TH1, measurement from the internal sensor is not sent.
|
|
Only one sensor will work at a time.
|
|
|
|
.. note::
|
|
|
|
The external temperature sensor is not supported on the IBS-TH1 Mini or IBS-TH2
|
|
|
|
.. figure:: images/inkbird_isbth1_mini-full.jpg
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
Inkbird IBS-TH1 Mini Temperature and Humidity Sensor over BLE.
|
|
|
|
.. figure:: images/inkbird_isbth1_mini-ui.png
|
|
:align: center
|
|
:width: 80.0%
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
esp32_ble_tracker:
|
|
|
|
sensor:
|
|
- platform: inkbird_ibsth1_mini
|
|
mac_address: 38:81:D7:0A:9C:11
|
|
temperature:
|
|
name: "Inkbird IBS-TH1 Temperature"
|
|
external_temperature:
|
|
name: "Inkburd IBS-TH1 External Temperature"
|
|
humidity:
|
|
name: "Inkbird IBS-TH1 Humidity"
|
|
battery_level:
|
|
name: "Inkbird IBS-TH1 Battery Level"
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **mac_address** (**Required**, MAC Address): The MAC address of the Inkbird IBS-TH1 device.
|
|
- **temperature** (*Optional*): The information for the temperature sensor.
|
|
|
|
- **name** (**Required**, string): The name for the temperature sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **external_temperature** (*Optional*): The information for the external temperature sensor.
|
|
|
|
- **name** (**Required**, string): The name for the external temperature sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **humidity** (*Optional*): The information for the humidity sensor
|
|
|
|
- **name** (**Required**, string): The name for the humidity sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
- **battery_level** (*Optional*): The information for the battery level sensor
|
|
|
|
- **name** (**Required**, string): The name for the battery level sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
|
|
- All other options from :ref:`Sensor <config-sensor>`.
|
|
|
|
|
|
Setting Up Devices
|
|
------------------
|
|
|
|
To set up Inkbird IBS-TH1/TH2 devices you first need to find their MAC Address so that ESPHome can
|
|
identify them. So first, create a simple configuration without any ``inkbird_ibsth1_mini`` entries
|
|
like so:
|
|
|
|
.. code-block:: yaml
|
|
|
|
esp32_ble_tracker:
|
|
|
|
After uploading the ESP32 will immediately try to scan for BLE devices such as the Inkbird IBS-TH1/TH2.
|
|
When it detects these sensors, it will automatically parse the BLE message print a
|
|
message like this one:
|
|
|
|
.. code::
|
|
|
|
[13:36:43][D][esp32_ble_tracker:544]: Found device 38:81:D7:0A:9C:11 RSSI=-53
|
|
[13:36:43][D][esp32_ble_tracker:565]: Address Type: PUBLIC
|
|
[13:36:43][D][esp32_ble_tracker:567]: Name: 'sps'
|
|
|
|
Note that it can sometimes take some time for the first BLE broadcast to be received. Please note that address type
|
|
should say 'PUBLIC' and the device name should be 'sps', this is how you find the Inkbird IBS-TH1/TH2 among all the
|
|
other devices.
|
|
|
|
Then just copy the address (``38:81:D7:0A:9C:11``) into a new ``sensor.inkbird_ibsth1_mini`` platform
|
|
entry like in the configuration example at the top.
|
|
|
|
.. note::
|
|
|
|
The ESPHome Inkbird IBS-TH1/TH2 integration listens passively to packets the device sends by itself.
|
|
ESPHome therefore has no impact on the battery life of the device.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`/components/esp32_ble_tracker`
|
|
- :doc:`/components/sensor/index`
|
|
- :doc:`absolute_humidity`
|
|
- :apiref:`inkbird_ibsth1_mini/inkbird_ibsth1_mini.h`
|
|
- `OpenMQTTGateway <https://github.com/1technophile/OpenMQTTGateway>`__ by `@1technophile <https://github.com/1technophile>`__
|
|
- :ghedit:`Edit`
|