esphome-docs/components/sensor/mopeka_pro_check.rst

159 lines
5.2 KiB
ReStructuredText

Mopeka Pro Check BLE Sensor
===========================
.. seo::
:description: Instructions for setting up Mopeka Pro Check or Lippert Propane Tank bluetooth-based sensors in ESPHome.
:image: mopeka_pro_check.jpg
:keywords: Mopeka, Mopeka Pro Check, Mopeka Pro Plus, Mopeka Pro Universal, Lippert, Lippert Propane, Lippert Propane Sensor, Lippert Propane Tank Sensor, BLE, Bluetooth
The ``mopeka_pro_check`` sensor platform lets you track the output of Mopeka Pro
Check LP, Mopeka Pro Plus, Mopeka Pro Universal or Lippert Propane Tank Sensors, Bluetooth Low
Energy devices using the :doc:`/components/esp32_ble_tracker`. This component
will track the tank level, distance, temperature, and battery percentage of a
device every time the sensor sends out a BLE broadcast.
.. warning::
This sensor component only supports the following sensors:
+ Mopeka Pro Check devices
+ Mopeka Pro Plus devices
+ Mopeka Pro Check Universal Sensor
+ Lippert Propane Tank Sensor, part number 2021130655
Sensors are calibrated for propane only.
See :doc:`/components/sensor/mopeka_std_check` for original Mopeka Check sensors support.
.. figure:: images/mopeka_pro_check.jpg
:align: center
Mopeka Pro Check LP over BLE.
.. figure:: images/mopeka_pro_check_lippert.jpg
:align: center
Lippert™ Propane Tank Sensor
The original Mopeka Check sensors are not supported.
Mopeka Pro Check LP over BLE:
-----------------------------
.. code-block:: yaml
esp32_ble_tracker:
sensor:
# Example using 20lb vertical propane tank.
- platform: mopeka_pro_check
mac_address: D3:75:F2:DC:16:91
tank_type: 20LB_V
temperature:
name: "Propane test temp"
level:
name: "Propane test level"
distance:
name: "Propane test distance"
battery_level:
name: "Propane test battery level"
# Custom example - user defined empty / full points
- platform: mopeka_pro_check
mac_address: D3:75:F2:DC:16:91
tank_type: CUSTOM
custom_distance_full: 40cm
custom_distance_empty: 10mm
temperature:
name: "Propane c test temp"
level:
name: "Propane c test level"
distance:
name: "Propane c test distance"
battery_level:
name: "Propane c test battery level"
Configuration variables:
------------------------
- **mac_address** (**Required**, MAC Address): The MAC address of the Mopeka/Lippert
device.
- **tank_type** (**Required**): The tank type the sensor is measuring. See below.
- **custom_distance_full** (*Optional*): distance sensor will read when it should be
considered full (100%). This is only used when tank_type = CUSTOM
- **custom_distance_empty** (*Optional*): distance sensor will read when it should be
considered empty (0%). This is only used when tank_type = CUSTOM
- **level** (*Optional*): The percentage of full for the tank sensor
- All options from :ref:`Sensor <config-sensor>`.
- **distance** (*Optional*): The raw distance/depth of the liquid for the sensor in mm.
- All options from :ref:`Sensor <config-sensor>`.
- **temperature** (*Optional*): The information for the temperature sensor.
This temperature is on the sensor and is not calibrated to ambient temperature.
- All options from :ref:`Sensor <config-sensor>`.
- **battery_level** (*Optional*): The information for the battery percentage
sensor. Sensor uses a standard CR2032 battery.
- All options from :ref:`Sensor <config-sensor>`.
Tank Types
----------
Currently supported Tank types are:
- ``20LB_V`` - 20 LB vertical tank
- ``30LB_V`` - 30 LB vertical tank
- ``40LB_V`` - 40 LB vertical tank
- ``EUROPE_6KG`` - 6kg vertical tank
- ``EUROPE_11KG`` - 11kg vertical tank
- ``EUROPE_14KG`` - 14kg vertical tank
- ``CUSTOM`` - Allows you to define your own full and empty points
Setting Up Devices
------------------
To set up the sensor devices you first need to find the MAC Address so that
ESPHome can identify it. First, create a simple configuration with the ``esp32_ble_tracker``
and the ``mopeka_ble`` component like so:
.. code-block:: yaml
esp32_ble_tracker:
mopeka_ble:
After uploading, the ESP32 will immediately try to scan for BLE devices. Press and hold the sync button for it to be identified.
Or alternativly set the configuration flag ``show_sensors_without_sync: true`` to see all devices.
For all sensors found the ``mopeka_ble`` component will print a message like this one:
.. code::
[20:43:26][I][mopeka_ble:074]: MOPEKA PRO (NRF52) SENSOR FOUND: D3:75:F2:DC:16:91
Then just copy the address (``D3:75:F2:DC:16:91``) into a new
``sensor.mopeka_pro_check`` platform entry like in the configuration example at the top.
.. note::
The ESPHome Mopeka Pro Check BLE integration listens passively to packets the Mopeka/Lippert device sends by itself.
ESPHome therefore has no impact on the battery life of the device.
See Also
--------
- :doc:`/components/esp32_ble_tracker`
- :doc:`/components/sensor/index`
- :apiref:`mopeka_pro_check/mopeka_pro_check.h`
- `Mopeka <https://www.mopekaiot.com/shop>`
- `Lippert <https://store.lci1.com/lippert-propane-tank-sensor-2021130655>`__
- :ghedit:`Edit`