mirror of
https://github.com/esphome/esphome-docs.git
synced 2024-12-26 17:27:47 +01:00
adea670924
* Added docs for mask setting on rc_switch_raw and fixed ref links * Lint * Docs updated to ignore bit approach for rc_switch_raw
211 lines
9.8 KiB
ReStructuredText
211 lines
9.8 KiB
ReStructuredText
Remote Receiver
|
|
===============
|
|
|
|
.. seo::
|
|
:description: Instructions for setting up remote receiver binary sensors for infrared and RF codes.
|
|
:image: remote.png
|
|
:keywords: RF, infrared
|
|
|
|
The ``remote_receiver`` component lets you receive and decode any remote signal, these can
|
|
for example be infrared remotes or 433MHz signals.
|
|
|
|
The component is split up into two parts: the remote receiver hub which
|
|
handles setting the pin and some other settings, and individual
|
|
:ref:`remote receiver binary sensors <remote-receiver-binary-sensor>`
|
|
which will trigger when they hear their own configured signal.
|
|
|
|
**See** :ref:`remote-setting-up-infrared` **and** :ref:`remote-setting-up-rf` **for set up guides.**
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
pin: GPIO32
|
|
dump: all
|
|
|
|
Configuration variables:
|
|
------------------------
|
|
|
|
- **pin** (**Required**, :ref:`config-pin`): The pin to receive the remote signal on.
|
|
- **dump** (*Optional*, list): Decode and dump these remote codes in the logs. Set to ``all`` to
|
|
dump all available codecs:
|
|
|
|
- **lg**: Decode and dump LG infrared codes.
|
|
- **nec**: Decode and dump NEC infrared codes.
|
|
- **panasonic**: Decode and dump Panasonic infrared codes.
|
|
- **jvc**: Decode and dump JVC infrared codes.
|
|
- **samsung**: Decode and dump Samsung infrared codes.
|
|
- **sony**: Decode and dump Sony infrared codes.
|
|
- **rc_switch**: Decode and dump RCSwitch RF codes.
|
|
- **rc5**: Decode and dump RC5 IR codes.
|
|
- **raw**: Print all remote codes in their raw form. Useful for using arbitrary protocols.
|
|
|
|
- **tolerance** (*Optional*, int): The percentage that the remote signal lengths can deviate in the
|
|
decoding process. Defaults to ``25%``.
|
|
- **buffer_size** (*Optional*, int): The size of the internal buffer for storing the remote codes. Defaults to ``10kb``
|
|
on the ESP32 and ``1kb`` on the ESP8266.
|
|
- **filter** (*Optional*, :ref:`time <config-time>`): Filter any pulses that are shorter than this. Useful for removing
|
|
glitches from noisy signals. Defaults to ``10us``.
|
|
- **idle** (*Optional*, :ref:`time <config-time>`): The amount of time that a signal should remain stable (i.e. not
|
|
change) for it to be considered complete. Defaults to ``10ms``.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation. Use this if you have
|
|
multiple remote transmitters.
|
|
|
|
Automations:
|
|
|
|
- **on_jvc** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
JVC remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::JVCData`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_lg** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
LG remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::LGData`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_nec** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
NEC remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::NECData`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_sony** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
NEC remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::SonyData`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_raw** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
raw remote code has been decoded. A variable ``x`` of type ``std::vector<int>``
|
|
is passed to the automation for use in lambdas.
|
|
- **on_rc5** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
RC5 remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::RC5Data`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_samsung** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
samsung remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::SamsungData`
|
|
is passed to the automation for use in lambdas.
|
|
- **on_panasonic** (*Optional*, :ref:`Automation <automation>`): An automation to perform when a
|
|
panasonic remote code has been decoded. A variable ``x`` of type :apiclass:`remote_base::PanasonicData`
|
|
is passed to the automation for use in lambdas.
|
|
|
|
.. _remote-receiver-binary-sensor:
|
|
|
|
Binary Sensor
|
|
-------------
|
|
|
|
The ``remote_receiver`` binary sensor lets you track when a button on a remote control is pressed.
|
|
|
|
Each time the pre-defined signal is received, the binary sensor will briefly go ON and
|
|
then immediately OFF.
|
|
|
|
.. code-block:: yaml
|
|
|
|
# Example configuration entry
|
|
remote_receiver:
|
|
pin: GPIO32
|
|
dump: all
|
|
|
|
binary_sensor:
|
|
- platform: remote_receiver
|
|
name: "Panasonic Remote Input"
|
|
panasonic:
|
|
address: 0x4004
|
|
command: 0x100BCBD
|
|
|
|
Configuration variables:
|
|
************************
|
|
|
|
- **name** (**Required**, string): The name for the binary sensor.
|
|
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
|
|
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
|
|
|
|
Remote code selection (exactly one of these has to be included):
|
|
|
|
- **jvc**: Trigger on a decoded JVC remote code with the given data.
|
|
|
|
- **data** (**Required**, int): The JVC code to trigger on, see dumper output for more info.
|
|
|
|
- **lg**: Trigger on a decoded LG remote code with the given data.
|
|
|
|
- **data** (**Required**, int): The LG code to trigger on, see dumper output for more info.
|
|
- **nbits** (*Optional*, int): The number of bits of the remote code. Defaults to ``28``.
|
|
|
|
- **nec**: Trigger on a decoded NEC remote code with the given data.
|
|
|
|
- **address** (**Required**, int): The address to trigger on, see dumper output for more info.
|
|
- **command** (**Required**, int): The NEC command to listen for.
|
|
|
|
- **sony**: Trigger on a decoded Sony remote code with the given data.
|
|
|
|
- **data** (**Required**, int): The Sony code to trigger on, see dumper output for more info.
|
|
- **nbits** (*Optional*, int): The number of bits of the remote code. Defaults to ``12``.
|
|
|
|
- **raw**: Trigger on a raw remote code with the given code.
|
|
|
|
- **code** (**Required**, list): The code to listen for, see :ref:`remote_transmitter-transmit_raw`
|
|
for more info. Usually you only need to copy this directly from the dumper output.
|
|
|
|
- **rc5**: Trigger on a decoded RC5 remote code with the given data.
|
|
|
|
- **address** (**Required**, int): The address to trigger on, see dumper output for more info.
|
|
- **command** (**Required**, int): The RC5 command to listen for.
|
|
|
|
- **samsung**: Trigger on a decoded Samsung remote code with the given data.
|
|
|
|
- **data** (**Required**, int): The data to trigger on, see dumper output for more info.
|
|
|
|
- **panasonic**: Trigger on a decoded Panasonic remote code with the given data.
|
|
|
|
- **address** (**Required**, int): The address to trigger on, see dumper output for more info.
|
|
- **command** (**Required**, int): The command.
|
|
|
|
- **rc_switch_raw**: Trigger on a decoded RC Switch raw remote code with the given data.
|
|
|
|
- **code** (**Required**, string): The remote code to listen for, copy this from the dumper output. To ignore a bit
|
|
in the received data, use ``x`` at that place in the **code**.
|
|
- **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info.
|
|
|
|
- **rc_switch_type_a**: Trigger on a decoded RC Switch Type A remote code with the given data.
|
|
|
|
- **group** (**Required**, string): The group, binary string.
|
|
- **device** (**Required**, string): The device in the group, binary string.
|
|
- **state** (**Required**, boolean): The on/off state to trigger on.
|
|
- **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info.
|
|
|
|
- **rc_switch_type_b**: Trigger on a decoded RC Switch Type B remote code with the given data.
|
|
|
|
- **address** (**Required**, int): The address, int from 1 to 4.
|
|
- **channel** (**Required**, int): The channel, int from 1 to 4.
|
|
- **state** (**Required**, boolean): The on/off state to trigger on.
|
|
- **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info.
|
|
|
|
- **rc_switch_type_c**: Trigger on a decoded RC Switch Type C remote code with the given data.
|
|
|
|
- **family** (**Required**, string): The family. Range is ``a`` to ``p``.
|
|
- **group** (**Required**, int): The group. Range is 1 to 4.
|
|
- **device** (**Required**, int): The device. Range is 1 to 4.
|
|
- **state** (**Required**, boolean): The on/off state to trigger on.
|
|
- **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info.
|
|
|
|
- **rc_switch_type_d**: Trigger on a decoded RC Switch Type D remote code with the given data.
|
|
|
|
- **group** (**Required**, int): The group. Range is 1 to 4.
|
|
- **device** (**Required**, int): The device. Range is 1 to 3.
|
|
- **state** (**Required**, boolean): The on/off state to trigger on.
|
|
- **protocol** (*Optional*): The RC Switch protocol to use, see :ref:`remote_transmitter-rc_switch-protocol` for more info.
|
|
|
|
.. note::
|
|
|
|
For the Sonoff RF Bridge you can use `this hack <https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-RF-Bridge---Direct-Hack>`__
|
|
created by the Github user wildwiz. Then use this configuration for the remote receiver/transmitter hubs:
|
|
|
|
.. code-block:: yaml
|
|
|
|
remote_receiver:
|
|
pin: 4
|
|
dump: all
|
|
|
|
remote_transmitter:
|
|
pin: 5
|
|
carrier_duty_percent: 100%
|
|
|
|
See Also
|
|
--------
|
|
|
|
- :doc:`index`
|
|
- :doc:`/components/remote_transmitter`
|
|
- `RCSwitch <https://github.com/sui77/rc-switch>`__ by `Suat Özgür <https://github.com/sui77>`__
|
|
- `IRRemoteESP8266 <https://github.com/markszabo/IRremoteESP8266/>`__ by `Mark Szabo-Simon <https://github.com/markszabo>`__
|
|
- :apiref:`remote/remote_receiver.h`
|
|
- :ghedit:`Edit`
|