esphome-docs/components/binary_sensor/ttp229.rst
2019-05-13 13:10:12 +02:00

96 lines
2.8 KiB
ReStructuredText

TTP229 Capacitive Touch Sensor
==============================
.. seo::
:description: Instructions for setting up TTP229 Capacitive Touch Sensor
:image: ttp229.jpg
:keywords: TTP229
The ``ttp229`` component allows you to use your TTP229 `datasheet <https://www.tontek.com.tw/uploads/product/106/TTP229-LSF_V1.0_EN.pdf>`__
Capacitive Touch Sensor with ESPHome.
There are two types of this sensor:
- **ttp229_lsf**: The :ref:`I²C <i2c>` version of the sensor, uses SDA+SCL pins.
- **ttp229_bsf**: The pin-based version of the sensor, uses SDO+SCL pins.
.. figure:: images/ttp229-full.jpg
:align: center
:width: 50.0%
TTP229 Capacitive Touch Sensor. Image by `RobotDyn`_.
.. _RobotDyn: https://www.tinytronics.nl/shop/nl/sensoren/touch/robotdyn-touch-module-ttp229-lsf-16-kanaals
``ttp229_lsf`` Type
-------------------
.. code-block:: yaml
# Example configuration entry
ttp229_lsf:
binary_sensor:
- platform: ttp229_lsf
name: TTP229 Channel 0
channel: 0
Configuration variables:
************************
The configuration is made up of two parts: The central component, and individual Binary sensors per channel.
Base Configuration:
- **id** (*Optional*, :ref:`config-id`): Manually set the ID of this sensor.
Binary Sensor Configuration:
- **name** (**Required**, string): The name of the binary sensor.
- **channel** (**Required**, integer): The channel number at the ttp229 the touchkey is connected to.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
``ttp229_bsf`` Type
-------------------
.. code-block:: yaml
# Example configuration entry
ttp229_bsf:
sdo_pin: D0
scl_pin: D1
binary_sensor:
- platform: ttp229_bsf
name: TTP229 Channel 0
channel: 0
Configuration variables:
************************
The configuration is made up of two parts: The central component, and individual Binary sensors per channel.
Base Configuration:
- **sdo_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin the
SDO pin is connected to.
- **scl_pin** (**Required**, :ref:`Pin Schema <config-pin_schema>`): The pin the
SCL pin is connected to.
- **id** (*Optional*, :ref:`config-id`): Manually set the ID of this component.
Binary Sensor Configuration:
- **name** (**Required**, string): The name of the binary sensor.
- **channel** (**Required**, integer): The channel number at the ttp229 the touchkey is connected to.
- **id** (*Optional*, :ref:`config-id`): Manually specify the ID used for code generation.
- All other options from :ref:`Binary Sensor <config-binary_sensor>`.
See Also
--------
- :ref:`sensor-filters`
- :apiref:`ttp229_lsf/ttp229_lsf.h`
- :apiref:`ttp229_bsf/ttp229_bsf.h`
- :ghedit:`Edit`