esphome-docs/components/pcf8574.rst
2021-11-29 07:57:01 +13:00

78 lines
2.4 KiB
ReStructuredText

PCF8574 I/O Expander
====================
.. seo::
:description: Instructions for setting up PCF8574 digital port expanders in ESPHome.
:image: pcf8574.jpg
The PCF8574 component allows you to use PCF8574 or PCF8575 I/O expanders
(`datasheet <http://www.ti.com/lit/ds/symlink/pcf8574.pdf>`__,
`SparkFun`_) in ESPHome. It uses :ref:`I²C Bus <i2c>` for communication.
Once configured, you can use any of the 8 pins (PCF8574) or 16 pins (PCF8575) as
pins for your projects. Within ESPHome they emulate a real internal GPIO pin
and can therefore be used with many of ESPHome's components such as the GPIO
binary sensor or GPIO switch.
Any option accepting a :ref:`Pin Schema <config-pin_schema>` can theoretically be used, but some more
complicated components that do communication through this I/O expander will
not work.
.. figure:: images/pcf8574-full.jpg
:align: center
:width: 80.0%
PCF8574 I/O Expander.
.. _SparkFun: https://www.sparkfun.com/products/retired/8130
.. code-block:: yaml
# Example configuration entry
pcf8574:
- id: 'pcf8574_hub'
address: 0x21
pcf8575: false
# Individual outputs
switch:
- platform: gpio
name: "PCF8574 Pin #0"
pin:
pcf8574: pcf8574_hub
# Use pin number 0
number: 0
# One of INPUT or OUTPUT
mode:
output: true
inverted: false
Configuration variables:
************************
- **id** (**Required**, :ref:`config-id`): The id to use for this PCF8574 component.
- **address** (*Optional*, int): The I²C address of the driver.
Defaults to ``0x21``.
- **pcf8575** (*Optional*, boolean): Whether this is a 16-pin PCF8575. Defaults to ``false``.
Pin configuration variables:
****************************
- **pcf8574** (**Required**, :ref:`config-id`): The id of the PCF8574 component of the pin.
- **number** (**Required**, int): The pin number.
- **inverted** (*Optional*, boolean): If all read and written values
should be treated as inverted. Defaults to ``false``.
- **mode** (*Optional*, string): A pin mode to set for the pin at. One of ``INPUT`` or ``OUTPUT``.
See Also
--------
- :ref:`i2c`
- :doc:`switch/gpio`
- :doc:`binary_sensor/gpio`
- `PCF8574 Arduino Library <https://github.com/skywodd/pcf8574_arduino_library>`__ by `Fabien Batteix <https://github.com/skywodd>`__
- :apiref:`pcf8574/pcf8574.h`
- :ghedit:`Edit`