esphome-docs/components/sensor/mlx90393.rst
2022-02-08 20:42:16 +13:00

116 lines
3.7 KiB
ReStructuredText

MLX90393 Triple-axis Magnetometer
=================================
.. seo::
:description: Instructions for setting up MLX90393 Triple-Axis magnetometer sensor.
:image: mlx90393.jpg
:keywords: MLX90393
The ``mlx90393`` sensor platform allows you to use your MLX90393
(`datasheet <https://media.melexis.com/-/media/files/documents/datasheets/mlx90393-datasheet-melexis.pdf>`__,
`Adafruit`_) three axis magnetometer with ESPHome. The :ref:`I²C <i2c>` is required to be set up in
your configuration for this sensor to work.
.. figure:: images/mlx90393-full.jpg
:align: center
:width: 50.0%
MLX90393 Triple-axis Magnetometer
.. _Adafruit: https://www.adafruit.com/product/4022
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: mlx90393
id: mlx
x_axis:
name: "x"
y_axis:
name: "y"
z_axis:
name: "z"
Configuration variables:
------------------------
- **x_axis** (*Optional*): The information for the x-axis.
- **name** (**Required**, string): The name for the x-axis sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- **resolution** (*Optional*, int): Set resolution. Defaults to ``19BIT``. Must be one of:
- ``16BIT``
- ``17BIT``
- ``18BIT``
- ``19BIT``
- All other options from :ref:`Sensor <config-sensor>`.
- **y_axis** (*Optional*): The information for the y-axis.
- **name** (**Required**, string): The name for the y-axis sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- **resolution** (*Optional*, int): Set resolution. Defaults to ``19BIT``. Must be one of:
- ``16BIT``
- ``17BIT``
- ``18BIT``
- ``19BIT``
- All other options from :ref:`Sensor <config-sensor>`.
- **z_axis** (*Optional*): The information for the z-axis.
- **name** (**Required**, string): The name for the z-axis sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- **resolution** (*Optional*, int): Set resolution. Defaults to ``16BIT``. Must be one of:
- ``16BIT``
- ``17BIT``
- ``18BIT``
- ``19BIT``
- All other options from :ref:`Sensor <config-sensor>`.
- **temperature** (*Optional*): Built-in temperature sensor.
- **name** (**Required**, string): The name for the temperature sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- **oversampling** (*Optional*, int): On-chip oversampling for the temperature sensor. Defaults to `0`. Must be between `0` and `3`.
- All other options from :ref:`Sensor <config-sensor>`.
- **drdy_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): Data-ready pin. Often labelled ``INT``. Using this pin might lead to slightly quicker read times.
- **gain** (*Optional*, int): Specify the gain. Defaults to ``2_5X``. Must be one of
- ``1X``
- ``1_33X``
- ``1_67X``
- ``2X``
- ``2_5X``
- ``3X``
- ``4X``
- ``5X``
- **oversampling** (*Optional*, int): On-chip oversampling. Defaults to ``2``. Must be between ``0`` and ``3``.
- **filter** (*Optional*, int): On-chip digital filter. Defaults to ``6``. Must be between ``0`` and ``7``.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the
sensor. Defaults to ``60s``.
- **address** (*Optional*, int): Manually specify the I²C address of
the sensor. Defaults to ``0x0C``.
- **i2c_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`I²C Component <i2c>` if you want
to use multiple I²C buses.
See Also
--------
- :ref:`sensor-filters`
- `arduino-MLX90393 <https://github.com/functionpointer/arduino-MLX90393>`__
- :ghedit:`Edit`