esphome-docs/components/sensor/sgp40.rst
2021-11-29 07:57:01 +13:00

73 lines
2.5 KiB
ReStructuredText

SGP40 Volatile Organic Compound Sensor
======================================
.. seo::
:description: Instructions for setting up SGP40 Volatile Organic Compound sensor
:image: sgp40.jpg
The ``sgp40`` sensor platform allows you to use your Sensirion SGP40 VOC sensor
(`datasheet <https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/9_Gas_Sensors/Sensirion_Gas_Sensors_SGP40_Datasheet.pdf>`__) with ESPHome.
The :ref:`I²C Bus <i2c>` is required to be set up in your configuration for this sensor to work.
.. note::
This sensor need to be driven at a rate of 1Hz. Because of this, the
sensor will be read out on device once a second separately from the
update_interval. The state will be reported to other components, or
the front end at the update_interval, saving wifi power and network
communication.
.. figure:: images/sgp40.jpg
:align: center
:width: 80.0%
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: sgp40
name: "Workshop VOC"
Configuration variables:
------------------------
- **name** (**Required**, string): The name for the CO₂eq sensor.
- **id** (*Optional*, :ref:`config-id`): Set the ID of this sensor for use in lambdas.
- **update_interval** (*Optional*, :ref:`config-time`): The interval to check the sensor. Defaults to ``60s``
- **store_baseline** (*Optional*, boolean): Stores and retrieves the baseline information for quicker startups. Defaults to ``true``
- **compensation** (*Optional*): The block containing sensors used for compensation. If not set defaults will be used.
- **temperature_source** (*Optional*, :ref:`config-id`): Give an external temperature sensor ID
here. This can improve the sensor's internal calculations. Defaults to ``25``
- **humidity_source** (*Optional*, :ref:`config-id`): Give an external humidity sensor ID
here. This can improve the sensor's internal calculations. Defaults to ``50``
- All other options from :ref:`Sensor <config-sensor>`.
Example With Compensation
-------------------------
.. code-block:: yaml
# Example configuration entry
sensor:
- platform: sgp40
name: "Workshop VOC"
update_interval: 5s
compensation:
humidity_source: dht1_hum
temperature_source: dht1_temp
See Also
--------
- :ref:`sensor-filters`
- :doc:`dht`
- :doc:`dht12`
- :doc:`hdc1080`
- :doc:`htu21d`
- :doc:`sht3xd`
- :apiref:`sgp40/sgp40.h`
- :ghedit:`Edit`