esphome-docs/components/sensor/pulse_counter.rst
Otto Winter f4c1d31a1d
Revert "Remove disqus"
This reverts commit 19a22e8b39.
2019-03-06 11:02:03 +01:00

81 lines
2.7 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Pulse Counter Sensor
====================
.. seo::
:description: Instructions for setting up pulse counter sensors.
:image: pulse.png
The pulse counter sensor allows you to count the number of pulses and the frequency of a signal
on any pin.
On the ESP32, this sensor is even highly accurate because it's using the hardware `pulse counter
peripheral <https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/pcnt.html>`__
on the ESP32.
.. figure:: images/pulse-counter.png
:align: center
:width: 80.0%
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: pulse_counter
pin: 12
name: "Pulse Counter"
Configuration variables:
------------------------
- **pin** (**Required**, :ref:`config-pin`): The pin to count pulses on.
- **name** (**Required**, string): The name of the sensor.
- **count_mode** (*Optional*): Configure how the counter should behave
on a detected rising edge/falling edge.
- **rising_edge** (*Optional*): What to do when a rising edge is
detected. One of ``DISABLE``, ``INCREMENT`` and ``DECREMENT``.
Defaults to ``INCREMENT``.
- **falling_edge** (*Optional*): What to do when a falling edge is
detected. One of ``DISABLE``, ``INCREMENT`` and ``DECREMENT``.
Defaults to ``DISABLE``.
- **internal_filter** (*Optional*, :ref:`config-time`): If a pulse shorter than this
time is detected, its discarded and no pulse is counted. Defaults to ``13us``. On the ESP32,
this value can not be higher than ``13us``, for the ESP8266 you can use larger intervals too.
If you enable this, set up the ``count_mode`` to increase on the falling edge, not leading edge.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Sensor <config-sensor>`.
Converting units
----------------
The sensor defaults to measuring its values using a unit of measurement
of “pulses/min”. You can change this by using :ref:`sensor-filters`.
For example, if youre using the pulse counter with a photodiode to
count the light pulses on a power meter, you can do the following:
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: pulse_counter
pin: 12
unit_of_measurement: 'kW'
name: 'Power Meter House'
filters:
- multiply: 0.06
See Also
--------
- :ref:`sensor-filters`
- :doc:`rotary_encoder`
- `esp-idf Pulse Counter API <https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/pcnt.html>`__.
- :apiref:`sensor/pulse_counter.h`
- :ghedit:`Edit`
.. disqus::