esphome-docs/components/sensor/mopeka_pro_check.rst

138 lines
4.4 KiB
ReStructuredText

Mopeka Pro Check BLE Sensor
===========================
.. seo::
:description: Instructions for setting up Mopeka Pro Check bluetooth-based sensors in ESPHome.
:image: mopeka_pro_check.jpg
:keywords: Mopeka, Mopeka Pro Check, Mopeka Pro Plus, BLE, Bluetooth
The ``mopeka_pro_check`` sensor platform lets you track the output of Mopeka
Pro Check LP and Mopeka Pro Plus Bluetooth Low Energy devices using the
:doc:`/components/esp32_ble_tracker`. This component will track the tank level,
distance, temperature, and battery percentage of a Mopeka Pro Check LP or Mopeka
Pro Plus Residential BLE device every time the sensor sends out a BLE broadcast.
.. warning::
This sensor component only supports the Mopeka Pro Check and Pro Plus devices.
The original Mopeka Check sensors are not supported.
.. figure:: images/mopeka_pro_check.jpg
:align: center
Mopeka Pro Check LP over BLE.
.. code-block:: yaml
esp32_ble_tracker:
sensor:
# Example using 20lb vertical propane tank.
- platform: mopeka_pro_check
mac_address: D3:75:F2:DC:16:91
tank_type: 20LB_V
temperature:
name: "Propane test temp"
level:
name: "Propane test level"
distance:
name: "Propane test distance"
battery_level:
name: "Propane test battery level"
# Custom example - user defined empty / full points
- platform: mopeka_pro_check
mac_address: D3:75:F2:DC:16:91
tank_type: CUSTOM
custom_distance_full: 40cm
custom_distance_empty: 10mm
temperature:
name: "Propane c test temp"
level:
name: "Propane c test level"
distance:
name: "Propane c test distance"
battery_level:
name: "Propane c test battery level"
Configuration variables:
------------------------
- **mac_address** (**Required**, MAC Address): The MAC address of the Mopeka
device.
- **tank_type** (**Required**): The tank type the sensor is measuring. See below.
- **custom_distance_full** (*Optional*): distance sensor will read when it should be
considered full (100%). This is only used when tank_type = CUSTOM
- **custom_distance_empty** (*Optional*): distance sensor will read when it should be
considered empty (0%). This is only used when tank_type = CUSTOM
- **level** (*Optional*): The percentage of full for the tank sensor
- All options from :ref:`Sensor <config-sensor>`.
- **distance** (*Optional*): The raw distance/depth of the liquid for the sensor in mm.
- All options from :ref:`Sensor <config-sensor>`.
- **temperature** (*Optional*): The information for the temperature sensor.
This temperature is on the sensor and is not calibrated to ambient temperature.
- All options from :ref:`Sensor <config-sensor>`.
- **battery_level** (*Optional*): The information for the battery percentage
sensor. Sensor uses a standard CR2032 battery.
- All options from :ref:`Sensor <config-sensor>`.
Tank Types
----------
Currently supported Tank types are:
- ``20LB_V`` - 20 LB vertical tank
- ``30LB_V`` - 30 LB vertical tank
- ``40LB_V`` - 40 LB vertical tank
- ``CUSTOM`` - Allows you to define your own full and empty points
Setting Up Devices
------------------
To set up Mopeka Pro Check / Pro Plus devices you first need to find their MAC Address so that
ESPHome can identify them. So first, create a simple configuration with the ``esp32_ble_tracker``
and the ``mopeka_ble`` component like so:
.. code-block:: yaml
esp32_ble_tracker:
mopeka_ble:
After uploading, the ESP32 will immediately try to scan for BLE devices. For Mopeka Pro
Check / Pro Plus devices you must press and hold the green sync button for it to be identified.
For all sensors found the ``mopeka_ble`` component will print a message like this one:
.. code::
[20:43:26][I][mopeka_ble:040]: SENSOR FOUND: D3:75:F2:DC:16:91
Then just copy the address (``D3:75:F2:DC:16:91``) into a new
``sensor.mopeka_pro_check`` platform entry like in the configuration example at the top.
.. note::
The ESPHome Mopeka Pro Check BLE integration listens passively to packets the Mopeka device sends by itself.
ESPHome therefore has no impact on the battery life of the device.
See Also
--------
- :doc:`/components/esp32_ble_tracker`
- :doc:`/components/sensor/index`
- :apiref:`mopeka_pro_check/mopeka_pro_check.h`
- `Mopeka <https://mopeka.com/product/mopeka-check-pro-lp-sensor/>`__
- :ghedit:`Edit`