mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-11-09 10:02:45 +01:00
220 lines
7.7 KiB
ReStructuredText
220 lines
7.7 KiB
ReStructuredText
RC522 NFC/RFID
|
|
==============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up RC522 NFC/RFID tag readers and tags in ESPHome
|
|
:image: rc522.jpg
|
|
:keywords: RC522, NFC, RFID
|
|
|
|
.. _rc522-component:
|
|
|
|
.. figure:: images/rc522-full.jpg
|
|
:align: center
|
|
:width: 60.0%
|
|
|
|
The ``rc522`` component allows you to use RC522 NFC/RFID controllers
|
|
(`datasheet <https://www.nxp.com/docs/en/data-sheet/MFRC522.pdf>`__, `Ali Express <https://es.aliexpress.com/item/1260729519.html>`__)
|
|
with ESPHome. ESPHome can read the UID from the tag. Every NFC/RFID tag has a unique "UID" value assigned at the time
|
|
of manufacture. Tags can be associated with binary sensors, making it easy to determine when a specific tag is present.
|
|
You can also use the tag information directly within ESPHome automations/lambdas. See :ref:`rc522-setting_up_tags` for
|
|
information on how to setup individual binary sensors using this component.
|
|
|
|
The RC522 IC supports SPI, I²C and UART communication protocols; ESPHome can use either SPI or I²C.
|
|
|
|
Component/Hub
|
|
-------------
|
|
|
|
- If you have a module as shown in the image above, it can only be used in SPI mode
|
|
(`unless hacked <https://forum.arduino.cc/index.php?topic=442750.0>`__) and you must define a :ref:`SPI bus <spi>`
|
|
in your configuration with both the **miso_pin** and **mosi_pin** set.
|
|
|
|
- If you have a RC522 which communicates via I²C (as on the M5 Stack), you need to have an :ref:`I²C <i2c>` bus configured.
|
|
|
|
Over SPI
|
|
--------
|
|
|
|
The ``rc522_spi`` component allows you to use RC522 NFC/RFID controllers with ESPHome. This component is a global hub
|
|
that establishes the connection to the RC522 via :ref:`SPI <spi>`. Using :ref:`RC522 binary sensors <rc522-binary_sensor>`,
|
|
you can then create individual binary sensors that track if an NFC/RFID tag is currently detected by the RC522.
|
|
|
|
.. code-block:: yaml
|
|
|
|
spi:
|
|
|
|
rc522_spi:
|
|
cs_pin: GPIO15
|
|
|
|
binary_sensor:
|
|
- platform: rc522
|
|
uid: 74-10-37-94
|
|
name: "RC522 RFID Tag"
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **cs_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin on the ESP that the chip select line
|
|
is connected to.
|
|
- **reset_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The pin connected to the RST line. Some tests
|
|
shows the RC522 working okay without this.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The duration of each scan on the RC522. This affects the
|
|
duration that the individual binary sensors stay active when they're found.
|
|
If a device is not found within this time window, it will be marked as not present. Defaults to ``1s``.
|
|
- **spi_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`SPI Component <spi>` if you want
|
|
to use multiple SPI buses.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID for this component.
|
|
- **on_tag** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a tag is read. See
|
|
:ref:`rc522-on_tag`.
|
|
- **on_tag_removed** (*Optional*, :ref:`Automation <automation>`): An automation to perform after a tag is removed. See
|
|
:ref:`rc522-on_tag_removed`.
|
|
|
|
Over I²C
|
|
--------
|
|
|
|
The ``rc522_i2c`` component allows you to use RC522 NFC/RFID controllers with ESPHome. This component is a global hub
|
|
that establishes the connection to the RC522 via :ref:`I²C <i2c>` (also available over SPI). Using the
|
|
:ref:`RC522 binary sensors <rc522-binary_sensor>` you can then create individual binary sensors that track if
|
|
an NFC/RFID tag is currently detected by the RC522.
|
|
|
|
.. code-block:: yaml
|
|
|
|
i2c:
|
|
|
|
rc522_i2c:
|
|
|
|
binary_sensor:
|
|
- platform: rc522
|
|
uid: 74-10-37-94
|
|
name: "RC522 RFID Tag"
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **address** (*Optional*, int): Manually specify the I²C address of the sensor. Defaults to ``0x28``.
|
|
- **reset_pin** (*Optional*, :ref:`Pin Schema <config-pin_schema>`): The pin connected to the RST line. Some tests
|
|
shows the RC522 working okay without this.
|
|
- **update_interval** (*Optional*, :ref:`config-time`): The duration of each scan on the RC522. This affects the
|
|
duration that the individual binary sensors stay active when they're found.
|
|
If a device is not found within this time window, it will be marked as not present. Defaults to ``1s``.
|
|
- **i2c_id** (*Optional*, :ref:`config-id`): Manually specify the ID of the :ref:`I²C Component <i2c>` if you want
|
|
to use multiple I²C buses.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID for this component.
|
|
- **on_tag** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a tag is read. See
|
|
:ref:`rc522-on_tag`.
|
|
- **on_tag_removed** (*Optional*, :ref:`Automation <automation>`): An automation to perform after a tag is removed. See
|
|
:ref:`rc522-on_tag_removed`.
|
|
|
|
Triggers
|
|
--------
|
|
|
|
.. _rc522-on_tag:
|
|
|
|
``on_tag`` Trigger
|
|
******************
|
|
|
|
This automation will be triggered immediately after the RC522 identifies a tag.
|
|
|
|
The parameter ``x`` this trigger provides is of type ``std::string`` and is the tag UID in the format
|
|
``74-10-37-94``. The configuration below will for example publish the tag ID on the MQTT topic ``rc522/tag``.
|
|
|
|
.. code-block:: yaml
|
|
|
|
rc522_spi: # or rc522_i2c
|
|
# ...
|
|
on_tag:
|
|
then:
|
|
- mqtt.publish:
|
|
topic: rc522/tag
|
|
payload: !lambda 'return x;'
|
|
|
|
A tag scanned event can also be sent to the Home Assistant tag component
|
|
using :ref:`api-homeassistant_tag_scanned_action`.
|
|
|
|
.. code-block:: yaml
|
|
|
|
rc522_spi: # or rc522_i2c
|
|
# ...
|
|
on_tag:
|
|
then:
|
|
- homeassistant.tag_scanned: !lambda 'return x;'
|
|
|
|
.. _rc522-on_tag_removed:
|
|
|
|
``on_tag_removed`` Trigger
|
|
**************************
|
|
|
|
This automation will be triggered when the RC522 no longer "sees" a previously scanned tag.
|
|
|
|
The parameter ``x`` this trigger provides is of type ``std::string`` and is the removed tag UID in the format
|
|
``74-10-37-94``. The example configuration below will publish the removed tag ID on the MQTT topic ``pn7160/tag_removed``.
|
|
|
|
.. code-block:: yaml
|
|
|
|
rc522_spi: # or rc522_i2c
|
|
# ...
|
|
on_tag_removed:
|
|
then:
|
|
- mqtt.publish:
|
|
topic: rc522/tag_removed
|
|
payload: !lambda 'return x;'
|
|
|
|
|
|
|
|
.. _rc522-binary_sensor:
|
|
|
|
``rc522`` Binary Sensor
|
|
-----------------------
|
|
|
|
The ``rc522`` binary sensor platform lets you track if an NFC/RFID tag with a given unique id (``uid``) is currently
|
|
being detected by the RC522 or not.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
spi:
|
|
clk_pin: D0
|
|
miso_pin: D1
|
|
mosi_pin: D2
|
|
|
|
rc522_spi: # or rc522_i2c
|
|
cs_pin: D3
|
|
update_interval: 1s
|
|
|
|
binary_sensor:
|
|
- platform: rc522
|
|
uid: 74-10-37-94
|
|
name: "RC522 RFID Tag"
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **uid** (**Required**, string): The unique ID of the NFC/RFID tag. This is a hyphen-separated list
|
|
of hexadecimal values. For example ``74-10-37-94``.
|
|
- **name** (**Required**, string): The name of the binary sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
|
|
|
|
.. _rc522-setting_up_tags:
|
|
|
|
Setting Up Tags
|
|
---------------
|
|
|
|
To set up binary sensors for specific NFC/RFID tags you first have to know their unique IDs. To obtain this
|
|
id, first set up a simple RC522 configuration without any binary sensors like above.
|
|
|
|
When your code is running and you approach the RC522 with an NFC/RFID Tag, you should see a message like this:
|
|
|
|
.. code::
|
|
|
|
Found new tag '74-10-37-94'
|
|
|
|
Then copy this id and create a ``binary_sensor`` entry as in the configuration example. Repeat this process for each tag.
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`rdm6300`
|
|
- :doc:`pn532`
|
|
- :apiref:`rc522/rc522.h`
|
|
- :ghedit:`Edit`
|